From: Dmitry Osipenko <digetx@gmail.com>
To: Thierry Reding <thierry.reding@gmail.com>,
MyungJoo Ham <myungjoo.ham@samsung.com>,
Kyungmin Park <kyungmin.park@samsung.com>,
Chanwoo Choi <cw00.choi@samsung.com>,
Jonathan Hunter <jonathanh@nvidia.com>,
Tomeu Vizoso <tomeu.vizoso@collabora.com>,
Peter Geis <pgwipeout@gmail.com>
Cc: linux-pm@vger.kernel.org, linux-tegra@vger.kernel.org,
linux-kernel@vger.kernel.org
Subject: [PATCH v7 06/19] PM / devfreq: tegra30: Use kHz units uniformly in the code
Date: Wed, 30 Oct 2019 01:00:06 +0300 [thread overview]
Message-ID: <20191029220019.26773-7-digetx@gmail.com> (raw)
In-Reply-To: <20191029220019.26773-1-digetx@gmail.com>
Part of the code uses Hz units and the other kHz, let's switch to kHz
everywhere for consistency. A small benefit from this change (besides
code's cleanup) is that now powertop utility correctly displays devfreq's
stats, for some reason it expects them to be in kHz.
Tested-by: Peter Geis <pgwipeout@gmail.com>
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
---
drivers/devfreq/tegra30-devfreq.c | 11 ++++++-----
1 file changed, 6 insertions(+), 5 deletions(-)
diff --git a/drivers/devfreq/tegra30-devfreq.c b/drivers/devfreq/tegra30-devfreq.c
index 1d22f5239cd5..06c5376a7201 100644
--- a/drivers/devfreq/tegra30-devfreq.c
+++ b/drivers/devfreq/tegra30-devfreq.c
@@ -448,7 +448,7 @@ static int tegra_devfreq_target(struct device *dev, unsigned long *freq,
rate = dev_pm_opp_get_freq(opp);
dev_pm_opp_put(opp);
- err = clk_set_min_rate(tegra->emc_clock, rate);
+ err = clk_set_min_rate(tegra->emc_clock, rate * KHZ);
if (err)
return err;
@@ -477,7 +477,7 @@ static int tegra_devfreq_get_dev_status(struct device *dev,
stat->private_data = tegra;
/* The below are to be used by the other governors */
- stat->current_frequency = cur_freq * KHZ;
+ stat->current_frequency = cur_freq;
actmon_dev = &tegra->devices[MCALL];
@@ -527,7 +527,7 @@ static int tegra_governor_get_target(struct devfreq *devfreq,
target_freq = max(target_freq, dev->target_freq);
}
- *freq = target_freq * KHZ;
+ *freq = target_freq;
return 0;
}
@@ -663,7 +663,7 @@ static int tegra_devfreq_probe(struct platform_device *pdev)
goto remove_opps;
}
- err = dev_pm_opp_add(&pdev->dev, rate, 0);
+ err = dev_pm_opp_add(&pdev->dev, rate / KHZ, 0);
if (err) {
dev_err(&pdev->dev, "Failed to add OPP: %d\n", err);
goto remove_opps;
@@ -686,7 +686,8 @@ static int tegra_devfreq_probe(struct platform_device *pdev)
goto unreg_notifier;
}
- tegra_devfreq_profile.initial_freq = clk_get_rate(tegra->emc_clock);
+ tegra_devfreq_profile.initial_freq = tegra->cur_freq;
+
devfreq = devfreq_add_device(&pdev->dev, &tegra_devfreq_profile,
"tegra_actmon", NULL);
if (IS_ERR(devfreq)) {
--
2.23.0
next prev parent reply other threads:[~2019-10-29 22:07 UTC|newest]
Thread overview: 34+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-10-29 22:00 [PATCH v7 00/19] More improvements for Tegra30 devfreq driver Dmitry Osipenko
