Linux Power Management development
 help / color / mirror / Atom feed
From: Andreas Herrmann <aherrmann@suse.com>
To: "Rafael J. Wysocki" <rjw@rjwysocki.net>
Cc: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>,
	Linux PM <linux-pm@vger.kernel.org>,
	"Rafael J. Wysocki" <rafael.j.wysocki@intel.com>,
	Peter Zijlstra <peterz@infradead.org>,
	Frederic Weisbecker <frederic@kernel.org>,
	Viresh Kumar <viresh.kumar@linaro.org>,
	Linux Kernel Mailing List <linux-kernel@vger.kernel.org>
Subject: Re: [PATCH] cpufreq: intel_pstate: Register when ACPI PCCH is present
Date: Wed, 18 Jul 2018 12:43:00 +0200	[thread overview]
Message-ID: <20180718104300.dwgbqbnllvhwzrea@suselix> (raw)
In-Reply-To: <2386802.jRaeHeNqoJ@aspire.rjw.lan>

On Tue, Jul 17, 2018 at 08:06:54PM +0200, Rafael J. Wysocki wrote:
> From: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
> 
> Currently, intel_pstate doesn't load if _PSS is not present on
> HP Proliant systems, because it expects the firmware to take over
> CPU performance scaling in that case.  However, if ACPI PCCH is
> present, the firmware expects the kernel to use it for CPU
> performance scaling and the pcc-cpufreq driver is loaded for that.
> 
> Unfortunately, the firmware interface used by that driver is not
> scalable for fundamental reasons, so pcc-cpufreq is way suboptimal
> on systems with more than just a few CPUs.  In fact, it is better to
> avoid using it at all.
> 
> For this reason, modify intel_pstate to look for ACPI PCCH if _PSS
> is not present and register if it is there.  Also prevent the
> pcc-cpufreq driver from trying to initialize if intel_pstate has
> been registered already.
> 
> Fixes: fbbcdc0744da (intel_pstate: skip the driver if ACPI has power mgmt option)
> Reported-by: Andreas Herrmann <aherrmann@suse.com>
> Reviewed-by: Andreas Herrmann <aherrmann@suse.com>
> Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
> ---
> 
> This is a replacement for https://patchwork.kernel.org/patch/10530091/
> 
> In addition to the intel_pstate changes in the above, it also
> prevents pcc-cpufreq from trying to initialize (which will fail
> ultimately, but may confuse the firmware in the meantime).
> 
> Andreas, please test this one and let me know if it still works for you.

Done that (with system in "Dynamic Power Savings Mode"). It still
works and system was stable.

FYI, as a sniff test I've run a kernbench test. I now repeat the test
with system switched to "OS control mode". Just in case -- if there
was interference with platform code while system was in "Dynamic Power
Savings Mode" (significantly affecting performance) I might spot it
this way.


Andreas


> Thanks,
> Rafael
> 
> ---
>  drivers/cpufreq/intel_pstate.c |   17 ++++++++++++++++-
>  drivers/cpufreq/pcc-cpufreq.c  |    4 ++++
>  2 files changed, 20 insertions(+), 1 deletion(-)
> 
> Index: linux-pm/drivers/cpufreq/intel_pstate.c
> ===================================================================
> --- linux-pm.orig/drivers/cpufreq/intel_pstate.c
> +++ linux-pm/drivers/cpufreq/intel_pstate.c
> @@ -2391,6 +2391,18 @@ static bool __init intel_pstate_no_acpi_
>  	return true;
>  }
>  
> +static bool __init intel_pstate_no_acpi_pcch(void)
> +{
> +	acpi_status status;
> +	acpi_handle handle;
> +
> +	status = acpi_get_handle(NULL, "\\_SB", &handle);
> +	if (ACPI_FAILURE(status))
> +		return true;
> +
> +	return !acpi_has_method(handle, "PCCH");
> +}
> +
>  static bool __init intel_pstate_has_acpi_ppc(void)
>  {
>  	int i;
> @@ -2450,7 +2462,10 @@ static bool __init intel_pstate_platform
>  
>  	switch (plat_info[idx].data) {
>  	case PSS:
> -		return intel_pstate_no_acpi_pss();
> +		if (!intel_pstate_no_acpi_pss())
> +			return false;
> +
> +		return intel_pstate_no_acpi_pcch();
>  	case PPC:
>  		return intel_pstate_has_acpi_ppc() && !force_load;
>  	}
> Index: linux-pm/drivers/cpufreq/pcc-cpufreq.c
> ===================================================================
> --- linux-pm.orig/drivers/cpufreq/pcc-cpufreq.c
> +++ linux-pm/drivers/cpufreq/pcc-cpufreq.c
> @@ -580,6 +580,10 @@ static int __init pcc_cpufreq_init(void)
>  {
>  	int ret;
>  
> +	/* Skip initialization if another cpufreq driver is there. */
> +	if (cpufreq_get_current_driver())
> +		return 0;
> +
>  	if (acpi_disabled)
>  		return 0;
>  
> 
> 

