[PATCH 5/7] power: supply: cpcap-battery: Use accumulator for current and power average

[Tony Lindgren <tony@atomide.com>]

We should not use measured current value for average since we have proper
coulomb counter values available. Using measured current value should
be only used when the value is queried at a higher rate than the 250 ms
rate the coulomb counter is configured to run at.

Cc: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
 drivers/power/supply/cpcap-battery.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/drivers/power/supply/cpcap-battery.c b/drivers/power/supply/cpcap-battery.c
--- a/drivers/power/supply/cpcap-battery.c
+++ b/drivers/power/supply/cpcap-battery.c
@@ -476,11 +476,11 @@ static int cpcap_battery_get_property(struct power_supply *psy,
 		val->intval = ddata->config.info.voltage_min_design;
 		break;
 	case POWER_SUPPLY_PROP_CURRENT_AVG:
-		if (cached) {
+		sample = latest->cc.sample - previous->cc.sample;
+		if (!sample) {
 			val->intval = cpcap_battery_cc_get_avg_current(ddata);
 			break;
 		}
-		sample = latest->cc.sample - previous->cc.sample;
 		accumulator = latest->cc.accumulator - previous->cc.accumulator;
 		val->intval = cpcap_battery_cc_to_ua(ddata, sample,
 						     accumulator,
@@ -497,13 +497,13 @@ static int cpcap_battery_get_property(struct power_supply *psy,
 		val->intval = div64_s64(tmp, 100);
 		break;
 	case POWER_SUPPLY_PROP_POWER_AVG:
-		if (cached) {
+		sample = latest->cc.sample - previous->cc.sample;
+		if (!sample) {
 			tmp = cpcap_battery_cc_get_avg_current(ddata);
 			tmp *= (latest->voltage / 10000);
 			val->intval = div64_s64(tmp, 100);
 			break;
 		}
-		sample = latest->cc.sample - previous->cc.sample;
 		accumulator = latest->cc.accumulator - previous->cc.accumulator;
 		tmp = cpcap_battery_cc_to_ua(ddata, sample, accumulator,
 					     latest->cc.offset);
-- 
2.21.0