From: Bjorn Andersson <bjorn.andersson@linaro.org>
To: Amit Kucheria <amit.kucheria@linaro.org>
Cc: linux-kernel@vger.kernel.org, rnayak@codeaurora.org,
linux-arm-msm@vger.kernel.org, edubezval@gmail.com,
smohanad@codeaurora.org, vivek.gautam@codeaurora.org,
andy.gross@linaro.org, Zhang Rui <rui.zhang@intel.com>,
linux-pm@vger.kernel.org
Subject: Re: [PATCH v6 4/7] thermal: tsens: Rename tsens-8996 to tsens-v2 for reuse
Date: Wed, 11 Jul 2018 09:39:57 -0700 [thread overview]
Message-ID: <20180711163957.GC545@tuxbook-pro> (raw)
In-Reply-To: <910ed3e440a5612f4113318c66ae2395f53abaae.1531135999.git.amit.kucheria@linaro.org>
On Mon 09 Jul 04:43 PDT 2018, Amit Kucheria wrote:
> The TSENS block inside the 8996 is internally classified as version 2 of
> the IP. Several other SoC families use this block and can share this code.
>
> We rename get_temp() to reflect that it can be used across the v2 family.
>
> Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Regards,
Bjorn
> ---
> drivers/thermal/qcom/Makefile | 2 +-
> drivers/thermal/qcom/{tsens-8996.c => tsens-v2.c} | 26 ++++++++---------------
> 2 files changed, 10 insertions(+), 18 deletions(-)
> rename drivers/thermal/qcom/{tsens-8996.c => tsens-v2.c} (66%)
>
> diff --git a/drivers/thermal/qcom/Makefile b/drivers/thermal/qcom/Makefile
> index 2cc2193..a821929 100644
> --- a/drivers/thermal/qcom/Makefile
> +++ b/drivers/thermal/qcom/Makefile
> @@ -1,2 +1,2 @@
> obj-$(CONFIG_QCOM_TSENS) += qcom_tsens.o
> -qcom_tsens-y += tsens.o tsens-common.o tsens-8916.o tsens-8974.o tsens-8960.o tsens-8996.o
> +qcom_tsens-y += tsens.o tsens-common.o tsens-8916.o tsens-8974.o tsens-8960.o tsens-v2.o
> diff --git a/drivers/thermal/qcom/tsens-8996.c b/drivers/thermal/qcom/tsens-v2.c
> similarity index 66%
> rename from drivers/thermal/qcom/tsens-8996.c
> rename to drivers/thermal/qcom/tsens-v2.c
> index 60765b1..34ba6c7 100644
> --- a/drivers/thermal/qcom/tsens-8996.c
> +++ b/drivers/thermal/qcom/tsens-v2.c
> @@ -1,27 +1,18 @@
> +// SPDX-License-Identifier: GPL-2.0
> /*
> * Copyright (c) 2015, The Linux Foundation. All rights reserved.
> - *
> - * This program is free software; you can redistribute it and/or modify
> - * it under the terms of the GNU General Public License version 2 and
> - * only version 2 as published by the Free Software Foundation.
> - *
> - * This program is distributed in the hope that it will be useful,
> - * but WITHOUT ANY WARRANTY; without even the implied warranty of
> - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> - * GNU General Public License for more details.
> - *
> + * Copyright (c) 2018, Linaro Limited
> */
>
> -#include <linux/platform_device.h>
> #include <linux/regmap.h>
> #include "tsens.h"
>
> -#define STATUS_OFFSET 0x10a0
> -#define LAST_TEMP_MASK 0xfff
> +#define STATUS_OFFSET 0xa0
> +#define LAST_TEMP_MASK 0xfff
> #define STATUS_VALID_BIT BIT(21)
> #define CODE_SIGN_BIT BIT(11)
>
> -static int get_temp_8996(struct tsens_device *tmdev, int id, int *temp)
> +static int get_temp_tsens_v2(struct tsens_device *tmdev, int id, int *temp)
> {
> struct tsens_sensor *s = &tmdev->sensor[id];
> u32 code;
> @@ -73,12 +64,13 @@ static int get_temp_8996(struct tsens_device *tmdev, int id, int *temp)
> return 0;
> }
>
> -static const struct tsens_ops ops_8996 = {
> +static const struct tsens_ops ops_generic_v2 = {
> .init = init_common,
> - .get_temp = get_temp_8996,
> + .get_temp = get_temp_tsens_v2,
> };
>
> const struct tsens_data data_8996 = {
> .num_sensors = 13,
> - .ops = &ops_8996,
> + .ops = &ops_generic_v2,
> };
> +
> --
> 2.7.4
>
next prev parent reply other threads:[~2018-07-11 16:39 UTC|newest]
Thread overview: 17+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-07-09 11:43 [PATCH v6 0/7] thermal: tsens: Refactoring for TSENSv2 IP Amit Kucheria
2018-07-09 11:43 ` [PATCH v6 1/7] thermal: tsens: Get rid of unused fields in structure Amit Kucheria
2018-07-09 11:43 ` [PATCH v6 2/7] thermal: tsens: Add support to split up register address space into two Amit Kucheria
2018-07-11 16:34 ` Bjorn Andersson
2018-07-11 18:37 ` Doug Anderson
2018-07-12 4:40 ` Amit Kucheria
2018-07-09 11:43 ` [PATCH v6 4/7] thermal: tsens: Rename tsens-8996 to tsens-v2 for reuse Amit Kucheria
2018-07-11 16:39 ` Bjorn Andersson [this message]
2018-07-09 11:43 ` [PATCH v6 5/7] thermal: tsens: Add generic support for TSENS v2 IP Amit Kucheria
2018-07-11 16:40 ` Bjorn Andersson
2018-07-11 18:40 ` Doug Anderson
2018-07-12 5:12 ` Amit Kucheria
2018-07-09 11:43 ` [PATCH v6 6/7] dt: thermal: tsens: Document the fallback DT property for v2 of TSENS IP Amit Kucheria
2018-07-11 13:49 ` Rob Herring
2018-07-11 16:42 ` Bjorn Andersson
2018-07-11 18:42 ` Doug Anderson
2018-07-12 5:56 ` Amit Kucheria
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180711163957.GC545@tuxbook-pro \
--to=bjorn.andersson@linaro.org \
--cc=amit.kucheria@linaro.org \
--cc=andy.gross@linaro.org \
--cc=edubezval@gmail.com \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pm@vger.kernel.org \
--cc=rnayak@codeaurora.org \
--cc=rui.zhang@intel.com \
--cc=smohanad@codeaurora.org \
--cc=vivek.gautam@codeaurora.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).