[PATCH v4 0/3] Cleanup dtbs_check warnings for tsens

[PATCH v4 0/3] Cleanup dtbs_check warnings for tsens

[Amit Kucheria]

Make dtbs_check pass for tsens bits. I'm working on another series to
cleanup other DT warnings for QC platforms.

Changes since v3:
- Fixed up subject prefix
- Added acks.

Amit Kucheria (3):
  dt-bindings: thermal: tsens: Add entry for sc7180 tsens to binding
  arm64: dts: qcom: msm8916:: Add qcom,tsens-v0_1 to msm8916.dtsi
    compatible
  arm64: dts: qcom: msm8996:: Add qcom,tsens-v2 to msm8996.dtsi
    compatible

 Documentation/devicetree/bindings/thermal/qcom-tsens.yaml | 1 +
 arch/arm64/boot/dts/qcom/msm8916.dtsi                     | 2 +-
 arch/arm64/boot/dts/qcom/msm8996.dtsi                     | 4 ++--
 3 files changed, 4 insertions(+), 3 deletions(-)

-- 
2.20.1

[PATCH v4 1/3] dt-bindings: thermal: tsens: Add entry for sc7180 tsens to binding

[Amit Kucheria]

The qcom-tsens binding requires a SoC-specific and a TSENS
family-specific binding to be specified in the compatible string.

Since qcom,sc7180-tsens is not listed in the YAML binding, we see the
following warnings in 'make dtbs_check'. Fix them.

builds/arch/arm64/boot/dts/qcom/sc7180-idp.dt.yaml:
thermal-sensor@c263000: compatible: ['qcom,sc7180-tsens',
'qcom,tsens-v2'] is not valid under any of the given schemas (Possible
causes of the failure):
builds/arch/arm64/boot/dts/qcom/sc7180-idp.dt.yaml:
thermal-sensor@c263000: compatible:0: 'qcom,sc7180-tsens' is not one of
['qcom,msm8916-tsens', 'qcom,msm8974-tsens']
builds/arch/arm64/boot/dts/qcom/sc7180-idp.dt.yaml:
thermal-sensor@c263000: compatible:0: 'qcom,sc7180-tsens' is not one of
['qcom,msm8976-tsens', 'qcom,qcs404-tsens']
builds/arch/arm64/boot/dts/qcom/sc7180-idp.dt.yaml:
thermal-sensor@c263000: compatible:0: 'qcom,sc7180-tsens' is not one of
['qcom,msm8996-tsens', 'qcom,msm8998-tsens', 'qcom,sdm845-tsens']
builds/arch/arm64/boot/dts/qcom/sc7180-idp.dt.yaml:
thermal-sensor@c263000: compatible:1: 'qcom,tsens-v0_1' was expected
builds/arch/arm64/boot/dts/qcom/sc7180-idp.dt.yaml:
thermal-sensor@c263000: compatible:1: 'qcom,tsens-v1' was expected

builds/arch/arm64/boot/dts/qcom/sc7180-idp.dt.yaml:
thermal-sensor@c265000: compatible: ['qcom,sc7180-tsens',
'qcom,tsens-v2'] is not valid under any of the given schemas (Possible
causes of the failure):
builds/arch/arm64/boot/dts/qcom/sc7180-idp.dt.yaml:
thermal-sensor@c265000: compatible:0: 'qcom,sc7180-tsens' is not one of
['qcom,msm8916-tsens', 'qcom,msm8974-tsens']
builds/arch/arm64/boot/dts/qcom/sc7180-idp.dt.yaml:
thermal-sensor@c265000: compatible:0: 'qcom,sc7180-tsens' is not one of
['qcom,msm8976-tsens', 'qcom,qcs404-tsens']
builds/arch/arm64/boot/dts/qcom/sc7180-idp.dt.yaml:
thermal-sensor@c265000: compatible:0: 'qcom,sc7180-tsens' is not one of
['qcom,msm8996-tsens', 'qcom,msm8998-tsens', 'qcom,sdm845-tsens']
builds/arch/arm64/boot/dts/qcom/sc7180-idp.dt.yaml:
thermal-sensor@c265000: compatible:1: 'qcom,tsens-v0_1' was expected
builds/arch/arm64/boot/dts/qcom/sc7180-idp.dt.yaml:
thermal-sensor@c265000: compatible:1: 'qcom,tsens-v1' was expected

Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org>
Reviewed-by: Vinod Koul <vkoul@kernel.org>
---
 Documentation/devicetree/bindings/thermal/qcom-tsens.yaml | 1 +
 1 file changed, 1 insertion(+)

diff --git a/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml b/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml
index eef13b9446a8..13e294328932 100644
--- a/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml
+++ b/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml
@@ -39,6 +39,7 @@ properties:
               - qcom,msm8996-tsens
               - qcom,msm8998-tsens
               - qcom,sdm845-tsens
+              - qcom,sc7180-tsens
           - const: qcom,tsens-v2
 
   reg:
-- 
2.20.1

Re: [PATCH v4 1/3] dt-bindings: thermal: tsens: Add entry for sc7180 tsens to binding

[Rob Herring]

On Fri, 28 Feb 2020 12:02:40 +0530, Amit Kucheria wrote:
> The qcom-tsens binding requires a SoC-specific and a TSENS
> family-specific binding to be specified in the compatible string.
> 
> Since qcom,sc7180-tsens is not listed in the YAML binding, we see the
> following warnings in 'make dtbs_check'. Fix them.
> 
> builds/arch/arm64/boot/dts/qcom/sc7180-idp.dt.yaml:
> thermal-sensor@c263000: compatible: ['qcom,sc7180-tsens',
> 'qcom,tsens-v2'] is not valid under any of the given schemas (Possible
> causes of the failure):
> builds/arch/arm64/boot/dts/qcom/sc7180-idp.dt.yaml:
> thermal-sensor@c263000: compatible:0: 'qcom,sc7180-tsens' is not one of
> ['qcom,msm8916-tsens', 'qcom,msm8974-tsens']
> builds/arch/arm64/boot/dts/qcom/sc7180-idp.dt.yaml:
> thermal-sensor@c263000: compatible:0: 'qcom,sc7180-tsens' is not one of
> ['qcom,msm8976-tsens', 'qcom,qcs404-tsens']
> builds/arch/arm64/boot/dts/qcom/sc7180-idp.dt.yaml:
> thermal-sensor@c263000: compatible:0: 'qcom,sc7180-tsens' is not one of
> ['qcom,msm8996-tsens', 'qcom,msm8998-tsens', 'qcom,sdm845-tsens']
> builds/arch/arm64/boot/dts/qcom/sc7180-idp.dt.yaml:
> thermal-sensor@c263000: compatible:1: 'qcom,tsens-v0_1' was expected
> builds/arch/arm64/boot/dts/qcom/sc7180-idp.dt.yaml:
> thermal-sensor@c263000: compatible:1: 'qcom,tsens-v1' was expected
> 
> builds/arch/arm64/boot/dts/qcom/sc7180-idp.dt.yaml:
> thermal-sensor@c265000: compatible: ['qcom,sc7180-tsens',
> 'qcom,tsens-v2'] is not valid under any of the given schemas (Possible
> causes of the failure):
> builds/arch/arm64/boot/dts/qcom/sc7180-idp.dt.yaml:
> thermal-sensor@c265000: compatible:0: 'qcom,sc7180-tsens' is not one of
> ['qcom,msm8916-tsens', 'qcom,msm8974-tsens']
> builds/arch/arm64/boot/dts/qcom/sc7180-idp.dt.yaml:
> thermal-sensor@c265000: compatible:0: 'qcom,sc7180-tsens' is not one of
> ['qcom,msm8976-tsens', 'qcom,qcs404-tsens']
> builds/arch/arm64/boot/dts/qcom/sc7180-idp.dt.yaml:
> thermal-sensor@c265000: compatible:0: 'qcom,sc7180-tsens' is not one of
> ['qcom,msm8996-tsens', 'qcom,msm8998-tsens', 'qcom,sdm845-tsens']
> builds/arch/arm64/boot/dts/qcom/sc7180-idp.dt.yaml:
> thermal-sensor@c265000: compatible:1: 'qcom,tsens-v0_1' was expected
> builds/arch/arm64/boot/dts/qcom/sc7180-idp.dt.yaml:
> thermal-sensor@c265000: compatible:1: 'qcom,tsens-v1' was expected
> 
> Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org>
> Reviewed-by: Vinod Koul <vkoul@kernel.org>
> ---
>  Documentation/devicetree/bindings/thermal/qcom-tsens.yaml | 1 +
>  1 file changed, 1 insertion(+)
> 

