linux-pm.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Wolfram Sang <wsa+renesas@sang-engineering.com>
To: linux-pm@vger.kernel.org
Cc: linux-renesas-soc@vger.kernel.org,
	Zhang Rui <rui.zhang@intel.com>,
	Eduardo Valentin <edubezval@gmail.com>,
	Khiem Nguyen <khiem.nguyen.xt@renesas.com>,
	Kuninori Morimoto <kuninori.morimoto.gx@gmail.com>,
	Geert Uytterhoeven <geert@linux-m68k.org>,
	Wolfram Sang <wsa+renesas@sang-engineering.com>,
	Hien Dang <hien.dang.eb@renesas.com>,
	Thao Nguyen <thao.nguyen.yb@rvc.renesas.com>
Subject: [PATCH v4 4/4] arm64: dts: r8a7796: Add R-Car Gen3 thermal support
Date: Thu,  1 Dec 2016 23:04:42 +0100	[thread overview]
Message-ID: <20161201220442.22057-5-wsa+renesas@sang-engineering.com> (raw)
In-Reply-To: <20161201220442.22057-1-wsa+renesas@sang-engineering.com>

Signed-off-by: Hien Dang <hien.dang.eb@renesas.com>
Signed-off-by: Thao Nguyen <thao.nguyen.yb@rvc.renesas.com>
Signed-off-by: Khiem Nguyen <khiem.nguyen.xt@renesas.com>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
---
 arch/arm64/boot/dts/renesas/r8a7796.dtsi | 58 ++++++++++++++++++++++++++++++++
 1 file changed, 58 insertions(+)

diff --git a/arch/arm64/boot/dts/renesas/r8a7796.dtsi b/arch/arm64/boot/dts/renesas/r8a7796.dtsi
index 9217da98352565..5261f0f77ce2e9 100644
--- a/arch/arm64/boot/dts/renesas/r8a7796.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a7796.dtsi
@@ -251,5 +251,63 @@
 			power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
 			status = "disabled";
 		};
+
+		tsc: thermal@e6198000 {
+			compatible = "renesas,r8a7796-thermal";
+			reg = <0 0xe6198000 0 0x68>,
+			      <0 0xe61a0000 0 0x5c>,
+			      <0 0xe61a8000 0 0x5c>;
+			interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 522>;
+			power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+			#thermal-sensor-cells = <1>;
+			status = "okay";
+		};
+
+		thermal-zones {
+			sensor_thermal1: sensor-thermal1 {
+				polling-delay-passive = <250>;
+				polling-delay = <1000>;
+				thermal-sensors = <&tsc 0>;
+
+				trips {
+					sensor1_crit: sensor1-crit {
+						temperature = <90000>;
+						hysteresis = <2000>;
+						type = "critical";
+					};
+				};
+			};
+
+			sensor_thermal2: sensor-thermal2 {
+				polling-delay-passive = <250>;
+				polling-delay = <1000>;
+				thermal-sensors = <&tsc 1>;
+
+				trips {
+					sensor2_crit: sensor2-crit {
+						temperature = <90000>;
+						hysteresis = <2000>;
+						type = "critical";
+					};
+				};
+			};
+
+			sensor_thermal3: sensor-thermal3 {
+				polling-delay-passive = <250>;
+				polling-delay = <1000>;
+				thermal-sensors = <&tsc 2>;
+
+				trips {
+					sensor3_crit: sensor3-crit {
+						temperature = <90000>;
+						hysteresis = <2000>;
+						type = "critical";
+					};
+				};
+			};
+		};
 	};
 };
-- 
2.10.2


  parent reply	other threads:[~2016-12-01 22:04 UTC|newest]

Thread overview: 13+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-12-01 22:04 [PATCH v4 0/4] thermal: add driver for R-Car Gen3 Wolfram Sang
2016-12-01 22:04 ` [PATCH v4 1/4] thermal: rcar_gen3_thermal: Document the " Wolfram Sang
2016-12-01 22:04 ` [PATCH v4 2/4] thermal: rcar_gen3_thermal: Add R-Car Gen3 thermal driver Wolfram Sang
2016-12-07  1:01   ` Eduardo Valentin
2016-12-07  9:06     ` Wolfram Sang
2016-12-13  3:22       ` Eduardo Valentin
2016-12-07  1:15   ` Eduardo Valentin
2016-12-01 22:04 ` [PATCH v4 3/4] arm64: dts: r8a7795: Add R-Car Gen3 thermal support Wolfram Sang
2016-12-01 22:04 ` Wolfram Sang [this message]
2016-12-02 20:44 ` [PATCH v4 5/4] thermal: rcar_gen3_thermal: restrict to 64BIT Wolfram Sang
2016-12-07  0:39   ` Eduardo Valentin
2016-12-07  8:51     ` Wolfram Sang
2017-01-10 10:16 ` [PATCH v4 0/4] thermal: add driver for R-Car Gen3 Geert Uytterhoeven

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20161201220442.22057-5-wsa+renesas@sang-engineering.com \
    --to=wsa+renesas@sang-engineering.com \
    --cc=edubezval@gmail.com \
    --cc=geert@linux-m68k.org \
    --cc=hien.dang.eb@renesas.com \
    --cc=khiem.nguyen.xt@renesas.com \
    --cc=kuninori.morimoto.gx@gmail.com \
    --cc=linux-pm@vger.kernel.org \
    --cc=linux-renesas-soc@vger.kernel.org \
    --cc=rui.zhang@intel.com \
    --cc=thao.nguyen.yb@rvc.renesas.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).