From mboxrd@z Thu Jan 1 00:00:00 1970 From: Lee Jones Subject: Re: [PATCH v3 1/3] mfd: intel_soc_pmic: Fix a mess with compilation units Date: Mon, 3 Apr 2017 15:34:30 +0100 Message-ID: <20170403143430.4efwx7muuveun72f@dell> References: <20170317153715.48555-1-andriy.shevchenko@linux.intel.com> Mime-Version: 1.0 Content-Type: text/plain; charset=utf-8 Content-Transfer-Encoding: 8bit Return-path: Content-Disposition: inline In-Reply-To: <20170317153715.48555-1-andriy.shevchenko@linux.intel.com> Sender: linux-gpio-owner@vger.kernel.org To: Andy Shevchenko Cc: linux-kernel@vger.kernel.org, linux-acpi@vger.kernel.org, linux-gpio@vger.kernel.org, linux-pm@vger.kernel.org, platform-driver-x86@vger.kernel.org, "Rafael J. Wysocki" , Linus Walleij , Zhang Rui , Eduardo Valentin List-Id: linux-pm@vger.kernel.org On Fri, 17 Mar 2017, Andy Shevchenko wrote: > Crystal Cove and Whiskey Cove are two different PMICs which are > installed on Intel Atom SoC based platforms. > > Moreover there are two independent drivers that by some reason were > supposed (*) to get into one kernel module. > > Fix the mess by clarifying Kconfig option for Crystal Cove and split > Whiskey Cove out of it. > > (*) It looks like the configuration was never tested with > INTEL_SOC_PMIC=n. The line in Makefile is actually wrong. > > Cc: "Rafael J. Wysocki" (supporter:ACPI) > Cc: Linus Walleij (maintainer:GPIO SUBSYSTEM) > Cc: Zhang Rui (supporter:THERMAL) > Cc: Eduardo Valentin (supporter:THERMAL) > Signed-off-by: Andy Shevchenko > --- > - make option visible > - fix dependencies > drivers/acpi/Kconfig | 2 +- > drivers/gpio/Kconfig | 2 +- > drivers/mfd/Kconfig | 14 ++++++++++++-- > drivers/mfd/Makefile | 2 +- > drivers/platform/x86/Kconfig | 2 +- > drivers/thermal/Kconfig | 2 +- > 6 files changed, 17 insertions(+), 7 deletions(-) Applied, thanks. > diff --git a/drivers/acpi/Kconfig b/drivers/acpi/Kconfig > index 83e5f7e1a20d..03708e08fcb4 100644 > --- a/drivers/acpi/Kconfig > +++ b/drivers/acpi/Kconfig > @@ -512,7 +512,7 @@ config XPOWER_PMIC_OPREGION > > config BXT_WC_PMIC_OPREGION > bool "ACPI operation region support for BXT WhiskeyCove PMIC" > - depends on INTEL_SOC_PMIC > + depends on INTEL_SOC_PMIC_BXTWC > help > This config adds ACPI operation region support for BXT WhiskeyCove PMIC. > > diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig > index 05043071fc98..9b1bcb4d0df7 100644 > --- a/drivers/gpio/Kconfig > +++ b/drivers/gpio/Kconfig > @@ -1054,7 +1054,7 @@ config GPIO_UCB1400 > > config GPIO_WHISKEY_COVE > tristate "GPIO support for Whiskey Cove PMIC" > - depends on (X86 || COMPILE_TEST) && INTEL_SOC_PMIC > + depends on (X86 || COMPILE_TEST) && INTEL_SOC_PMIC_BXTWC > select GPIOLIB_IRQCHIP > help > Support for GPIO pins on Whiskey Cove PMIC. > diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig > index 55ecdfb74d31..e43afb8956ea 100644 > --- a/drivers/mfd/Kconfig > +++ b/drivers/mfd/Kconfig > @@ -425,18 +425,28 @@ config LPC_SCH > System Management Bus and General Purpose I/O. > > config INTEL_SOC_PMIC > - bool "Support for Intel Atom SoC PMIC" > + bool "Support for Crystal Cove PMIC" > depends on GPIOLIB > depends on I2C=y > select MFD_CORE > select REGMAP_I2C > select REGMAP_IRQ > help > - Select this option to enable support for the PMIC device > + Select this option to enable support for Crystal Cove PMIC > on some Intel SoC systems. The PMIC provides ADC, GPIO, > thermal, charger and related power management functions > on these systems. > > +config INTEL_SOC_PMIC_BXTWC > + tristate "Support for Intel Broxton Whiskey Cove PMIC" > + select MFD_CORE > + select REGMAP_IRQ > + help > + Select this option to enable support for Whiskey Cove PMIC > + on Intel Broxton systems. The PMIC provides ADC, GPIO, > + thermal, charger and related power management functions > + on these systems. > + > config MFD_INTEL_LPSS > tristate > select COMMON_CLK > diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile > index 31ce07611a6f..201aeaf5112a 100644 > --- a/drivers/mfd/Makefile > +++ b/drivers/mfd/Makefile > @@ -207,8 +207,8 @@ obj-$(CONFIG_MFD_RT5033) += rt5033.o > obj-$(CONFIG_MFD_SKY81452) += sky81452.o > > intel-soc-pmic-objs := intel_soc_pmic_core.o intel_soc_pmic_crc.o > -intel-soc-pmic-$(CONFIG_INTEL_PMC_IPC) += intel_soc_pmic_bxtwc.o > obj-$(CONFIG_INTEL_SOC_PMIC) += intel-soc-pmic.o > +obj-$(CONFIG_INTEL_SOC_PMIC_BXTWC) += intel_soc_pmic_bxtwc.o > obj-$(CONFIG_MFD_MT6397) += mt6397-core.o > > obj-$(CONFIG_MFD_ALTERA_A10SR) += altera-a10sr.o > diff --git a/drivers/platform/x86/Kconfig b/drivers/platform/x86/Kconfig > index e1bffc9bb194..883fbe7a2466 100644 > --- a/drivers/platform/x86/Kconfig > +++ b/drivers/platform/x86/Kconfig > @@ -1019,7 +1019,7 @@ config INTEL_PMC_IPC > config INTEL_BXTWC_PMIC_TMU > tristate "Intel BXT Whiskey Cove TMU Driver" > depends on REGMAP > - depends on INTEL_SOC_PMIC && INTEL_PMC_IPC > + depends on INTEL_SOC_PMIC_BXTWC && INTEL_PMC_IPC > ---help--- > Select this driver to use Intel BXT Whiskey Cove PMIC TMU feature. > This driver enables the alarm wakeup functionality in the TMU unit > diff --git a/drivers/thermal/Kconfig b/drivers/thermal/Kconfig > index 776b34396144..751e50a3d946 100644 > --- a/drivers/thermal/Kconfig > +++ b/drivers/thermal/Kconfig > @@ -365,7 +365,7 @@ endmenu > > config INTEL_BXT_PMIC_THERMAL > tristate "Intel Broxton PMIC thermal driver" > - depends on X86 && INTEL_SOC_PMIC && REGMAP > + depends on X86 && INTEL_SOC_PMIC_BXTWC && REGMAP > help > Select this driver for Intel Broxton PMIC with ADC channels monitoring > system temperature measurements and alerts. -- Lee Jones Linaro STMicroelectronics Landing Team Lead Linaro.org │ Open source software for ARM SoCs Follow Linaro: Facebook | Twitter | Blog