linux-pm.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Bastian Stender <bst@pengutronix.de>
To: Zhang Rui <rui.zhang@intel.com>, Eduardo Valentin <edubezval@gmail.com>
Cc: linux-pm@vger.kernel.org, Viresh Kumar <viresh.kumar@linaro.org>,
	kernel@pengutronix.de, Bastian Stender <bst@pengutronix.de>
Subject: [PATCH] thermal: imx: remove cooling device
Date: Tue, 14 Nov 2017 14:48:29 +0100	[thread overview]
Message-ID: <20171114134829.1354-1-bst@pengutronix.de> (raw)

The cooling device should not be part of the i.MX thermal code but
rather in the i.MX cpufreq driver. So remove it here.

Signed-off-by: Bastian Stender <bst@pengutronix.de>
---
This is part of a rework of "thermal: imx: use cpufreq cooling of
registration method" (id:20171103164203.5805-1-bst@pengutronix.de).

"cpufreq: imx6q: add CPU as cooling device" will reintroduce the
cooling device.
---
 drivers/thermal/imx_thermal.c | 15 ---------------
 1 file changed, 15 deletions(-)

diff --git a/drivers/thermal/imx_thermal.c b/drivers/thermal/imx_thermal.c
index 4798b4b1fd77..3bdbde675698 100644
--- a/drivers/thermal/imx_thermal.c
+++ b/drivers/thermal/imx_thermal.c
@@ -91,7 +91,6 @@ static struct thermal_soc_data thermal_imx6sx_data = {
 struct imx_thermal_data {
 	struct cpufreq_policy *policy;
 	struct thermal_zone_device *tz;
-	struct thermal_cooling_device *cdev;
 	enum thermal_device_mode mode;
 	struct regmap *tempmon;
 	u32 c1, c2; /* See formula in imx_get_sensor_data() */
@@ -533,22 +532,12 @@ static int imx_thermal_probe(struct platform_device *pdev)
 		return -EPROBE_DEFER;
 	}
 
-	data->cdev = cpufreq_cooling_register(data->policy);
-	if (IS_ERR(data->cdev)) {
-		ret = PTR_ERR(data->cdev);
-		dev_err(&pdev->dev,
-			"failed to register cpufreq cooling device: %d\n", ret);
-		cpufreq_cpu_put(data->policy);
-		return ret;
-	}
-
 	data->thermal_clk = devm_clk_get(&pdev->dev, NULL);
 	if (IS_ERR(data->thermal_clk)) {
 		ret = PTR_ERR(data->thermal_clk);
 		if (ret != -EPROBE_DEFER)
 			dev_err(&pdev->dev,
 				"failed to get thermal clk: %d\n", ret);
-		cpufreq_cooling_unregister(data->cdev);
 		cpufreq_cpu_put(data->policy);
 		return ret;
 	}
@@ -563,7 +552,6 @@ static int imx_thermal_probe(struct platform_device *pdev)
 	ret = clk_prepare_enable(data->thermal_clk);
 	if (ret) {
 		dev_err(&pdev->dev, "failed to enable thermal clk: %d\n", ret);
-		cpufreq_cooling_unregister(data->cdev);
 		cpufreq_cpu_put(data->policy);
 		return ret;
 	}
@@ -579,7 +567,6 @@ static int imx_thermal_probe(struct platform_device *pdev)
 		dev_err(&pdev->dev,
 			"failed to register thermal zone device %d\n", ret);
 		clk_disable_unprepare(data->thermal_clk);
-		cpufreq_cooling_unregister(data->cdev);
 		cpufreq_cpu_put(data->policy);
 		return ret;
 	}
@@ -608,7 +595,6 @@ static int imx_thermal_probe(struct platform_device *pdev)
 		dev_err(&pdev->dev, "failed to request alarm irq: %d\n", ret);
 		clk_disable_unprepare(data->thermal_clk);
 		thermal_zone_device_unregister(data->tz);
-		cpufreq_cooling_unregister(data->cdev);
 		cpufreq_cpu_put(data->policy);
 		return ret;
 	}
@@ -630,7 +616,6 @@ static int imx_thermal_remove(struct platform_device *pdev)
 		clk_disable_unprepare(data->thermal_clk);
 
 	thermal_zone_device_unregister(data->tz);
-	cpufreq_cooling_unregister(data->cdev);
 	cpufreq_cpu_put(data->policy);
 
 	return 0;
-- 
2.11.0

             reply	other threads:[~2017-11-14 13:48 UTC|newest]

Thread overview: 4+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-11-14 13:48 Bastian Stender [this message]
2017-11-15  4:56 ` [PATCH] thermal: imx: remove cooling device Viresh Kumar
2017-11-15  5:00   ` Viresh Kumar
2017-11-15  9:05     ` Bastian Stender

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20171114134829.1354-1-bst@pengutronix.de \
    --to=bst@pengutronix.de \
    --cc=edubezval@gmail.com \
    --cc=kernel@pengutronix.de \
    --cc=linux-pm@vger.kernel.org \
    --cc=rui.zhang@intel.com \
    --cc=viresh.kumar@linaro.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).