Re: [PATCH v2 1/2] power: supply: move HDQ interface for bq27xxx from w1 to power/supply

[Sebastian Reichel <sebastian.reichel@collabora.co.uk>]

[-- Attachment #1: Type: text/plain, Size: 5795 bytes --]

Hi Greg & Evgeniy,

Here is a signed immutable branch for Andrew's patch, which moves
bq27000 w1 driver to the power-supply subsystem. I guess git will
figure everything out without this, but better safe than sorry :)

The following changes since commit 520eccdfe187591a51ea9ab4c1a024ae4d0f68d9:

  Linux 4.13-rc2 (2017-07-23 16:15:17 -0700)

are available in the git repository at:

  git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply.git tags/ib-w1-bq27000-4.14

for you to fetch changes up to 55a9db679183bcf85a6e5c44a4f92f158bb6f03d:

  power: supply: move HDQ interface for bq27xxx from w1 to power/supply (2017-07-25 15:17:39 +0200)

----------------------------------------------------------------
immutable branch moving bq2700 driver from w1 to power-supply

----------------------------------------------------------------
Andrew F. Davis (1):
      power: supply: move HDQ interface for bq27xxx from w1 to power/supply

 drivers/power/supply/Kconfig                                     | 9 +++++++++
 drivers/power/supply/Makefile                                    | 1 +
 .../slaves/w1_bq27000.c => power/supply/bq27xxx_battery_hdq.c}   | 2 --
 drivers/w1/slaves/Kconfig                                        | 6 ------
 drivers/w1/slaves/Makefile                                       | 1 -
 5 files changed, 10 insertions(+), 9 deletions(-)
 rename drivers/{w1/slaves/w1_bq27000.c => power/supply/bq27xxx_battery_hdq.c} (98%)

