From: Sebastian Reichel <sre@kernel.org>
To: Liam Breck <liam@networkimprov.net>
Cc: Tony Lindgren <tony@atomide.com>,
linux-pm@vger.kernel.org, Hans de Goede <hdegoede@redhat.com>,
Mark Greer <mgreer@animalcreek.com>,
Liam Breck <kernel@networkimprov.net>
Subject: Re: [PATCH v1 6/7] power: bq24190_charger: Add power_supply_battery_info and devicetree support
Date: Fri, 24 Mar 2017 10:20:15 +0100 [thread overview]
Message-ID: <20170324092015.to2yyy5465o4w7lm@earth> (raw)
In-Reply-To: <20170321220921.5834-7-liam@networkimprov.net>
[-- Attachment #1: Type: text/plain, Size: 1897 bytes --]
Hi,
On Tue, Mar 21, 2017 at 03:09:20PM -0700, Liam Breck wrote:
> From: Liam Breck <kernel@networkimprov.net>
>
> Obtain pre-charge and end-charge current values from power_supply_battery_info.
> Obtain minimum system voltage level from devicetree.
>
> Cc: Mark Greer <mgreer@animalcreek.com>
> Signed-off-by: Liam Breck <kernel@networkimprov.net>
>
> [...]
>
> @@ -1314,6 +1358,39 @@ static int bq24190_hw_init(struct bq24190_dev_info *bdi)
> #ifdef CONFIG_OF
> static int bq24190_setup_dt(struct bq24190_dev_info *bdi)
> {
> + struct power_supply_battery_info info = {};
> + const char const* s = "ti,system-minimum-microvolt";
> + int v;
> +
> + if (!of_property_read_u32(bdi->dev->of_node, s, &v)) {
> + v /= 1000;
> + if (v >= BQ24190_REG_POC_SYS_MIN_MIN
> + && v <= BQ24190_REG_POC_SYS_MIN_MAX)
> + bdi->sys_min = v;
> + else
> + dev_err(bdi->dev, "invalid value for %s: %u\n", s, v);
> + }
Let's use device_property_read_u32 here. With that change
there is nothing DT specific, so the function can be named
bq24190_setup (or everything is done directly in probe, that's
also fine with me).
> + if (!power_supply_get_battery_info(bdi->battery, &info)) {
> + v = info.precharge_current_ua / 1000;
> + if (v >= BQ24190_REG_PCTCC_IPRECHG_MIN
> + && v <= BQ24190_REG_PCTCC_IPRECHG_MAX)
> + bdi->iprechg = v;
> + else
> + dev_err(bdi->dev,
> + "invalid value for battery:precharge-current-microamp: %d\n",
> + v);
> +
> + v = info.endcharge_current_ua / 1000;
> + if (v >= BQ24190_REG_PCTCC_ITERM_MIN
> + && v <= BQ24190_REG_PCTCC_ITERM_MAX)
> + bdi->iterm = v;
> + else
> + dev_err(bdi->dev,
> + "invalid value for battery:endcharge-current-microamp: %d\n",
> + v);
> + }
> +
> bdi->irq = irq_of_parse_and_map(bdi->dev->of_node, 0);
> if (bdi->irq <= 0)
> return -1;
-- Sebastian
[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 833 bytes --]
next prev parent reply other threads:[~2017-03-24 9:20 UTC|newest]
Thread overview: 46+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-03-21 22:09 [PATCH v1 0/7] BQ24190 support for power_supply_battery_info and DT binding Liam Breck
2017-03-21 22:09 ` [PATCH v1 1/7] devicetree: power: battery: Add properties for pre-charge and end-charge current Liam Breck
[not found] ` <20170321220921.5834-2-liam-RYWXG+zxWwBdeoIcmNTgJF6hYfS7NtTn@public.gmane.org>
2017-03-22 12:04 ` Hans de Goede
2017-03-29 0:39 ` Rob Herring
2017-03-29 1:42 ` Liam Breck
2017-03-24 9:01 ` Sebastian Reichel
2017-03-25 0:34 ` Liam Breck
2017-03-29 0:43 ` Rob Herring
2017-03-21 22:09 ` [PATCH v1 2/7] devicetree: power: Add docs for TI BQ24190 battery charger Liam Breck
2017-03-24 9:00 ` Sebastian Reichel
[not found] ` <20170321220921.5834-3-liam-RYWXG+zxWwBdeoIcmNTgJF6hYfS7NtTn@public.gmane.org>
2017-03-22 12:04 ` Hans de Goede
2017-03-29 0:47 ` Rob Herring
2017-03-29 1:48 ` Liam Breck
2017-03-21 22:09 ` [PATCH v1 3/7] power: power_supply_core: Add *_battery_info fields for pre- and end-charge current Liam Breck
2017-03-22 12:12 ` Hans de Goede
2017-03-24 9:07 ` Sebastian Reichel
2017-03-21 22:09 ` [PATCH v1 4/7] power: bq24190_charger: Uniform pm_runtime_get() failure handling Liam Breck
2017-03-22 12:14 ` Hans de Goede
2017-03-22 15:35 ` Tony Lindgren
2017-03-24 9:13 ` Sebastian Reichel
2017-03-21 22:09 ` [PATCH v1 5/7] power: bq24190_charger: Reorder init sequence in probe() Liam Breck
2017-03-22 12:14 ` Hans de Goede
2017-03-22 15:36 ` Tony Lindgren
2017-03-21 22:09 ` [PATCH v1 6/7] power: bq24190_charger: Add power_supply_battery_info and devicetree support Liam Breck
2017-03-22 12:15 ` Hans de Goede
2017-03-24 9:20 ` Sebastian Reichel [this message]
2017-03-21 22:09 ` [PATCH v1 7/7] power: bq24190_charger: Set bq24190-battery device .type=unknown Liam Breck
2017-03-22 12:25 ` Hans de Goede
2017-03-22 13:15 ` Hans de Goede
2017-03-22 13:37 ` Liam Breck
2017-03-22 14:41 ` Hans de Goede
2017-03-22 18:33 ` Liam Breck
2017-03-23 8:18 ` Hans de Goede
2017-03-23 8:55 ` Liam Breck
2017-03-22 13:22 ` Liam Breck
2017-03-23 10:52 ` Sebastian Reichel
2017-03-23 11:31 ` Liam Breck
2017-03-23 13:37 ` Sebastian Reichel
2017-03-23 19:05 ` Liam Breck
2017-03-23 20:47 ` Liam Breck
2017-03-24 9:39 ` Sebastian Reichel
2017-03-24 10:44 ` Liam Breck
2017-03-24 11:22 ` Sebastian Reichel
2017-03-24 11:56 ` Liam Breck
2017-03-29 14:12 ` Sebastian Reichel
2017-04-14 22:43 ` Liam Breck
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20170324092015.to2yyy5465o4w7lm@earth \
--to=sre@kernel.org \
--cc=hdegoede@redhat.com \
--cc=kernel@networkimprov.net \
--cc=liam@networkimprov.net \
--cc=linux-pm@vger.kernel.org \
--cc=mgreer@animalcreek.com \
--cc=tony@atomide.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox