linux-pm.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: "Niklas Söderlund" <niklas.soderlund@ragnatech.se>
To: linux-pm@vger.kernel.org,
	Wolfram Sang <wsa+renesas@sang-engineering.com>,
	Khiem Nguyen <khiem.nguyen.xt@renesas.com>,
	Kuninori Morimoto <kuninori.morimoto.gx@gmail.com>
Cc: linux-renesas-soc@vger.kernel.org,
	"Zhang Rui" <rui.zhang@intel.com>,
	"Eduardo Valentin" <edubezval@gmail.com>,
	"Geert Uytterhoeven" <geert@linux-m68k.org>,
	"Hien Dang" <hien.dang.eb@renesas.com>,
	"Niklas Söderlund" <niklas.soderlund+renesas@ragnatech.se>
Subject: [PATCHv5 1/5] thermal: rcar_gen3_thermal: Document the R-Car Gen3
Date: Mon, 12 Dec 2016 15:18:01 +0100	[thread overview]
Message-ID: <20161212141805.14946-2-niklas.soderlund@ragnatech.se> (raw)
In-Reply-To: <20161212141805.14946-1-niklas.soderlund@ragnatech.se>

From: Wolfram Sang <wsa+renesas@sang-engineering.com>

Signed-off-by: Hien Dang <hien.dang.eb@renesas.com>
Signed-off-by: Khiem Nguyen <khiem.nguyen.xt@renesas.com>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
---
 .../bindings/thermal/rcar-gen3-thermal.txt         | 56 ++++++++++++++++++++++
 1 file changed, 56 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/thermal/rcar-gen3-thermal.txt

diff --git a/Documentation/devicetree/bindings/thermal/rcar-gen3-thermal.txt b/Documentation/devicetree/bindings/thermal/rcar-gen3-thermal.txt
new file mode 100644
index 0000000..07a9713
--- /dev/null
+++ b/Documentation/devicetree/bindings/thermal/rcar-gen3-thermal.txt
@@ -0,0 +1,56 @@
+* DT bindings for Renesas R-Car Gen3 Thermal Sensor driver
+
+On R-Car Gen3 SoCs, the thermal sensor controllers (TSC) control the thermal
+sensors (THS) which are the analog circuits for measuring temperature (Tj)
+inside the LSI.
+
+Required properties:
+- compatible		: "renesas,<soctype>-thermal",
+			  Examples with soctypes are:
+			    - "renesas,r8a7795-thermal" (R-Car H3)
+			    - "renesas,r8a7796-thermal" (R-Car M3-W)
+- reg			: Address ranges of the thermal registers. Each sensor
+			  needs one address range. Sorting must be done in
+			  increasing order according to datasheet, i.e.
+			  TSC1, TSC2, ...
+- clocks		: Must contain a reference to the functional clock.
+- #thermal-sensor-cells : must be <1>.
+
+Optional properties:
+
+- interrupts           : interrupts routed to the TSC (3 for H3 and M3-W)
+- power-domain		: Must contain a reference to the power domain. This
+			  property is mandatory if the thermal sensor instance
+			  is part of a controllable power domain.
+
+Example:
+
+	tsc: thermal@e6198000 {
+		compatible = "renesas,r8a7795-thermal";
+		reg = <0 0xe6198000 0 0x68>,
+		      <0 0xe61a0000 0 0x5c>,
+		      <0 0xe61a8000 0 0x5c>;
+		interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cpg CPG_MOD 522>;
+		power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+		#thermal-sensor-cells = <1>;
+		status = "okay";
+	};
+
+	thermal-zones {
+		sensor_thermal1: sensor-thermal1 {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+			thermal-sensors = <&tsc 0>;
+
+			trips {
+				sensor1_crit: sensor1-crit {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+	};
-- 
2.10.2


  reply	other threads:[~2016-12-12 14:20 UTC|newest]

Thread overview: 19+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-12-12 14:18 [PATCHv5 0/5] thermal: add driver for R-Car Gen3 Niklas Söderlund
2016-12-12 14:18 ` Niklas Söderlund [this message]
2016-12-12 14:18 ` [PATCHv5 2/5] thermal: rcar_gen3_thermal: Add R-Car Gen3 thermal driver Niklas Söderlund
2016-12-12 21:45   ` Wolfram Sang
2016-12-13  8:25     ` Geert Uytterhoeven
2016-12-13  8:39       ` Wolfram Sang
2016-12-13 10:07         ` Niklas Söderlund
2016-12-13  3:50   ` Eduardo Valentin
2016-12-13  5:38     ` Wolfram Sang
2016-12-13  9:43     ` Niklas Söderlund
2016-12-14  4:38       ` Eduardo Valentin
2016-12-13  8:19   ` Geert Uytterhoeven
2016-12-13  9:53     ` Niklas Söderlund
2016-12-13 10:09       ` Geert Uytterhoeven
2016-12-12 14:18 ` [PATCHv5 3/5] arm64: dts: r8a7795: Add R-Car Gen3 thermal support Niklas Söderlund
2016-12-12 14:18 ` [PATCHv5 4/5] arm64: dts: r8a7796: " Niklas Söderlund
2016-12-12 14:18 ` [PATCHv5 5/5] thermal: rcar_gen3_thermal: Add delay in .thermal_init on r8a7795 Niklas Söderlund
2016-12-13  3:31   ` Eduardo Valentin
2016-12-13  9:15     ` Niklas Söderlund

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20161212141805.14946-2-niklas.soderlund@ragnatech.se \
    --to=niklas.soderlund@ragnatech.se \
    --cc=edubezval@gmail.com \
    --cc=geert@linux-m68k.org \
    --cc=hien.dang.eb@renesas.com \
    --cc=khiem.nguyen.xt@renesas.com \
    --cc=kuninori.morimoto.gx@gmail.com \
    --cc=linux-pm@vger.kernel.org \
    --cc=linux-renesas-soc@vger.kernel.org \
    --cc=niklas.soderlund+renesas@ragnatech.se \
    --cc=rui.zhang@intel.com \
    --cc=wsa+renesas@sang-engineering.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).