Acked-by: Rob Herring <robh@kernel.org>

Re: [PATCH v4 1/3] dt-bindings: thermal: tsens: Add entry for sc7180 tsens to binding

[Daniel Lezcano]

On 28/02/2020 07:32, Amit Kucheria wrote:

[ ... ]

> diff --git a/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml b/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml
> index eef13b9446a8..13e294328932 100644
> --- a/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml
> +++ b/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml
> @@ -39,6 +39,7 @@ properties:
>                - qcom,msm8996-tsens
>                - qcom,msm8998-tsens
>                - qcom,sdm845-tsens
> +              - qcom,sc7180-tsens

This change is already done by

https://patchwork.kernel.org/patch/11319259/

I've applied it.

-- 
 <http://www.linaro.org/> Linaro.org │ Open source software for ARM SoCs

Follow Linaro:  <http://www.facebook.com/pages/Linaro> Facebook |
<http://twitter.com/#!/linaroorg> Twitter |
<http://www.linaro.org/linaro-blog/> Blog

Re: [PATCH v4 1/3] dt-bindings: thermal: tsens: Add entry for sc7180 tsens to binding

[Amit Kucheria]

On Tue, Mar 3, 2020 at 1:35 PM Daniel Lezcano <daniel.lezcano@linaro.org> wrote:
>
> On 28/02/2020 07:32, Amit Kucheria wrote:
>
> [ ... ]
>
> > diff --git a/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml b/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml
> > index eef13b9446a8..13e294328932 100644
> > --- a/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml
> > +++ b/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml
> > @@ -39,6 +39,7 @@ properties:
> >                - qcom,msm8996-tsens
> >                - qcom,msm8998-tsens
> >                - qcom,sdm845-tsens
> > +              - qcom,sc7180-tsens
>
> This change is already done by
>
> https://patchwork.kernel.org/patch/11319259/
>
> I've applied it.

Good catch! I'd forgotten I'd even reviewed it when I saw all these
warnings with dtbs_check :-)

Re: [PATCH v4 0/3] Cleanup dtbs_check warnings for tsens

[Bjorn Andersson]

On Thu 27 Feb 22:32 PST 2020, Amit Kucheria wrote:

> Make dtbs_check pass for tsens bits. I'm working on another series to
> cleanup other DT warnings for QC platforms.
> 

Thanks for the fast respin, patch 2 and 3 applied.

> Changes since v3:
> - Fixed up subject prefix
> - Added acks.
> 
> Amit Kucheria (3):
>   dt-bindings: thermal: tsens: Add entry for sc7180 tsens to binding
>   arm64: dts: qcom: msm8916:: Add qcom,tsens-v0_1 to msm8916.dtsi
>     compatible
>   arm64: dts: qcom: msm8996:: Add qcom,tsens-v2 to msm8996.dtsi
>     compatible
> 
>  Documentation/devicetree/bindings/thermal/qcom-tsens.yaml | 1 +
>  arch/arm64/boot/dts/qcom/msm8916.dtsi                     | 2 +-
>  arch/arm64/boot/dts/qcom/msm8996.dtsi                     | 4 ++--
>  3 files changed, 4 insertions(+), 3 deletions(-)
> 
> -- 
> 2.20.1
>