* Re: [PATCH] bus: SIMPLE_PM_BUS does not depend on ARCH_RENESAS
[not found] <20170613130430.4272-1-robdclark@gmail.com>
@ 2017-06-13 16:39 ` Bjorn Andersson
2017-06-16 20:01 ` Simon Horman
0 siblings, 1 reply; 2+ messages in thread
From: Bjorn Andersson @ 2017-06-13 16:39 UTC (permalink / raw)
To: Rob Clark
Cc: linux-arm-kernel, linux-arm-msm, linux-soc, Andy Gross,
Stephen Boyd, Geert Uytterhoeven, Linux PM list, Simon Horman
+cc Geert, Simon, linux-pm
On Tue 13 Jun 06:04 PDT 2017, Rob Clark wrote:
> In fact, it is needed for PCI to work on msm8996 (and probably other
> things). No idea why it was depending on renesas but that doesn't make
> any sense. So drop the dependency.
>
This is in line with Geert's previous comments on how to utilize
simple-pm-bus to describe this hardware.
Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Regards,
Bjorn
> Signed-off-by: Rob Clark <robdclark@gmail.com>
> ---
> drivers/bus/Kconfig | 1 -
> 1 file changed, 1 deletion(-)
>
> diff --git a/drivers/bus/Kconfig b/drivers/bus/Kconfig
> index 0a52da4..b83c535 100644
> --- a/drivers/bus/Kconfig
> +++ b/drivers/bus/Kconfig
> @@ -121,7 +121,6 @@ config QCOM_EBI2
> config SIMPLE_PM_BUS
> bool "Simple Power-Managed Bus Driver"
> depends on OF && PM
> - depends on ARCH_RENESAS || COMPILE_TEST
> help
> Driver for transparent busses that don't need a real driver, but
> where the bus controller is part of a PM domain, or under the control
> --
> 2.9.4
>
^ permalink raw reply [flat|nested] 2+ messages in thread
* Re: [PATCH] bus: SIMPLE_PM_BUS does not depend on ARCH_RENESAS
2017-06-13 16:39 ` [PATCH] bus: SIMPLE_PM_BUS does not depend on ARCH_RENESAS Bjorn Andersson
@ 2017-06-16 20:01 ` Simon Horman
0 siblings, 0 replies; 2+ messages in thread
From: Simon Horman @ 2017-06-16 20:01 UTC (permalink / raw)
To: Bjorn Andersson
Cc: Rob Clark, linux-arm-kernel, linux-arm-msm, linux-soc, Andy Gross,
Stephen Boyd, Geert Uytterhoeven, Linux PM list
On Tue, Jun 13, 2017 at 09:39:59AM -0700, Bjorn Andersson wrote:
> +cc Geert, Simon, linux-pm
>
> On Tue 13 Jun 06:04 PDT 2017, Rob Clark wrote:
>
> > In fact, it is needed for PCI to work on msm8996 (and probably other
> > things). No idea why it was depending on renesas but that doesn't make
> > any sense. So drop the dependency.
> >
>
> This is in line with Geert's previous comments on how to utilize
> simple-pm-bus to describe this hardware.
>
> Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org>
No objection here,
Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
>
> Regards,
> Bjorn
>
> > Signed-off-by: Rob Clark <robdclark@gmail.com>
> > ---
> > drivers/bus/Kconfig | 1 -
> > 1 file changed, 1 deletion(-)
> >
> > diff --git a/drivers/bus/Kconfig b/drivers/bus/Kconfig
> > index 0a52da4..b83c535 100644
> > --- a/drivers/bus/Kconfig
> > +++ b/drivers/bus/Kconfig
> > @@ -121,7 +121,6 @@ config QCOM_EBI2
> > config SIMPLE_PM_BUS
> > bool "Simple Power-Managed Bus Driver"
> > depends on OF && PM
> > - depends on ARCH_RENESAS || COMPILE_TEST
> > help
> > Driver for transparent busses that don't need a real driver, but
> > where the bus controller is part of a PM domain, or under the control
> > --
> > 2.9.4
> >
>
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2017-06-16 20:02 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
[not found] <20170613130430.4272-1-robdclark@gmail.com>
2017-06-13 16:39 ` [PATCH] bus: SIMPLE_PM_BUS does not depend on ARCH_RENESAS Bjorn Andersson
2017-06-16 20:01 ` Simon Horman
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).