[PATCH AUTOSEL 5.4 09/84] power: supply: bq27xxx_battery: Silence deferred-probe error

[PATCH AUTOSEL 5.4 09/84] power: supply: bq27xxx_battery: Silence deferred-probe error

[Sasha Levin]

From: Dmitry Osipenko <digetx@gmail.com>

[ Upstream commit 583b53ece0b0268c542a1eafadb62e3d4b0aab8c ]

The driver fails to probe with -EPROBE_DEFER if battery's power supply
(charger driver) isn't ready yet and this results in a bit noisy error
message in KMSG during kernel's boot up. Let's silence the harmless
error message.

Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Reviewed-by: Andrew F. Davis <afd@ti.com>
Reviewed-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/power/supply/bq27xxx_battery.c | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

diff --git a/drivers/power/supply/bq27xxx_battery.c b/drivers/power/supply/bq27xxx_battery.c
index 195c18c2f426e..664e50103eaaf 100644
--- a/drivers/power/supply/bq27xxx_battery.c
+++ b/drivers/power/supply/bq27xxx_battery.c
@@ -1885,7 +1885,10 @@ int bq27xxx_battery_setup(struct bq27xxx_device_info *di)
 
 	di->bat = power_supply_register_no_ws(di->dev, psy_desc, &psy_cfg);
 	if (IS_ERR(di->bat)) {
-		dev_err(di->dev, "failed to register battery\n");
+		if (PTR_ERR(di->bat) == -EPROBE_DEFER)
+			dev_dbg(di->dev, "failed to register battery, deferring probe\n");
+		else
+			dev_err(di->dev, "failed to register battery\n");
 		return PTR_ERR(di->bat);
 	}
 
-- 
2.20.1

[PATCH AUTOSEL 5.4 55/84] drm/nouveau: workaround runpm fail by disabling PCI power management on certain intel bridges

[Sasha Levin]

From: Karol Herbst <kherbst@redhat.com>

[ Upstream commit 434fdb51513bf3057ac144d152e6f2f2b509e857 ]

Fixes the infamous 'runtime PM' bug many users are facing on Laptops with
Nvidia Pascal GPUs by skipping said PCI power state changes on the GPU.

Depending on the used kernel there might be messages like those in demsg:

"nouveau 0000:01:00.0: Refused to change power state, currently in D3"
"nouveau 0000:01:00.0: can't change power state from D3cold to D0 (config
space inaccessible)"
followed by backtraces of kernel crashes or timeouts within nouveau.

It's still unkown why this issue exists, but this is a reliable workaround
and solves a very annoying issue for user having to choose between a
crashing kernel or higher power consumption of their Laptops.

Signed-off-by: Karol Herbst <kherbst@redhat.com>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Lyude Paul <lyude@redhat.com>
Cc: Rafael J. Wysocki <rjw@rjwysocki.net>
Cc: Mika Westerberg <mika.westerberg@intel.com>
Cc: linux-pci@vger.kernel.org
Cc: linux-pm@vger.kernel.org
Cc: dri-devel@lists.freedesktop.org
Cc: nouveau@lists.freedesktop.org
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=205623
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/nouveau/nouveau_drm.c | 63 +++++++++++++++++++++++++++
 drivers/gpu/drm/nouveau/nouveau_drv.h |  2 +
 2 files changed, 65 insertions(+)

diff --git a/drivers/gpu/drm/nouveau/nouveau_drm.c b/drivers/gpu/drm/nouveau/nouveau_drm.c
index 2cd83849600f3..b1beed40e746a 100644
--- a/drivers/gpu/drm/nouveau/nouveau_drm.c
+++ b/drivers/gpu/drm/nouveau/nouveau_drm.c
@@ -618,6 +618,64 @@ nouveau_drm_device_fini(struct drm_device *dev)
 	kfree(drm);
 }
 
