From mboxrd@z Thu Jan  1 00:00:00 1970
From: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Subject: Re: [PATCH] console: Add console=auto option
Date: Thu, 16 Aug 2018 17:09:48 +0200
Message-ID: <20180816150948.GA10648@kroah.com>
References: <20180816141055.451-1-prarit@redhat.com>
Mime-Version: 1.0
Content-Type: text/plain; charset=us-ascii
Return-path: <linux-kernel-owner@vger.kernel.org>
Content-Disposition: inline
In-Reply-To: <20180816141055.451-1-prarit@redhat.com>
Sender: linux-kernel-owner@vger.kernel.org
To: Prarit Bhargava <prarit@redhat.com>
Cc: linux-kernel@vger.kernel.org, Mark Salter <msalter@redhat.com>, Al Stone <ahs3@redhat.com>, "Rafael J. Wysocki" <rjw@rjwysocki.net>, Len Brown <len.brown@intel.com>, Pavel Machek <pavel@ucw.cz>, x86@kernel.org, Petr Mladek <pmladek@suse.com>, Sergey Senozhatsky <sergey.senozhatsky@gmail.com>, Steven Rostedt <rostedt@goodmis.org>, Kees Cook <keescook@chromium.org>, linux-pm@vger.kernel.org
List-Id: linux-pm@vger.kernel.org

On Thu, Aug 16, 2018 at 10:10:55AM -0400, Prarit Bhargava wrote:
> ACPI may contain an SPCR table that defines a default system console.
> On ARM if the table is present then the SPCR console is enabled by default.
> On x86 the SPCR console is used if 'earlycon' (no parameters) is
> specified as a kernel parameter and is used only as the early console.
> To use the SPCR data as a console a user must boot with 'earlycon',
> grep logs & specify a console= kernel parameter, and then reboot again.
> 
> Add 'console=auto' that enables a firmware or hardware console, and on
> x86 enable the SPCR console if 'console=auto' is specified.
> 
> Tested on systems with and without an ACPI SPCR.  The following kernel
> parameters were also tested:
> 
> console=ttyS0,115200    		works
> earlycon                		works (early console only)
> console=auto            		works (full console as expected)
> no console or earlycon arguments	works (no output as expected)
> 
> Signed-off-by: Prarit Bhargava <prarit@redhat.com>
> Cc: Mark Salter <msalter@redhat.com>
> Cc: Al Stone <ahs3@redhat.com>
> Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net>
> Cc: Len Brown <len.brown@intel.com>
> Cc: Pavel Machek <pavel@ucw.cz>
> Cc: x86@kernel.org
> Cc: Petr Mladek <pmladek@suse.com>
> Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
> Cc: Steven Rostedt <rostedt@goodmis.org>
> Cc: Kees Cook <keescook@chromium.org>
> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
> Cc: linux-pm@vger.kernel.org
> ---
>  Documentation/admin-guide/kernel-parameters.txt |  1 +
>  arch/x86/kernel/acpi/boot.c                     |  5 +++++
>  include/linux/console.h                         |  1 +
>  kernel/printk/printk.c                          | 10 ++++++++++
>  4 files changed, 17 insertions(+)
> 
> diff --git a/Documentation/admin-guide/kernel-parameters.txt b/Documentation/admin-guide/kernel-parameters.txt
> index a32f2a126791..dd057224f33b 100644
> --- a/Documentation/admin-guide/kernel-parameters.txt
> +++ b/Documentation/admin-guide/kernel-parameters.txt
> @@ -635,6 +635,7 @@
>  
>  		hvc<n>	Use the hypervisor console device <n>. This is for
>  			both Xen and PowerPC hypervisors.
> +		auto	[X86] Enable ACPI SPCR console
>  
>  		If the device connected to the port is not a TTY but a braille
>  		device, prepend "brl," before the device type, for instance
> diff --git a/arch/x86/kernel/acpi/boot.c b/arch/x86/kernel/acpi/boot.c
> index 3b20607d581b..fb2616ba3b21 100644
> --- a/arch/x86/kernel/acpi/boot.c
> +++ b/arch/x86/kernel/acpi/boot.c
> @@ -1771,3 +1771,8 @@ void __init arch_reserve_mem_area(acpi_physical_address addr, size_t size)
>  	e820__range_add(addr, size, E820_TYPE_ACPI);
>  	e820__update_table_print();
>  }
> +
> +void __init arch_console_setup(void)
> +{
> +	acpi_parse_spcr(false, true);
> +}

<snip>

> +int arch_console_setup(void);

Function does not match its prototype :(

How did you build this successfully?