2019-10-29 22:00 ` [PATCH v7 01/19] PM / devfreq: tegra30: Change irq type to unsigned int Dmitry Osipenko
2019-10-29 22:00 ` [PATCH v7 02/19] PM / devfreq: tegra30: Keep interrupt disabled while governor is stopped Dmitry Osipenko
2019-10-29 22:00 ` [PATCH v7 03/19] PM / devfreq: tegra30: Handle possible round-rate error Dmitry Osipenko
2019-10-29 22:00 ` [PATCH v7 04/19] PM / devfreq: tegra30: Drop write-barrier Dmitry Osipenko
2019-10-29 22:00 ` [PATCH v7 05/19] PM / devfreq: tegra30: Fix integer overflow on CPU's freq max out Dmitry Osipenko
2019-10-29 22:00 ` Dmitry Osipenko [this message]
2019-10-31 4:44 ` [PATCH v7 06/19] PM / devfreq: tegra30: Use kHz units uniformly in the code Chanwoo Choi
2019-10-31 23:08 ` Dmitry Osipenko
2019-10-29 22:00 ` [PATCH v7 07/19] PM / devfreq: tegra30: Use CPUFreq notifier Dmitry Osipenko
2019-10-29 22:00 ` [PATCH v7 08/19] PM / devfreq: tegra30: Move clk-notifier's registration to governor's start Dmitry Osipenko
2019-10-29 22:00 ` [PATCH v7 09/19] PM / devfreq: tegra30: Reset boosting on startup Dmitry Osipenko
2019-10-29 22:00 ` [PATCH v7 10/19] PM / devfreq: tegra30: Don't enable consecutive-down interrupt " Dmitry Osipenko
2019-10-29 22:00 ` [PATCH v7 11/19] PM / devfreq: tegra30: Constify structs Dmitry Osipenko
2019-10-29 22:00 ` [PATCH v7 12/19] PM / devfreq: tegra30: Include appropriate header Dmitry Osipenko
2019-10-29 22:00 ` [PATCH v7 13/19] PM / devfreq: tegra30: Increase sampling period to 16ms Dmitry Osipenko
2019-11-01 21:53 ` Michał Mirosław
2019-10-29 22:00 ` [PATCH v7 14/19] PM / devfreq: tegra30: Don't enable already enabled consecutive interrupts Dmitry Osipenko
2019-11-01 7:00 ` Chanwoo Choi
2019-10-29 22:00 ` [PATCH v7 15/19] PM / devfreq: tegra30: Disable consecutive interrupts when appropriate Dmitry Osipenko
2019-11-01 7:01 ` Chanwoo Choi
2019-10-29 22:00 ` [PATCH v7 16/19] PM / devfreq: Add new interrupt_driven flag for governors Dmitry Osipenko
2019-11-01 7:32 ` Chanwoo Choi
2019-11-01 13:56 ` Dmitry Osipenko
2019-10-29 22:00 ` [PATCH v7 17/19] PM / devfreq: tegra30: Support variable polling interval Dmitry Osipenko
2019-11-01 7:41 ` Chanwoo Choi
2019-11-01 13:55 ` Dmitry Osipenko
2019-11-01 21:58 ` Michał Mirosław
2019-11-01 22:23 ` Dmitry Osipenko
2019-11-03 15:25 ` Dmitry Osipenko
2019-10-29 22:00 ` [PATCH v7 18/19] PM / devfreq: tegra30: Tune up MCCPU boost-down coefficient Dmitry Osipenko
2019-11-01 7:45 ` Chanwoo Choi
2019-11-01 14:14 ` Dmitry Osipenko
2019-10-29 22:00 ` [PATCH v7 19/19] PM / devfreq: tegra20/30: Add Dmitry as a maintainer Dmitry Osipenko
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20191029220019.26773-7-digetx@gmail.com \
--to=digetx@gmail.com \
--cc=cw00.choi@samsung.com \
--cc=jonathanh@nvidia.com \
--cc=kyungmin.park@samsung.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pm@vger.kernel.org \
--cc=linux-tegra@vger.kernel.org \
--cc=myungjoo.ham@samsung.com \
--cc=pgwipeout@gmail.com \
--cc=thierry.reding@gmail.com \
--cc=tomeu.vizoso@collabora.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).