linux-pm.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: "Niklas Söderlund" <niklas.soderlund@ragnatech.se>
To: linux-pm@vger.kernel.org,
	Wolfram Sang <wsa+renesas@sang-engineering.com>,
	Khiem Nguyen <khiem.nguyen.xt@renesas.com>,
	Kuninori Morimoto <kuninori.morimoto.gx@gmail.com>
Cc: linux-renesas-soc@vger.kernel.org,
	"Zhang Rui" <rui.zhang@intel.com>,
	"Eduardo Valentin" <edubezval@gmail.com>,
	"Geert Uytterhoeven" <geert@linux-m68k.org>,
	"Hien Dang" <hien.dang.eb@renesas.com>,
	"Thao Nguyen" <thao.nguyen.yb@rvc.renesas.com>,
	"Niklas Söderlund" <niklas.soderlund+renesas@ragnatech.se>
Subject: [PATCHv5 3/5] arm64: dts: r8a7795: Add R-Car Gen3 thermal support
Date: Mon, 12 Dec 2016 15:18:03 +0100	[thread overview]
Message-ID: <20161212141805.14946-4-niklas.soderlund@ragnatech.se> (raw)
In-Reply-To: <20161212141805.14946-1-niklas.soderlund@ragnatech.se>

From: Wolfram Sang <wsa+renesas@sang-engineering.com>

Signed-off-by: Hien Dang <hien.dang.eb@renesas.com>
Signed-off-by: Thao Nguyen <thao.nguyen.yb@rvc.renesas.com>
Signed-off-by: Khiem Nguyen <khiem.nguyen.xt@renesas.com>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
---
 arch/arm64/boot/dts/renesas/r8a7795.dtsi | 58 ++++++++++++++++++++++++++++++++
 1 file changed, 58 insertions(+)

diff --git a/arch/arm64/boot/dts/renesas/r8a7795.dtsi b/arch/arm64/boot/dts/renesas/r8a7795.dtsi
index 8c15040..0699e04 100644
--- a/arch/arm64/boot/dts/renesas/r8a7795.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a7795.dtsi
@@ -1541,5 +1541,63 @@
 				};
 			};
 		};
+
+		tsc: thermal@e6198000 {
+			compatible = "renesas,r8a7795-thermal";
+			reg = <0 0xe6198000 0 0x68>,
+			      <0 0xe61a0000 0 0x5c>,
+			      <0 0xe61a8000 0 0x5c>;
+			interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 522>;
+			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+			#thermal-sensor-cells = <1>;
+			status = "okay";
+		};
+
+		thermal-zones {
+			sensor_thermal1: sensor-thermal1 {
+				polling-delay-passive = <250>;
+				polling-delay = <1000>;
+				thermal-sensors = <&tsc 0>;
+
+				trips {
+					sensor1_crit: sensor1-crit {
+						temperature = <90000>;
+						hysteresis = <2000>;
+						type = "critical";
+					};
+				};
+			};
+
+			sensor_thermal2: sensor-thermal2 {
+				polling-delay-passive = <250>;
+				polling-delay = <1000>;
+				thermal-sensors = <&tsc 1>;
+
+				trips {
+					sensor2_crit: sensor2-crit {
+						temperature = <90000>;
+						hysteresis = <2000>;
+						type = "critical";
+					};
+				};
+			};
+
+			sensor_thermal3: sensor-thermal3 {
+				polling-delay-passive = <250>;
+				polling-delay = <1000>;
+				thermal-sensors = <&tsc 2>;
+
+				trips {
+					sensor3_crit: sensor3-crit {
+						temperature = <90000>;
+						hysteresis = <2000>;
+						type = "critical";
+					};
+				};
+			};
+		};
 	};
 };
-- 
2.10.2

  parent reply	other threads:[~2016-12-12 14:18 UTC|newest]

Thread overview: 19+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-12-12 14:18 [PATCHv5 0/5] thermal: add driver for R-Car Gen3 Niklas Söderlund
2016-12-12 14:18 ` [PATCHv5 1/5] thermal: rcar_gen3_thermal: Document the " Niklas Söderlund
2016-12-12 14:18 ` [PATCHv5 2/5] thermal: rcar_gen3_thermal: Add R-Car Gen3 thermal driver Niklas Söderlund
2016-12-12 21:45   ` Wolfram Sang
2016-12-13  8:25     ` Geert Uytterhoeven
2016-12-13  8:39       ` Wolfram Sang
2016-12-13 10:07         ` Niklas Söderlund
2016-12-13  3:50   ` Eduardo Valentin
2016-12-13  5:38     ` Wolfram Sang
2016-12-13  9:43     ` Niklas Söderlund
2016-12-14  4:38       ` Eduardo Valentin
2016-12-13  8:19   ` Geert Uytterhoeven
2016-12-13  9:53     ` Niklas Söderlund
2016-12-13 10:09       ` Geert Uytterhoeven
2016-12-12 14:18 ` Niklas Söderlund [this message]
2016-12-12 14:18 ` [PATCHv5 4/5] arm64: dts: r8a7796: Add R-Car Gen3 thermal support Niklas Söderlund
2016-12-12 14:18 ` [PATCHv5 5/5] thermal: rcar_gen3_thermal: Add delay in .thermal_init on r8a7795 Niklas Söderlund
2016-12-13  3:31   ` Eduardo Valentin
2016-12-13  9:15     ` Niklas Söderlund

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20161212141805.14946-4-niklas.soderlund@ragnatech.se \
    --to=niklas.soderlund@ragnatech.se \
    --cc=edubezval@gmail.com \
    --cc=geert@linux-m68k.org \
    --cc=hien.dang.eb@renesas.com \
    --cc=khiem.nguyen.xt@renesas.com \
    --cc=kuninori.morimoto.gx@gmail.com \
    --cc=linux-pm@vger.kernel.org \
    --cc=linux-renesas-soc@vger.kernel.org \
    --cc=niklas.soderlund+renesas@ragnatech.se \
    --cc=rui.zhang@intel.com \
    --cc=thao.nguyen.yb@rvc.renesas.com \
    --cc=wsa+renesas@sang-engineering.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).