[PATCH] thermal: exynos: Propagate error value from tmu_read()

[Marek Szyprowski <m.szyprowski@samsung.com>]

tmu_read() in case of Exynos4210 might return error for out of bound
values. Current code ignores such value, what leads to reporting critical
temperature value. Add proper error code propagation to exynos_get_temp()
function.

Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
CC: stable@vger.kernel.org # v4.6+
---
This patch is prepared on top of "thermal: exynos: Reading temperature
makes sense only when TMU is turned on" patch. Both are required
to finally fix thermal support on Exynos4210 based boards.

This patch only applies cleanly together with the mentioned "thermal:
exynos: Reading temperature makes sense only when TMU is turned on"
patch on v4.6+ kernels.
---
 drivers/thermal/samsung/exynos_tmu.c | 9 +++++++--
 1 file changed, 7 insertions(+), 2 deletions(-)

diff --git a/drivers/thermal/samsung/exynos_tmu.c b/drivers/thermal/samsung/exynos_tmu.c
index 986cbd01aaaa..74adeb1d2daf 100644
--- a/drivers/thermal/samsung/exynos_tmu.c
+++ b/drivers/thermal/samsung/exynos_tmu.c
@@ -892,6 +892,7 @@ static void exynos7_tmu_control(struct platform_device *pdev, bool on)
 static int exynos_get_temp(void *p, int *temp)
 {
 	struct exynos_tmu_data *data = p;
+	int value, ret = 0;
 
 	if (!data || !data->tmu_read || !data->enabled)
 		return -EINVAL;
@@ -899,12 +900,16 @@ static int exynos_get_temp(void *p, int *temp)
 	mutex_lock(&data->lock);
 	clk_enable(data->clk);
 
-	*temp = code_to_temp(data, data->tmu_read(data)) * MCELSIUS;
+	value = data->tmu_read(data);
+	if (value < 0)
+		ret = value;
+	else
+		*temp = code_to_temp(data, value) * MCELSIUS;
 
 	clk_disable(data->clk);
 	mutex_unlock(&data->lock);
 
-	return 0;
+	return ret;
 }
 
 #ifdef CONFIG_THERMAL_EMULATION
-- 
2.15.0