From mboxrd@z Thu Jan 1 00:00:00 1970 From: Wolfram Sang Subject: [PATCH v3 4/4] arm64: dts: r8a7796: Add R-Car Gen3 thermal support Date: Mon, 28 Nov 2016 22:09:24 +0100 Message-ID: <20161128210924.2921-5-wsa+renesas@sang-engineering.com> References: <20161128210924.2921-1-wsa+renesas@sang-engineering.com> Return-path: Received: from www.zeus03.de ([194.117.254.33]:39070 "EHLO mail.zeus03.de" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1754874AbcK1VKK (ORCPT ); Mon, 28 Nov 2016 16:10:10 -0500 In-Reply-To: <20161128210924.2921-1-wsa+renesas@sang-engineering.com> Sender: linux-pm-owner@vger.kernel.org List-Id: linux-pm@vger.kernel.org To: linux-pm@vger.kernel.org Cc: linux-renesas-soc@vger.kernel.org, Zhang Rui , Eduardo Valentin , Khiem Nguyen , Kuninori Morimoto , Wolfram Sang , Hien Dang , Thao Nguyen Signed-off-by: Hien Dang Signed-off-by: Thao Nguyen Signed-off-by: Khiem Nguyen Signed-off-by: Wolfram Sang --- Changes since last version: * DTSI updates refactored to meet the above changes arch/arm64/boot/dts/renesas/r8a7796.dtsi | 58 ++++++++++++++++++++++++++++++++ 1 file changed, 58 insertions(+) diff --git a/arch/arm64/boot/dts/renesas/r8a7796.dtsi b/arch/arm64/boot/dts/renesas/r8a7796.dtsi index 9217da98352565..5261f0f77ce2e9 100644 --- a/arch/arm64/boot/dts/renesas/r8a7796.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a7796.dtsi @@ -251,5 +251,63 @@ power-domains = <&sysc R8A7796_PD_ALWAYS_ON>; status = "disabled"; }; + + tsc: thermal@e6198000 { + compatible = "renesas,r8a7796-thermal"; + reg = <0 0xe6198000 0 0x68>, + <0 0xe61a0000 0 0x5c>, + <0 0xe61a8000 0 0x5c>; + interrupts = , + , + ; + clocks = <&cpg CPG_MOD 522>; + power-domains = <&sysc R8A7796_PD_ALWAYS_ON>; + #thermal-sensor-cells = <1>; + status = "okay"; + }; + + thermal-zones { + sensor_thermal1: sensor-thermal1 { + polling-delay-passive = <250>; + polling-delay = <1000>; + thermal-sensors = <&tsc 0>; + + trips { + sensor1_crit: sensor1-crit { + temperature = <90000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + }; + + sensor_thermal2: sensor-thermal2 { + polling-delay-passive = <250>; + polling-delay = <1000>; + thermal-sensors = <&tsc 1>; + + trips { + sensor2_crit: sensor2-crit { + temperature = <90000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + }; + + sensor_thermal3: sensor-thermal3 { + polling-delay-passive = <250>; + polling-delay = <1000>; + thermal-sensors = <&tsc 2>; + + trips { + sensor3_crit: sensor3-crit { + temperature = <90000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + }; + }; }; }; -- 2.10.2