[PATCH AUTOSEL 4.19 017/141] thermal: rcar_gen3_thermal: disable interrupt in .remove

[PATCH AUTOSEL 4.19 017/141] thermal: rcar_gen3_thermal: disable interrupt in .remove

[Sasha Levin]

From: Jiada Wang <jiada_wang@mentor.com>

[ Upstream commit 63f55fcea50c25ae5ad45af92d08dae3b84534c2 ]

Currently IRQ remains enabled after .remove, later if device is probed,
IRQ is requested before .thermal_init, this may cause IRQ function be
called before device is initialized.

this patch disables interrupt in .remove, to ensure irq function
only be called after device is fully initialized.

Signed-off-by: Jiada Wang <jiada_wang@mentor.com>
Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
Reviewed-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/thermal/rcar_gen3_thermal.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/drivers/thermal/rcar_gen3_thermal.c b/drivers/thermal/rcar_gen3_thermal.c
index 7aed5337bdd35..704c8ad045bb5 100644
--- a/drivers/thermal/rcar_gen3_thermal.c
+++ b/drivers/thermal/rcar_gen3_thermal.c
@@ -328,6 +328,9 @@ MODULE_DEVICE_TABLE(of, rcar_gen3_thermal_dt_ids);
 static int rcar_gen3_thermal_remove(struct platform_device *pdev)
 {
 	struct device *dev = &pdev->dev;
+	struct rcar_gen3_thermal_priv *priv = dev_get_drvdata(dev);
+
+	rcar_thermal_irq_set(priv, false);
 
 	pm_runtime_put(dev);
 	pm_runtime_disable(dev);
-- 
2.20.1

[PATCH AUTOSEL 4.19 018/141] drivers: thermal: tsens: Don't print error message on -EPROBE_DEFER

[Sasha Levin]

From: Amit Kucheria <amit.kucheria@linaro.org>

[ Upstream commit fc7d18cf6a923cde7f5e7ba2c1105bb106d3e29a ]

We print a calibration failure message on -EPROBE_DEFER from
nvmem/qfprom as follows:
[    3.003090] qcom-tsens 4a9000.thermal-sensor: version: 1.4
[    3.005376] qcom-tsens 4a9000.thermal-sensor: tsens calibration failed
[    3.113248] qcom-tsens 4a9000.thermal-sensor: version: 1.4

This confuses people when, in fact, calibration succeeds later when
nvmem/qfprom device is available. Don't print this message on a
-EPROBE_DEFER.

Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/thermal/qcom/tsens.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/thermal/qcom/tsens.c b/drivers/thermal/qcom/tsens.c
index a2c9bfae3d867..b139713289a42 100644
--- a/drivers/thermal/qcom/tsens.c
+++ b/drivers/thermal/qcom/tsens.c
@@ -171,7 +171,8 @@ static int tsens_probe(struct platform_device *pdev)
 	if (tmdev->ops->calibrate) {
 		ret = tmdev->ops->calibrate(tmdev);
 		if (ret < 0) {
-			dev_err(dev, "tsens calibration failed\n");
+			if (ret != -EPROBE_DEFER)
+				dev_err(dev, "tsens calibration failed\n");
 			return ret;
 		}
 	}
-- 
2.20.1