-- Sebastian

On Tue, Jul 25, 2017 at 03:30:22PM +0200, Sebastian Reichel wrote:
> Hi,
> 
> On Wed, Jul 19, 2017 at 12:04:06PM -0500, Andrew F. Davis wrote:
> > The HDQ interface driver should be in this folder just like the I2C
> > interface driver. Move this driver out of drivers/w1/slave and into
> > drivers/power/supply.
> > 
> > Signed-off-by: Andrew F. Davis <afd@ti.com>
> > Acked-by: Pali Rohár <pali.rohar@gmail.com>
> > Acked-by: Sebastian Reichel <sre@kernel.org>
> 
> Thanks, queued to power-supply's for-next branch. I prepared a
> immutable branch/tag for the w1 tree and will send a pull request
> for that in a minute.
> 
> -- Sebastian
> 
> >  drivers/power/supply/Kconfig                                     | 9 +++++++++
> >  drivers/power/supply/Makefile                                    | 1 +
> >  .../slaves/w1_bq27000.c => power/supply/bq27xxx_battery_hdq.c}   | 2 --
> >  drivers/w1/slaves/Kconfig                                        | 6 ------
> >  drivers/w1/slaves/Makefile                                       | 1 -
> >  5 files changed, 10 insertions(+), 9 deletions(-)
> >  rename drivers/{w1/slaves/w1_bq27000.c => power/supply/bq27xxx_battery_hdq.c} (98%)
> > 
> > diff --git a/drivers/power/supply/Kconfig b/drivers/power/supply/Kconfig
> > index 969f5005669c..af6397224a82 100644
> > --- a/drivers/power/supply/Kconfig
> > +++ b/drivers/power/supply/Kconfig
> > @@ -198,6 +198,15 @@ config BATTERY_BQ27XXX_I2C
> >  	  Say Y here to enable support for batteries with BQ27xxx chips
> >  	  connected over an I2C bus.
> >  
> > +config BATTERY_BQ27XXX_HDQ
> > +	tristate "BQ27xxx HDQ support"
> > +	depends on BATTERY_BQ27XXX
> > +	depends on W1
> > +	default y
> > +	help
> > +	  Say Y here to enable support for batteries with BQ27xxx chips
> > +	  connected over an HDQ bus.
> > +
> >  config BATTERY_BQ27XXX_DT_UPDATES_NVM
> >  	bool "BQ27xxx support for update of NVM/flash data memory"
> >  	depends on BATTERY_BQ27XXX_I2C
> > diff --git a/drivers/power/supply/Makefile b/drivers/power/supply/Makefile
> > index a41f40957847..946a5e6be860 100644
> > --- a/drivers/power/supply/Makefile
> > +++ b/drivers/power/supply/Makefile
> > @@ -38,6 +38,7 @@ obj-$(CONFIG_BATTERY_SBS)	+= sbs-battery.o
> >  obj-$(CONFIG_CHARGER_SBS)	+= sbs-charger.o
> >  obj-$(CONFIG_BATTERY_BQ27XXX)	+= bq27xxx_battery.o
> >  obj-$(CONFIG_BATTERY_BQ27XXX_I2C) += bq27xxx_battery_i2c.o
> > +obj-$(CONFIG_BATTERY_BQ27XXX_HDQ) += bq27xxx_battery_hdq.o
> >  obj-$(CONFIG_BATTERY_DA9030)	+= da9030_battery.o
> >  obj-$(CONFIG_BATTERY_DA9052)	+= da9052-battery.o
> >  obj-$(CONFIG_CHARGER_DA9150)	+= da9150-charger.o
> > diff --git a/drivers/w1/slaves/w1_bq27000.c b/drivers/power/supply/bq27xxx_battery_hdq.c
> > similarity index 98%
> > rename from drivers/w1/slaves/w1_bq27000.c
> > rename to drivers/power/supply/bq27xxx_battery_hdq.c
> > index 8046ac45381a..f4df67eb9d2c 100644
> > --- a/drivers/w1/slaves/w1_bq27000.c
> > +++ b/drivers/power/supply/bq27xxx_battery_hdq.c
> > @@ -1,6 +1,4 @@
> >  /*
> > - * drivers/w1/slaves/w1_bq27000.c
> > - *
> >   * Copyright (C) 2007 Texas Instruments, Inc.
> >   *
> >   * This file is licensed under the terms of the GNU General Public License
> > diff --git a/drivers/w1/slaves/Kconfig b/drivers/w1/slaves/Kconfig
> > index fb68465908f2..dc4437683956 100644
> > --- a/drivers/w1/slaves/Kconfig
> > +++ b/drivers/w1/slaves/Kconfig
> > @@ -140,10 +140,4 @@ config W1_SLAVE_DS28E04
> >  
> >  	  If you are unsure, say N.
> >  
> > -config W1_SLAVE_BQ27000
> > -	tristate "BQ27000 slave support"
> > -	help
> > -	  Say Y here if you want to use a hdq
> > -	  bq27000 slave support.
> > -
> >  endmenu
> > diff --git a/drivers/w1/slaves/Makefile b/drivers/w1/slaves/Makefile
> > index 54c63e420302..e59441a5e157 100644
> > --- a/drivers/w1/slaves/Makefile
> > +++ b/drivers/w1/slaves/Makefile
> > @@ -15,5 +15,4 @@ obj-$(CONFIG_W1_SLAVE_DS2438)	+= w1_ds2438.o
> >  obj-$(CONFIG_W1_SLAVE_DS2760)	+= w1_ds2760.o
> >  obj-$(CONFIG_W1_SLAVE_DS2780)	+= w1_ds2780.o
> >  obj-$(CONFIG_W1_SLAVE_DS2781)	+= w1_ds2781.o
> > -obj-$(CONFIG_W1_SLAVE_BQ27000)	+= w1_bq27000.o
> >  obj-$(CONFIG_W1_SLAVE_DS28E04)	+= w1_ds28e04.o
> > -- 
> > 2.13.0
> > 



[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 833 bytes --]