  reply	other threads:[~2018-07-18 10:43 UTC|newest]

Thread overview: 36+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-07-17  6:50 Commit 554c8aa8ecad causing severe performance degression with pcc-cpufreq Andreas Herrmann
2018-07-17  7:33 ` Rafael J. Wysocki
2018-07-17  8:03   ` Rafael J. Wysocki
2018-07-17  8:50     ` Andreas Herrmann
2018-07-17  8:58       ` Rafael J. Wysocki
2018-07-17  9:06       ` Rafael J. Wysocki
2018-07-17  9:11         ` Andreas Herrmann
2018-07-17  9:23           ` Rafael J. Wysocki
2018-07-17  9:27             ` Andreas Herrmann
2018-07-17  9:36               ` Andreas Herrmann
2018-07-17 10:09                 ` Rafael J. Wysocki
2018-07-17 10:21                   ` Andreas Herrmann
2018-07-17 10:23                     ` Rafael J. Wysocki
2018-07-17 14:03                     ` Andreas Herrmann
2018-07-17 15:29                       ` Rafael J. Wysocki
2018-07-17 16:13                       ` [PATCH] cpufreq: intel_pstate: Load when ACPI PCCH is present Rafael J. Wysocki
2018-07-17 17:23                         ` Srinivas Pandruvada
2018-07-17 17:28                           ` Rafael J. Wysocki
2018-07-17 18:06                         ` [PATCH] cpufreq: intel_pstate: Register " Rafael J. Wysocki
2018-07-18 10:43                           ` Andreas Herrmann [this message]
2018-07-18 10:51                             ` Rafael J. Wysocki
2018-07-17 10:18                 ` Commit 554c8aa8ecad causing severe performance degression with pcc-cpufreq Andreas Herrmann
2018-07-17  8:08   ` Daniel Lezcano
2018-07-17  8:36   ` Andreas Herrmann
2018-07-17  8:52     ` Rafael J. Wysocki
2018-07-17  8:15 ` Peter Zijlstra
2018-07-17  9:05   ` Andreas Herrmann
2018-07-17 12:02 ` [PATCH] cpufreq: pcc-cpufreq: Disable dynamic scaling on many-CPU systems Rafael J. Wysocki
2018-07-17 16:14   ` [PATCH v2] " Rafael J. Wysocki
2018-07-17 20:13     ` Andreas Herrmann
2018-07-18  7:44       ` Rafael J. Wysocki
2018-07-18  8:23       ` Peter Zijlstra
2018-07-18  9:34         ` Andreas Herrmann
2018-07-18 15:25 ` Commit 554c8aa8ecad causing severe performance degression with pcc-cpufreq Andreas Herrmann
2018-07-18 15:31   ` Andreas Herrmann
2018-07-19 11:04     ` Andreas Herrmann

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20180718104300.dwgbqbnllvhwzrea@suselix \
    --to=aherrmann@suse.com \
    --cc=frederic@kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pm@vger.kernel.org \
    --cc=peterz@infradead.org \
    --cc=rafael.j.wysocki@intel.com \
    --cc=rjw@rjwysocki.net \
    --cc=srinivas.pandruvada@linux.intel.com \
    --cc=viresh.kumar@linaro.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox