From: Tony Lindgren <tony@atomide.com>
To: Sebastian Reichel <sre@kernel.org>
Cc: linux-pm@vger.kernel.org, linux-omap@vger.kernel.org,
Pavel Machek <pavel@ucw.cz>
Subject: [PATCH 3/7] power: supply: cpcap-battery: Fix signed counter sample register
Date: Sun, 7 Apr 2019 11:12:50 -0700 [thread overview]
Message-ID: <20190407181254.64537-4-tony@atomide.com> (raw)
In-Reply-To: <20190407181254.64537-1-tony@atomide.com>
The accumulator sample register is signed 32-bits wide register on
droid 4. And only the earlier version of cpcap has a signed 24-bits
wide register. We're currently passing it around as unsigned, so
let's fix that and use sign_extend32() for the earlier revision.
Cc: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
drivers/power/supply/cpcap-battery.c | 11 ++++++-----
1 file changed, 6 insertions(+), 5 deletions(-)
diff --git a/drivers/power/supply/cpcap-battery.c b/drivers/power/supply/cpcap-battery.c
--- a/drivers/power/supply/cpcap-battery.c
+++ b/drivers/power/supply/cpcap-battery.c
@@ -82,7 +82,7 @@ struct cpcap_battery_config {
};
struct cpcap_coulomb_counter_data {
- s32 sample; /* 24-bits */
+ s32 sample; /* 24 or 32 bits */
s32 accumulator;
s16 offset; /* 10-bits */
};
@@ -213,7 +213,7 @@ static int cpcap_battery_get_current(struct cpcap_battery_ddata *ddata)
* TI or ST coulomb counter in the PMIC.
*/
static int cpcap_battery_cc_raw_div(struct cpcap_battery_ddata *ddata,
- u32 sample, s32 accumulator,
+ s32 sample, s32 accumulator,
s16 offset, u32 divider)
{
s64 acc;
@@ -224,7 +224,6 @@ static int cpcap_battery_cc_raw_div(struct cpcap_battery_ddata *ddata,
if (!divider)
return 0;
- sample &= 0xffffff; /* 24-bits, unsigned */
offset &= 0x7ff; /* 10-bits, signed */
switch (ddata->vendor) {
@@ -259,7 +258,7 @@ static int cpcap_battery_cc_raw_div(struct cpcap_battery_ddata *ddata,
/* 3600000μAms = 1μAh */
static int cpcap_battery_cc_to_uah(struct cpcap_battery_ddata *ddata,
- u32 sample, s32 accumulator,
+ s32 sample, s32 accumulator,
s16 offset)
{
return cpcap_battery_cc_raw_div(ddata, sample,
@@ -268,7 +267,7 @@ static int cpcap_battery_cc_to_uah(struct cpcap_battery_ddata *ddata,
}
static int cpcap_battery_cc_to_ua(struct cpcap_battery_ddata *ddata,
- u32 sample, s32 accumulator,
+ s32 sample, s32 accumulator,
s16 offset)
{
return cpcap_battery_cc_raw_div(ddata, sample,
@@ -312,6 +311,8 @@ cpcap_battery_read_accumulated(struct cpcap_battery_ddata *ddata,
/* Sample value CPCAP_REG_CCS1 & 2 */
ccd->sample = (buf[1] & 0x0fff) << 16;
ccd->sample |= buf[0];
+ if (ddata->vendor == CPCAP_VENDOR_TI)
+ ccd->sample = sign_extend32(24, ccd->sample);
/* Accumulator value CPCAP_REG_CCA1 & 2 */
ccd->accumulator = ((s16)buf[3]) << 16;
--
2.21.0
next prev parent reply other threads:[~2019-04-07 18:13 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-04-07 18:12 [PATCH 0/7] Some fixes and improvments for cpcap battery and charger Tony Lindgren
2019-04-07 18:12 ` [PATCH 1/7] power: supply: cpcap-battery: Fix division by zero Tony Lindgren
2019-04-08 12:01 ` Pavel Machek
2019-04-07 18:12 ` [PATCH 2/7] power: supply: cpcap-battery: Fix low battery check Tony Lindgren
2019-05-05 19:14 ` Pavel Machek
2019-04-07 18:12 ` Tony Lindgren [this message]
2019-04-08 12:03 ` [PATCH 3/7] power: supply: cpcap-battery: Fix signed counter sample register Pavel Machek
2019-04-07 18:12 ` [PATCH 4/7] power: supply: cpcap-battery: Fix coulomb counter calibration register use Tony Lindgren
2019-04-08 12:03 ` Pavel Machek
2019-04-07 18:12 ` [PATCH 5/7] power: supply: cpcap-battery: Use accumulator for current and power average Tony Lindgren
2019-04-07 18:12 ` [PATCH 6/7] power: supply: cpcap-battery: Fix pointless EPROBE_DEFER warnings Tony Lindgren
2019-04-08 12:04 ` Pavel Machek
2019-04-07 18:12 ` [PATCH 7/7] power: supply: cpcap-charger: " Tony Lindgren
2019-04-15 21:31 ` [PATCH 0/7] Some fixes and improvments for cpcap battery and charger Sebastian Reichel
2019-05-18 18:33 ` Tony Lindgren
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190407181254.64537-4-tony@atomide.com \
--to=tony@atomide.com \
--cc=linux-omap@vger.kernel.org \
--cc=linux-pm@vger.kernel.org \
--cc=pavel@ucw.cz \
--cc=sre@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).