From: Quentin Schulz <quentin.schulz@free-electrons.com>
To: sre@kernel.org, robh+dt@kernel.org, mark.rutland@arm.com,
wens@csie.org, linux@armlinux.org.uk,
maxime.ripard@free-electrons.com, lee.jones@linaro.org
Cc: Quentin Schulz <quentin.schulz@free-electrons.com>,
linux-pm@vger.kernel.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
thomas.petazzoni@free-electrons.com
Subject: [PATCH v2 00/11] add support for VBUS max current and min voltage limits AXP20X and AXP22X PMICs
Date: Fri, 9 Dec 2016 12:04:08 +0100 [thread overview]
Message-ID: <20161209110419.28981-1-quentin.schulz@free-electrons.com> (raw)
The X-Powers AXP209 and AXP20X PMICs are able to set a limit for the
VBUS power supply for both max current and min voltage supplied. This
series of patch adds the possibility to set these limits from sysfs.
Also, the AXP223 PMIC shares most of its behaviour with the AXP221 but
the former can set the VBUS power supply max current to 100mA, unlike
the latter. The AXP223 VBUS power supply driver used to probe on the
AXP221 compatible. This series of patch introduces a new compatible for
the AXP223 to be able to set the current max limit to 100mA.
With that new compatible, boards having the AXP223 see their DT updated
to use the VBUS power supply driver with the correct compatible.
This series of patch also migrates from of_device_is_compatible function
to the data field of of_device_id to identify the compatible used to
probe. This improves the code readability.
Mostly cosmetic changes in v2 and adding volatile and writeable regs to
AXP20X and AXP22X MFD cells for the VBUS power supply driver.
Quentin Schulz (11):
power: supply: axp20x_usb_power: use of_device_id data field instead
of device_is_compatible
mfd: axp20x: add volatile and writeable reg ranges for VBUS power
supply driver
power: supply: axp20x_usb_power: set min voltage and max current from
sysfs
Documentation: DT: binding: axp20x_usb_power: add axp223 compatible
power: supply: axp20x_usb_power: add 100mA max current limit for
AXP223
mfd: axp20x: add separate MFD cell for AXP223
ARM: dtsi: add DTSI for AXP223
ARM: dts: sun8i-a33-olinuxino: use AXP223 DTSI
ARM: dts: sun8i-a33-sinlinx-sina33: use AXP223 DTSI
ARM: dts: sun8i-r16-parrot: use AXP223 DTSI
ARM: dtsi: sun8i-reference-design-tablet: use AXP223 DTSI
.../bindings/power/supply/axp20x_usb_power.txt | 5 +
arch/arm/boot/dts/axp223.dtsi | 58 +++++++++++
arch/arm/boot/dts/sun8i-a33-olinuxino.dts | 2 +-
arch/arm/boot/dts/sun8i-a33-sinlinx-sina33.dts | 2 +-
arch/arm/boot/dts/sun8i-r16-parrot.dts | 2 +-
.../boot/dts/sun8i-reference-design-tablet.dtsi | 2 +-
drivers/mfd/axp20x.c | 32 +++++-
drivers/power/supply/axp20x_usb_power.c | 116 ++++++++++++++++++---
8 files changed, 197 insertions(+), 22 deletions(-)
create mode 100644 arch/arm/boot/dts/axp223.dtsi
--
2.9.3
next reply other threads:[~2016-12-09 11:04 UTC|newest]
Thread overview: 25+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-12-09 11:04 Quentin Schulz [this message]
2016-12-09 11:04 ` [PATCH v2 01/11] power: supply: axp20x_usb_power: use of_device_id data field instead of device_is_compatible Quentin Schulz
2016-12-14 15:38 ` Chen-Yu Tsai
2016-12-09 11:04 ` [PATCH v2 02/11] mfd: axp20x: add volatile and writeable reg ranges for VBUS power supply driver Quentin Schulz
[not found] ` <20161209110419.28981-3-quentin.schulz-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org>
2016-12-14 15:43 ` Chen-Yu Tsai
2016-12-19 12:28 ` Quentin Schulz
2016-12-09 11:04 ` [PATCH v2 03/11] power: supply: axp20x_usb_power: set min voltage and max current from sysfs Quentin Schulz
[not found] ` <20161209110419.28981-4-quentin.schulz-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org>
2016-12-14 15:45 ` Chen-Yu Tsai
2016-12-09 11:04 ` [PATCH v2 04/11] Documentation: DT: binding: axp20x_usb_power: add axp223 compatible Quentin Schulz
2016-12-12 15:51 ` Maxime Ripard
[not found] ` <20161209110419.28981-5-quentin.schulz-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org>
2016-12-12 18:44 ` Rob Herring
2016-12-14 16:12 ` Chen-Yu Tsai
2016-12-09 11:04 ` [PATCH v2 05/11] power: supply: axp20x_usb_power: add 100mA max current limit for AXP223 Quentin Schulz
2016-12-09 11:04 ` [PATCH v2 06/11] mfd: axp20x: add separate MFD cell " Quentin Schulz
2016-12-12 15:51 ` Maxime Ripard
2017-01-04 9:45 ` Lee Jones
2016-12-09 11:04 ` [PATCH v2 07/11] ARM: dtsi: add DTSI " Quentin Schulz
2016-12-09 11:04 ` [PATCH v2 08/11] ARM: dts: sun8i-a33-olinuxino: use AXP223 DTSI Quentin Schulz
2016-12-09 11:04 ` [PATCH v2 09/11] ARM: dts: sun8i-a33-sinlinx-sina33: " Quentin Schulz
2016-12-09 11:04 ` [PATCH v2 10/11] ARM: dts: sun8i-r16-parrot: " Quentin Schulz
2016-12-09 11:04 ` [PATCH v2 11/11] ARM: dtsi: sun8i-reference-design-tablet: " Quentin Schulz
2016-12-12 8:07 ` [PATCH v2 00/11] add support for VBUS max current and min voltage limits AXP20X and AXP22X PMICs Quentin Schulz
[not found] ` <20161209110419.28981-1-quentin.schulz-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org>
2016-12-17 15:54 ` Sebastian Reichel
2017-01-12 9:28 ` Maxime Ripard
2017-01-21 1:10 ` Chen-Yu Tsai
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20161209110419.28981-1-quentin.schulz@free-electrons.com \
--to=quentin.schulz@free-electrons.com \
--cc=devicetree@vger.kernel.org \
--cc=lee.jones@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pm@vger.kernel.org \
--cc=linux@armlinux.org.uk \
--cc=mark.rutland@arm.com \
--cc=maxime.ripard@free-electrons.com \
--cc=robh+dt@kernel.org \
--cc=sre@kernel.org \
--cc=thomas.petazzoni@free-electrons.com \
--cc=wens@csie.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox