From: Matthias Kaehlcke <mka@chromium.org>
To: Chanwoo Choi <cw00.choi@samsung.com>
Cc: MyungJoo Ham <myungjoo.ham@samsung.com>,
Kyungmin Park <kyungmin.park@samsung.com>,
Zhang Rui <rui.zhang@intel.com>,
Daniel Lezcano <daniel.lezcano@linaro.org>,
Amit Kucheria <amit.kucheria@verdurent.com>,
Leonard Crestez <leonard.crestez@nxp.com>,
linux-kernel@vger.kernel.org, linux-pm@vger.kernel.org
Subject: Re: [PATCH 1/2] thermal: devfreq_cooling: Use PM QoS to set frequency limits
Date: Tue, 14 Jan 2020 10:51:02 -0800 [thread overview]
Message-ID: <20200114185102.GJ89495@google.com> (raw)
In-Reply-To: <bae154ef-cbe6-de24-26c7-a7d4338bd55e@samsung.com>
On Mon, Jan 13, 2020 at 04:25:17PM +0900, Chanwoo Choi wrote:
> Hi,
>
> On 1/11/20 2:49 AM, Matthias Kaehlcke wrote:
> > Now that devfreq supports limiting the frequency range of a device
> > through PM QoS make use of it instead of disabling OPPs that should
> > not be used.
> >
> > Signed-off-by: Matthias Kaehlcke <mka@chromium.org>
> > ---
> >
> > drivers/thermal/devfreq_cooling.c | 66 ++++++++++---------------------
> > 1 file changed, 20 insertions(+), 46 deletions(-)
> >
> > diff --git a/drivers/thermal/devfreq_cooling.c b/drivers/thermal/devfreq_cooling.c
> > index ef59256887ff..3a63603afcf2 100644
> > --- a/drivers/thermal/devfreq_cooling.c
> > +++ b/drivers/thermal/devfreq_cooling.c
> > @@ -24,11 +24,13 @@
> > #include <linux/idr.h>
> > #include <linux/slab.h>
> > #include <linux/pm_opp.h>
> > +#include <linux/pm_qos.h>
> > #include <linux/thermal.h>
> >
> > #include <trace/events/thermal.h>
> >
> > -#define SCALE_ERROR_MITIGATION 100
> > +#define HZ_PER_KHZ 1000
> > +#define SCALE_ERROR_MITIGATION 100
> >
> > static DEFINE_IDA(devfreq_ida);
> >
> > @@ -65,49 +67,9 @@ struct devfreq_cooling_device {
> > struct devfreq_cooling_power *power_ops;
> > u32 res_util;
> > int capped_state;
> > + struct dev_pm_qos_request req_max_freq;
>
> Need to add the description of 'req_max_freq'.
will add the description
> > };
> >
> > -/**
> > - * partition_enable_opps() - disable all opps above a given state
> > - * @dfc: Pointer to devfreq we are operating on
> > - * @cdev_state: cooling device state we're setting
> > - *
> > - * Go through the OPPs of the device, enabling all OPPs until
> > - * @cdev_state and disabling those frequencies above it.
> > - */
> > -static int partition_enable_opps(struct devfreq_cooling_device *dfc,
> > - unsigned long cdev_state)
> > -{
> > - int i;
> > - struct device *dev = dfc->devfreq->dev.parent;
> > -
> > - for (i = 0; i < dfc->freq_table_size; i++) {
> > - struct dev_pm_opp *opp;
> > - int ret = 0;
> > - unsigned int freq = dfc->freq_table[i];
> > - bool want_enable = i >= cdev_state ? true : false;
> > -
> > - opp = dev_pm_opp_find_freq_exact(dev, freq, !want_enable);
> > -
> > - if (PTR_ERR(opp) == -ERANGE)
> > - continue;
> > - else if (IS_ERR(opp))
> > - return PTR_ERR(opp);
> > -
> > - dev_pm_opp_put(opp);
> > -
> > - if (want_enable)
> > - ret = dev_pm_opp_enable(dev, freq);
> > - else
> > - ret = dev_pm_opp_disable(dev, freq);
> > -
> > - if (ret)
> > - return ret;
> > - }
> > -
> > - return 0;
> > -}
> > -
> > static int devfreq_cooling_get_max_state(struct thermal_cooling_device *cdev,
> > unsigned long *state)
> > {
> > @@ -134,7 +96,7 @@ static int devfreq_cooling_set_cur_state(struct thermal_cooling_device *cdev,
> > struct devfreq_cooling_device *dfc = cdev->devdata;
> > struct devfreq *df = dfc->devfreq;
> > struct device *dev = df->dev.parent;
> > - int ret;
> > + unsigned long freq;
> >
> > if (state == dfc->cooling_state)
> > return 0;
> > @@ -144,9 +106,10 @@ static int devfreq_cooling_set_cur_state(struct thermal_cooling_device *cdev,
> > if (state >= dfc->freq_table_size)
> > return -EINVAL;
> >
> > - ret = partition_enable_opps(dfc, state);
> > - if (ret)
> > - return ret;
> > + freq = dfc->freq_table[state];
> > +
> > + dev_pm_qos_update_request(&dfc->req_max_freq,
> > + DIV_ROUND_UP(freq, HZ_PER_KHZ));
> >
> > dfc->cooling_state = state;
> >
> > @@ -529,6 +492,12 @@ of_devfreq_cooling_register_power(struct device_node *np, struct devfreq *df,
> > if (err)
> > goto free_dfc;
> >
> > + err = dev_pm_qos_add_request(df->dev.parent, &dfc->req_max_freq,
> > + DEV_PM_QOS_MAX_FREQUENCY,
> > + PM_QOS_MAX_FREQUENCY_DEFAULT_VALUE);
> > + if (err < 0)
> > + goto remove_qos_req;
>
> Jump 'free_table' instead of 'remove_qos_req'.
ack
> > +
> > err = ida_simple_get(&devfreq_ida, 0, 0, GFP_KERNEL);
> > if (err < 0)
> > goto free_tables;
>
> Jump remove_qos_req.
ack
> > @@ -552,6 +521,10 @@ of_devfreq_cooling_register_power(struct device_node *np, struct devfreq *df,
> >
> > release_ida:
> > ida_simple_remove(&devfreq_ida, dfc->id);
> > +
> > +remove_qos_req:
> > + dev_pm_qos_remove_request(&dfc->req_max_freq);
> > +
> > free_tables:
> > kfree(dfc->power_table);
> > kfree(dfc->freq_table);
> > @@ -600,6 +573,7 @@ void devfreq_cooling_unregister(struct thermal_cooling_device *cdev)
> >
> > thermal_cooling_device_unregister(dfc->cdev);
> > ida_simple_remove(&devfreq_ida, dfc->id);
> > + dev_pm_qos_remove_request(&dfc->req_max_freq);
> > kfree(dfc->power_table);
> > kfree(dfc->freq_table);
next prev parent reply other threads:[~2020-01-14 18:51 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <CGME20200110174931epcas1p49c79567945e125829188174293d99850@epcas1p4.samsung.com>
2020-01-10 17:49 ` [PATCH 1/2] thermal: devfreq_cooling: Use PM QoS to set frequency limits Matthias Kaehlcke
2020-01-10 17:49 ` [PATCH 2/2] PM / devfreq: Use exclusively PM QoS to determine " Matthias Kaehlcke
2020-01-13 7:31 ` Chanwoo Choi
2020-01-14 16:08 ` Leonard Crestez
2020-01-14 17:35 ` Chanwoo Choi
2020-01-14 19:13 ` Matthias Kaehlcke
2020-01-13 7:25 ` [PATCH 1/2] thermal: devfreq_cooling: Use PM QoS to set " Chanwoo Choi
2020-01-14 18:51 ` Matthias Kaehlcke [this message]
2020-01-14 16:08 ` Leonard Crestez
2020-01-14 19:07 ` Matthias Kaehlcke
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200114185102.GJ89495@google.com \
--to=mka@chromium.org \
--cc=amit.kucheria@verdurent.com \
--cc=cw00.choi@samsung.com \
--cc=daniel.lezcano@linaro.org \
--cc=kyungmin.park@samsung.com \
--cc=leonard.crestez@nxp.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pm@vger.kernel.org \
--cc=myungjoo.ham@samsung.com \
--cc=rui.zhang@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).