Re: [RESEND PATCH v4 1/9] mfd: axp20x: correct name of temperature data ADC registers

Lee Jones
2017-03-20T10:43:29Z

On Mon, 20 Mar 2017, Quentin Schulz wrote:

> The registers 0x56 and 0x57 of AXP22X PMIC store the value of the
> internal temperature of the PMIC.
>
> This patch modifies the name of these registers from AXP22X_PMIC_ADC_H/L
> to AXP22X_PMIC_TEMP_H/L so their purpose is clearer.
>
> Signed-off-by: Quentin Schulz <quentin.schulz-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org>
> Acked-by: Chen-Yu Tsai <wens-jdAy2FN1RRM@public.gmane.org>
> Acked-by: Maxime Ripard <maxime.ripard-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org>
> Acked-for-MFD-by: Lee Jones <lee.jones-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
> ---
>
> added in v2
>
> drivers/mfd/axp20x.c | 2 +-
> include/linux/mfd/axp20x.h | 4 ++--
> 2 files changed, 3 insertions(+), 3 deletions(-)

Applied, thanks.

> diff --git a/drivers/mfd/axp20x.c b/drivers/mfd/axp20x.c
> index 0512900..e02edf1 100644
> --- a/drivers/mfd/axp20x.c
> +++ b/drivers/mfd/axp20x.c
> @@ -101,7 +101,7 @@ static const struct regmap_range axp22x_volatile_ranges[] = {
> regmap_reg_range(AXP20X_PWR_INPUT_STATUS, AXP20X_PWR_OP_MODE),
> regmap_reg_range(AXP20X_IRQ1_EN, AXP20X_IRQ5_STATE),
> regmap_reg_range(AXP22X_GPIO_STATE, AXP22X_GPIO_STATE),
> - regmap_reg_range(AXP22X_PMIC_ADC_H, AXP20X_IPSOUT_V_HIGH_L),
> + regmap_reg_range(AXP22X_PMIC_TEMP_H, AXP20X_IPSOUT_V_HIGH_L),
> regmap_reg_range(AXP20X_FG_RES, AXP20X_FG_RES),
> };
>
> diff --git a/include/linux/mfd/axp20x.h b/include/linux/mfd/axp20x.h
> index 0d9a1ff..dc8798c 100644
> --- a/include/linux/mfd/axp20x.h
> +++ b/include/linux/mfd/axp20x.h
> @@ -228,8 +228,8 @@ enum axp20x_variants {
> #define AXP20X_OCV_MAX 0xf
>
> /* AXP22X specific registers */
> -#define AXP22X_PMIC_ADC_H 0x56
> -#define AXP22X_PMIC_ADC_L 0x57
> +#define AXP22X_PMIC_TEMP_H 0x56
> +#define AXP22X_PMIC_TEMP_L 0x57
> #define AXP22X_TS_ADC_H 0x58
> #define AXP22X_TS_ADC_L 0x59
> #define AXP22X_BATLOW_THRES1 0xe6

--
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog

--
You received this message because you are subscribed to the Google Groups "linux-sunxi" group.
To unsubscribe from this group and stop receiving emails from it, send an email to linux-sunxi+unsubscribe-/JYPxA39Uh5TLH3MbocFF+G/Ez6ZCGd0@public.gmane.org
For more options, visit https://groups.google.com/d/optout.