From: Hans de Goede <hdegoede@redhat.com>
To: Wolfram Sang <wsa@the-dreams.de>,
Guenter Roeck <linux@roeck-us.net>,
Heikki Krogerus <heikki.krogerus@linux.intel.com>,
Sebastian Reichel <sre@kernel.org>,
Darren Hart <dvhart@infradead.org>,
Andy Shevchenko <andy@infradead.org>,
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Hans de Goede <hdegoede@redhat.com>,
Liam Breck <liam@networkimprov.net>,
Tony Lindgren <tony@atomide.com>,
linux-i2c@vger.kernel.org, linux-pm@vger.kernel.org,
platform-driver-x86@vger.kernel.org,
linux-kernel@vger.kernel.org, devel@driverdev.osuosl.org
Subject: [PATCH v2 10/14] power: supply: bq24190_charger: Add input_current_limit property
Date: Tue, 15 Aug 2017 22:04:58 +0200 [thread overview]
Message-ID: <20170815200502.17339-11-hdegoede@redhat.com> (raw)
In-Reply-To: <20170815200502.17339-1-hdegoede@redhat.com>
Export the input current limit of the charger as a
POWER_SUPPLY_PROP_INPUT_CURRENT_LIMIT property on the charger
power_supply class device.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
---
drivers/power/supply/bq24190_charger.c | 35 ++++++++++++++++++++++++++++++++++
1 file changed, 35 insertions(+)
diff --git a/drivers/power/supply/bq24190_charger.c b/drivers/power/supply/bq24190_charger.c
index 073cd9d..f13f892 100644
--- a/drivers/power/supply/bq24190_charger.c
+++ b/drivers/power/supply/bq24190_charger.c
@@ -987,6 +987,33 @@ static int bq24190_charger_set_voltage(struct bq24190_dev_info *bdi,
ARRAY_SIZE(bq24190_cvc_vreg_values), val->intval);
}
+static int bq24190_charger_get_iinlimit(struct bq24190_dev_info *bdi,
+ union power_supply_propval *val)
+{
+ int iinlimit, ret;
+
+ ret = bq24190_get_field_val(bdi, BQ24190_REG_ISC,
+ BQ24190_REG_ISC_IINLIM_MASK,
+ BQ24190_REG_ISC_IINLIM_SHIFT,
+ bq24190_isc_iinlim_values,
+ ARRAY_SIZE(bq24190_isc_iinlim_values), &iinlimit);
+ if (ret < 0)
+ return ret;
+
+ val->intval = iinlimit;
+ return 0;
+}
+
+static int bq24190_charger_set_iinlimit(struct bq24190_dev_info *bdi,
+ const union power_supply_propval *val)
+{
+ return bq24190_set_field_val(bdi, BQ24190_REG_ISC,
+ BQ24190_REG_ISC_IINLIM_MASK,
+ BQ24190_REG_ISC_IINLIM_SHIFT,
+ bq24190_isc_iinlim_values,
+ ARRAY_SIZE(bq24190_isc_iinlim_values), val->intval);
+}
+
static int bq24190_charger_get_property(struct power_supply *psy,
enum power_supply_property psp, union power_supply_propval *val)
{
@@ -1027,6 +1054,9 @@ static int bq24190_charger_get_property(struct power_supply *psy,
case POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE_MAX:
ret = bq24190_charger_get_voltage_max(bdi, val);
break;
+ case POWER_SUPPLY_PROP_INPUT_CURRENT_LIMIT:
+ ret = bq24190_charger_get_iinlimit(bdi, val);
+ break;
case POWER_SUPPLY_PROP_SCOPE:
val->intval = POWER_SUPPLY_SCOPE_SYSTEM;
ret = 0;
@@ -1078,6 +1108,9 @@ static int bq24190_charger_set_property(struct power_supply *psy,
case POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE:
ret = bq24190_charger_set_voltage(bdi, val);
break;
+ case POWER_SUPPLY_PROP_INPUT_CURRENT_LIMIT:
+ ret = bq24190_charger_set_iinlimit(bdi, val);
+ break;
default:
ret = -EINVAL;
}
@@ -1099,6 +1132,7 @@ static int bq24190_charger_property_is_writeable(struct power_supply *psy,
case POWER_SUPPLY_PROP_CHARGE_TYPE:
case POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT:
case POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE:
+ case POWER_SUPPLY_PROP_INPUT_CURRENT_LIMIT:
ret = 1;
break;
default:
@@ -1118,6 +1152,7 @@ static enum power_supply_property bq24190_charger_properties[] = {
POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT_MAX,
POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE,
POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE_MAX,
+ POWER_SUPPLY_PROP_INPUT_CURRENT_LIMIT,
POWER_SUPPLY_PROP_SCOPE,
POWER_SUPPLY_PROP_MODEL_NAME,
POWER_SUPPLY_PROP_MANUFACTURER,
--
2.9.4
next prev parent reply other threads:[~2017-08-15 20:04 UTC|newest]
Thread overview: 32+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-08-15 20:04 [PATCH v2 00/14] Hookup typec power-negotation to the PMIC and charger Hans de Goede
2017-08-15 20:04 ` [PATCH v2 01/14] i2c: Allow overriding dev_name through board_info Hans de Goede
2017-08-15 20:04 ` [PATCH v2 02/14] staging: typec: tcpm: Add get_current_limit tcpc_dev callback Hans de Goede
2017-08-16 15:11 ` Guenter Roeck
2017-08-15 20:04 ` [PATCH v2 03/14] staging: typec: fusb302: Set max supply voltage to 5V Hans de Goede
2017-08-15 20:04 ` [PATCH v2 04/14] staging: typec: fusb302: Get max snk mv/ma/mw from device-properties Hans de Goede
[not found] ` <20170815200502.17339-5-hdegoede-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>
2017-08-17 21:41 ` Rob Herring
2017-08-28 16:11 ` Hans de Goede
2017-08-15 20:04 ` [PATCH v2 05/14] staging: typec: fusb302: Use client->irq as irq if set Hans de Goede
2017-08-15 20:04 ` [PATCH v2 06/14] staging: typec: fusb302: Add support for USB2 charger detection through extcon Hans de Goede
2017-08-15 20:04 ` [PATCH v2 07/14] staging: typec: fusb302: Export current-limit through a power_supply class dev Hans de Goede
2017-08-15 20:04 ` [PATCH v2 08/14] power: supply: Add power_supply_set_input_current_limit_from_supplier helper Hans de Goede
2017-08-16 15:54 ` Tony Lindgren
2017-08-16 17:38 ` Hans de Goede
2017-08-16 19:21 ` Tony Lindgren
2017-08-29 10:54 ` Sebastian Reichel
2017-08-15 20:04 ` [PATCH v2 09/14] power: supply: bq24190_charger: Export 5V boost converter as regulator Hans de Goede
2017-08-29 11:28 ` Sebastian Reichel
2017-08-15 20:04 ` Hans de Goede [this message]
2017-08-29 11:29 ` [PATCH v2 10/14] power: supply: bq24190_charger: Add input_current_limit property Sebastian Reichel
2017-08-15 20:04 ` [PATCH v2 11/14] power: supply: bq24190_charger: Get input_current_limit from our supplier Hans de Goede
2017-08-16 20:28 ` Liam Breck
2017-08-28 16:04 ` Hans de Goede
2017-08-28 17:02 ` Liam Breck
2017-08-28 18:07 ` Liam Breck
2017-08-28 19:08 ` Hans de Goede
2017-08-29 11:40 ` Sebastian Reichel
2017-08-29 11:53 ` Hans de Goede
2017-08-29 12:12 ` Sebastian Reichel
2017-08-15 20:05 ` [PATCH v2 12/14] power: supply: bq24190_charger: Remove extcon handling Hans de Goede
2017-08-15 20:05 ` [PATCH v2 13/14] i2c-cht-wc: Add device-properties for fusb302 integration Hans de Goede
2017-08-15 20:05 ` [PATCH v2 14/14] platform/x86: intel_cht_int33fe: Update fusb302 type string, add properties Hans de Goede
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20170815200502.17339-11-hdegoede@redhat.com \
--to=hdegoede@redhat.com \
--cc=andy@infradead.org \
--cc=devel@driverdev.osuosl.org \
--cc=dvhart@infradead.org \
--cc=gregkh@linuxfoundation.org \
--cc=heikki.krogerus@linux.intel.com \
--cc=liam@networkimprov.net \
--cc=linux-i2c@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pm@vger.kernel.org \
--cc=linux@roeck-us.net \
--cc=platform-driver-x86@vger.kernel.org \
--cc=sre@kernel.org \
--cc=tony@atomide.com \
--cc=wsa@the-dreams.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).