From: Roger Shimizu <rogershimizu@gmail.com>
To: Sebastian Reichel <sre@kernel.org>,
linux-pm@vger.kernel.org, Andrew Lunn <andrew@lunn.ch>
Cc: Roger Shimizu <rogershimizu@gmail.com>,
Ryan Tandy <ryan@nardis.ca>, Martin Michlmayr <tbm@cyrius.com>,
Sylver Bruneau <sylver.bruneau@googlemail.com>,
Herbert Valerio Riedel <hvr@gnu.org>
Subject: [PATCH 0/3] make kurobox-pro be able to shutdown after device-tree migration
Date: Mon, 5 Dec 2016 21:45:25 +0900 [thread overview]
Message-ID: <20161205124528.2999-1-rogershimizu@gmail.com> (raw)
Dear Sebastian,
Kurobox-Pro (and variants) need more commands sending to UART1 to shutdown.
So here I make this patch series to let current qnap-poweroff implementation
be able to handle such case.
I already tested this change on Kurobox-Pro and Linkstation LS-GL devices,
with a modified device-tree file. (Previous device-tree of kurobox-pro invokes
restart-poweroff, so it simply restarts.)
Thank you and look forward to your feedback!
Cheers,
Roger
Roger Shimizu (3):
power: reset: make qnap-poweroff flexible on hello magic command to
uart1
power: reset: make qnap-poweroff flexible on length of power-off
command
power: reset: make qnap-poweroff support kurobox-pro
.../bindings/power/reset/qnap-poweroff.txt | 8 +-
drivers/power/reset/qnap-poweroff.c | 186 ++++++++++++++++++++-
2 files changed, 184 insertions(+), 10 deletions(-)
--
2.10.2
next reply other threads:[~2016-12-05 12:45 UTC|newest]
Thread overview: 44+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-12-05 12:45 Roger Shimizu [this message]
2016-12-05 12:45 ` [PATCH 1/3] power: reset: make qnap-poweroff flexible on hello magic command to uart1 Roger Shimizu
2016-12-05 12:45 ` [PATCH 2/3] power: reset: make qnap-poweroff flexible on length of power-off command Roger Shimizu
2016-12-05 12:45 ` [PATCH 3/3] power: reset: make qnap-poweroff support kurobox-pro Roger Shimizu
2016-12-06 17:34 ` [PATCH 0/3] make kurobox-pro be able to shutdown after device-tree migration Andrew Lunn
2016-12-07 17:24 ` [PATCH v1 " Roger Shimizu
2016-12-07 17:24 ` [PATCH v1 1/3] power: reset: make qnap-poweroff flexible on hello magic command to uart1 Roger Shimizu
2016-12-07 17:24 ` [PATCH v1 2/3] power: reset: make qnap-poweroff flexible on length of power-off command Roger Shimizu
2016-12-07 17:24 ` [PATCH v1 3/3] power: reset: make qnap-poweroff support kurobox-pro Roger Shimizu
2016-12-07 18:04 ` [PATCH v1 0/3] make kurobox-pro be able to shutdown after device-tree migration Andrew Lunn
2016-12-16 10:05 ` [PATCH v2] power: reset: add linkstation-reset driver Roger Shimizu
2016-12-19 0:34 ` Roger Shimizu
2016-12-19 15:38 ` Sebastian Reichel
2016-12-19 16:03 ` Andrew Lunn
2016-12-19 16:12 ` Roger Shimizu
2016-12-19 17:37 ` Roger Shimizu
[not found] ` <CAEQ9gEnQEHdcA4ox3teOXKcrdf2AAqUMp=A6W6c7nXhk4VrKiw-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2016-12-21 15:59 ` Sebastian Reichel
2016-12-21 16:41 ` Andrew Lunn
[not found] ` <20161221164136.GM30952-g2DYL2Zd6BY@public.gmane.org>
2016-12-22 14:49 ` Sebastian Reichel
2016-12-26 16:13 ` Roger Shimizu
2016-12-27 7:06 ` [PATCH v3 0/3] make kurobox-pro be able to shutdown after device-tree migration Roger Shimizu
2016-12-27 7:06 ` [PATCH v3 1/3] power: reset: add linkstation-reset driver Roger Shimizu
[not found] ` <20161227070611.14852-2-rogershimizu-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
2017-01-03 5:19 ` Florian Fainelli
2017-01-03 13:09 ` Andrew Lunn
2017-01-03 14:08 ` Roger Shimizu
[not found] ` <CAEQ9gE=MoQcr3eX0DAxZtvx0FW9pzgkUGjdxKHcsKwH7_+UsUw-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2017-01-03 18:39 ` Florian Fainelli
2016-12-27 7:06 ` [PATCH v3 2/3] DT: bingdings: power: reset: add linkstation-reset doc Roger Shimizu
2017-01-03 5:21 ` Florian Fainelli
2017-01-03 13:12 ` Andrew Lunn
2017-01-03 14:11 ` Roger Shimizu
2017-01-03 17:09 ` Rob Herring
2017-01-06 12:18 ` Roger Shimizu
2016-12-27 7:06 ` [PATCH v3 3/3] ARM: DT: add power-off support to linkstation lsgl and kuroboxpro Roger Shimizu
2017-01-07 15:04 ` [PATCH v4 0/2] make kurobox-pro be able to shutdown after device-tree migration Roger Shimizu
[not found] ` <20170107150451.17912-1-rogershimizu-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
2017-01-07 15:04 ` [PATCH v4 1/2] power: reset: add linkstation-reset driver Roger Shimizu
2017-01-08 17:02 ` Ryan Tandy
2017-01-09 3:31 ` Roger Shimizu
2017-01-09 5:43 ` Ryan Tandy
2017-01-18 12:08 ` Roger Shimizu
2017-01-19 4:43 ` Sebastian Reichel
2017-01-26 15:28 ` Gregory CLEMENT
2017-01-26 15:33 ` Roger Shimizu
2017-01-27 9:15 ` Gregory CLEMENT
2017-01-07 15:04 ` [PATCH v4 2/2] ARM: DT: add power-off support to linkstation lsgl and kuroboxpro Roger Shimizu
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20161205124528.2999-1-rogershimizu@gmail.com \
--to=rogershimizu@gmail.com \
--cc=andrew@lunn.ch \
--cc=hvr@gnu.org \
--cc=linux-pm@vger.kernel.org \
--cc=ryan@nardis.ca \
--cc=sre@kernel.org \
--cc=sylver.bruneau@googlemail.com \
--cc=tbm@cyrius.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).