From: Markus Mayer <code@mmayer.net>
To: Viresh Kumar <viresh.kumar@linaro.org>,
"Rafael J . Wysocki" <rjw@rjwysocki.net>
Cc: Power Management List <linux-pm@vger.kernel.org>,
Broadcom Kernel List <bcm-kernel-feedback-list@broadcom.com>,
Linux Kernel Mailing List <linux-kernel@vger.kernel.org>,
Markus Mayer <mmayer@broadcom.com>
Subject: [PATCH v2 2/2] cpufreq: stats: clear statistics
Date: Fri, 4 Nov 2016 09:55:36 -0700 [thread overview]
Message-ID: <20161104165536.20088-3-code@mmayer.net> (raw)
In-Reply-To: <20161104165536.20088-1-code@mmayer.net>
From: Markus Mayer <mmayer@broadcom.com>
Allow CPUfreq statistics to be cleared by writing anything to
/sys/.../cpufreq/stats/reset.
Signed-off-by: Markus Mayer <mmayer@broadcom.com>
---
Documentation/cpu-freq/cpufreq-stats.txt | 6 ++++++
drivers/cpufreq/cpufreq_stats.c | 22 ++++++++++++++++++++++
2 files changed, 28 insertions(+)
diff --git a/Documentation/cpu-freq/cpufreq-stats.txt b/Documentation/cpu-freq/cpufreq-stats.txt
index 8d9773f..3c355f6 100644
--- a/Documentation/cpu-freq/cpufreq-stats.txt
+++ b/Documentation/cpu-freq/cpufreq-stats.txt
@@ -44,11 +44,17 @@ the stats driver insertion.
total 0
drwxr-xr-x 2 root root 0 May 14 16:06 .
drwxr-xr-x 3 root root 0 May 14 15:58 ..
+--w------- 1 root root 4096 May 14 16:06 reset
-r--r--r-- 1 root root 4096 May 14 16:06 time_in_state
-r--r--r-- 1 root root 4096 May 14 16:06 total_trans
-r--r--r-- 1 root root 4096 May 14 16:06 trans_table
--------------------------------------------------------------------------------
+- reset
+Write-only attribute that can be used to reset the stat counters. This can be
+useful for evaluating system behaviour under different governors without the
+need for a reboot.
+
- time_in_state
This gives the amount of time spent in each of the frequencies supported by
this CPU. The cat output will have "<frequency> <time>" pair in each line, which
diff --git a/drivers/cpufreq/cpufreq_stats.c b/drivers/cpufreq/cpufreq_stats.c
index 06d3abd..66419e6 100644
--- a/drivers/cpufreq/cpufreq_stats.c
+++ b/drivers/cpufreq/cpufreq_stats.c
@@ -41,6 +41,18 @@ static int cpufreq_stats_update(struct cpufreq_stats *stats)
return 0;
}
+static void cpufreq_stats_clear_table(struct cpufreq_stats *stats)
+{
+ unsigned int count = stats->max_state;
+
+ memset(stats->time_in_state, 0, count * sizeof(u64));
+#ifdef CONFIG_CPU_FREQ_STAT_DETAILS
+ memset(stats->trans_table, 0, count * count * sizeof(int));
+#endif
+ stats->last_time = get_jiffies_64();
+ stats->total_trans = 0;
+}
+
static ssize_t show_total_trans(struct cpufreq_policy *policy, char *buf)
{
return sprintf(buf, "%d\n", policy->stats->total_trans);
@@ -64,6 +76,14 @@ static ssize_t show_time_in_state(struct cpufreq_policy *policy, char *buf)
return len;
}
+static ssize_t store_reset(struct cpufreq_policy *policy, const char *buf,
+ size_t count)
+{
+ /* We don't care what is written to the attribute. */
+ cpufreq_stats_clear_table(policy->stats);
+ return count;
+}
+
#ifdef CONFIG_CPU_FREQ_STAT_DETAILS
static ssize_t show_trans_table(struct cpufreq_policy *policy, char *buf)
{
@@ -113,10 +133,12 @@ cpufreq_freq_attr_ro(trans_table);
cpufreq_freq_attr_ro(total_trans);
cpufreq_freq_attr_ro(time_in_state);
+cpufreq_freq_attr_wr_perm(reset, 0200);
static struct attribute *default_attrs[] = {
&total_trans.attr,
&time_in_state.attr,
+ &reset.attr,
#ifdef CONFIG_CPU_FREQ_STAT_DETAILS
&trans_table.attr,
#endif
--
2.7.4
next prev parent reply other threads:[~2016-11-04 16:55 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-11-04 16:55 [PATCH v2 0/2] cpufreq: stats: clear statistics Markus Mayer
2016-11-04 16:55 ` [PATCH v2 1/2] cpufreq: add new attribute type cpufreq_freq_attr_wr_perm() Markus Mayer
2016-11-07 4:33 ` Viresh Kumar
2016-11-07 4:35 ` Viresh Kumar
2016-11-04 16:55 ` Markus Mayer [this message]
2016-11-07 4:38 ` [PATCH v2 2/2] cpufreq: stats: clear statistics Viresh Kumar
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20161104165536.20088-3-code@mmayer.net \
--to=code@mmayer.net \
--cc=bcm-kernel-feedback-list@broadcom.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pm@vger.kernel.org \
--cc=mmayer@broadcom.com \
--cc=rjw@rjwysocki.net \
--cc=viresh.kumar@linaro.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).