Re: [PATCH 19/25] thermal/drivers/hisi: Put platform code together

[Eduardo Valentin <edubezval@gmail.com>]

On Tue, Oct 10, 2017 at 08:02:44PM +0200, Daniel Lezcano wrote:
> From: Kevin Wangtao <kevin.wangtao@linaro.org>
> 
> Reorganize the code for next patches by moving the functions upper in
> the file which will prevent a forward declaration. There is no functional
> change here.
> 


CHECK: Please don't use multiple blank lines
#104: FILE: drivers/thermal/hisi_thermal.c:204:
 
 +

 total: 0 errors, 0 warnings, 1 checks, 88 lines checked


> Signed-off-by: Kevin Wangtao <kevin.wangtao@linaro.org>
> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
> ---
>  drivers/thermal/hisi_thermal.c | 76 +++++++++++++++++++++---------------------
>  1 file changed, 38 insertions(+), 38 deletions(-)
> 
> diff --git a/drivers/thermal/hisi_thermal.c b/drivers/thermal/hisi_thermal.c
> index befdb28..ff9055a 100644
> --- a/drivers/thermal/hisi_thermal.c
> +++ b/drivers/thermal/hisi_thermal.c
> @@ -201,6 +201,44 @@ static void hisi_thermal_disable_sensor(struct hisi_thermal_data *data)
>  	clk_disable_unprepare(data->clk);
>  }
>  
> +
> +static int hisi_thermal_setup(struct hisi_thermal_data *data)
> +{
> +	struct hisi_thermal_sensor *sensor = &data->sensor;
> +	int ret;
> +
> +	/* enable clock for tsensor */
> +	ret = clk_prepare_enable(data->clk);
> +	if (ret)
> +		return ret;
> +
> +	/* disable module firstly */
> +	hisi_thermal_reset_enable(data->regs, 0);
> +	hisi_thermal_enable(data->regs, 0);
> +
> +	/* select sensor id */
> +	hisi_thermal_sensor_select(data->regs, sensor->id);
> +
> +	/* setting the hdak time */
> +	hisi_thermal_hdak_set(data->regs, 0);
> +
> +	/* setting lag value between current temp and the threshold */
> +	hisi_thermal_set_lag(data->regs, HISI_TEMP_LAG);
> +
> +	/* enable for interrupt */
> +	hisi_thermal_alarm_set(data->regs, sensor->thres_temp);
> +
> +	hisi_thermal_reset_set(data->regs, HISI_TEMP_RESET);
> +
> +	/* enable module */
> +	hisi_thermal_reset_enable(data->regs, 1);
> +	hisi_thermal_enable(data->regs, 1);
> +
> +	hisi_thermal_alarm_clear(data->regs, 0);
> +	hisi_thermal_alarm_enable(data->regs, 1);
> +
> +	return 0;
> +}
>  static int hisi_thermal_get_temp(void *__data, int *temp)
>  {
>  	struct hisi_thermal_data *data = __data;
> @@ -291,44 +329,6 @@ static void hisi_thermal_toggle_sensor(struct hisi_thermal_sensor *sensor,
>  		on ? THERMAL_DEVICE_ENABLED : THERMAL_DEVICE_DISABLED);
>  }
>  
> -static int hisi_thermal_setup(struct hisi_thermal_data *data)
> -{
> -	struct hisi_thermal_sensor *sensor = &data->sensor;
> -	int ret;
> -
> -	/* enable clock for tsensor */
> -	ret = clk_prepare_enable(data->clk);
> -	if (ret)
> -		return ret;
> -
> -	/* disable module firstly */
> -	hisi_thermal_reset_enable(data->regs, 0);
> -	hisi_thermal_enable(data->regs, 0);
> -
> -	/* select sensor id */
> -	hisi_thermal_sensor_select(data->regs, sensor->id);
> -
> -	/* setting the hdak time */
> -	hisi_thermal_hdak_set(data->regs, 0);
> -
> -	/* setting lag value between current temp and the threshold */
> -	hisi_thermal_set_lag(data->regs, HISI_TEMP_LAG);
> -
> -	/* enable for interrupt */
> -	hisi_thermal_alarm_set(data->regs, sensor->thres_temp);
> -
> -	hisi_thermal_reset_set(data->regs, HISI_TEMP_RESET);
> -
> -	/* enable module */
> -	hisi_thermal_reset_enable(data->regs, 1);
> -	hisi_thermal_enable(data->regs, 1);
> -
> -	hisi_thermal_alarm_clear(data->regs, 0);
> -	hisi_thermal_alarm_enable(data->regs, 1);
> -
> -	return 0;
> -}
> -
>  static int hisi_thermal_probe(struct platform_device *pdev)
>  {
>  	struct hisi_thermal_data *data;
> -- 
> 2.7.4
>