+/*
+ * On some Intel PCIe bridge controllers doing a
+ * D0 -> D3hot -> D3cold -> D0 sequence causes Nvidia GPUs to not reappear.
+ * Skipping the intermediate D3hot step seems to make it work again. This is
+ * probably caused by not meeting the expectation the involved AML code has
+ * when the GPU is put into D3hot state before invoking it.
+ *
+ * This leads to various manifestations of this issue:
+ *  - AML code execution to power on the GPU hits an infinite loop (as the
+ *    code waits on device memory to change).
+ *  - kernel crashes, as all PCI reads return -1, which most code isn't able
+ *    to handle well enough.
+ *
+ * In all cases dmesg will contain at least one line like this:
+ * 'nouveau 0000:01:00.0: Refused to change power state, currently in D3'
+ * followed by a lot of nouveau timeouts.
+ *
+ * In the \_SB.PCI0.PEG0.PG00._OFF code deeper down writes bit 0x80 to the not
+ * documented PCI config space register 0x248 of the Intel PCIe bridge
+ * controller (0x1901) in order to change the state of the PCIe link between
+ * the PCIe port and the GPU. There are alternative code paths using other
+ * registers, which seem to work fine (executed pre Windows 8):
+ *  - 0xbc bit 0x20 (publicly available documentation claims 'reserved')
+ *  - 0xb0 bit 0x10 (link disable)
+ * Changing the conditions inside the firmware by poking into the relevant
+ * addresses does resolve the issue, but it seemed to be ACPI private memory
+ * and not any device accessible memory at all, so there is no portable way of
+ * changing the conditions.
+ * On a XPS 9560 that means bits [0,3] on \CPEX need to be cleared.
+ *
+ * The only systems where this behavior can be seen are hybrid graphics laptops
+ * with a secondary Nvidia Maxwell, Pascal or Turing GPU. It's unclear whether
+ * this issue only occurs in combination with listed Intel PCIe bridge
+ * controllers and the mentioned GPUs or other devices as well.
+ *
+ * documentation on the PCIe bridge controller can be found in the
+ * "7th Generation Intel® Processor Families for H Platforms Datasheet Volume 2"
+ * Section "12 PCI Express* Controller (x16) Registers"
+ */
+
+static void quirk_broken_nv_runpm(struct pci_dev *pdev)
+{
+	struct drm_device *dev = pci_get_drvdata(pdev);
+	struct nouveau_drm *drm = nouveau_drm(dev);
+	struct pci_dev *bridge = pci_upstream_bridge(pdev);
+
+	if (!bridge || bridge->vendor != PCI_VENDOR_ID_INTEL)
+		return;
+
+	switch (bridge->device) {
+	case 0x1901:
+		drm->old_pm_cap = pdev->pm_cap;
+		pdev->pm_cap = 0;
+		NV_INFO(drm, "Disabling PCI power management to avoid bug\n");
+		break;
+	}
+}
+
 static int nouveau_drm_probe(struct pci_dev *pdev,
 			     const struct pci_device_id *pent)
 {
@@ -699,6 +757,7 @@ static int nouveau_drm_probe(struct pci_dev *pdev,
 	if (ret)
 		goto fail_drm_dev_init;
 
+	quirk_broken_nv_runpm(pdev);
 	return 0;
 
 fail_drm_dev_init:
@@ -736,7 +795,11 @@ static void
 nouveau_drm_remove(struct pci_dev *pdev)
 {
 	struct drm_device *dev = pci_get_drvdata(pdev);
+	struct nouveau_drm *drm = nouveau_drm(dev);
 
+	/* revert our workaround */
+	if (drm->old_pm_cap)
+		pdev->pm_cap = drm->old_pm_cap;
 	nouveau_drm_device_remove(dev);
 }
 
diff --git a/drivers/gpu/drm/nouveau/nouveau_drv.h b/drivers/gpu/drm/nouveau/nouveau_drv.h
index 70f34cacc552c..8104e3806499d 100644
--- a/drivers/gpu/drm/nouveau/nouveau_drv.h
+++ b/drivers/gpu/drm/nouveau/nouveau_drv.h
@@ -138,6 +138,8 @@ struct nouveau_drm {
 
 	struct list_head clients;
 
+	u8 old_pm_cap;
+
 	struct {
 		struct agp_bridge_data *bridge;
 		u32 base;
-- 
2.20.1

[PATCH AUTOSEL 5.4 58/84] x86: ACPI: fix CPU hotplug deadlock

[Sasha Levin]

From: Qian Cai <cai@lca.pw>

[ Upstream commit 696ac2e3bf267f5a2b2ed7d34e64131f2287d0ad ]

Similar to commit 0266d81e9bf5 ("acpi/processor: Prevent cpu hotplug
deadlock") except this is for acpi_processor_ffh_cstate_probe():

"The problem is that the work is scheduled on the current CPU from the
hotplug thread associated with that CPU.

It's not required to invoke these functions via the workqueue because
the hotplug thread runs on the target CPU already.

Check whether current is a per cpu thread pinned on the target CPU and
invoke the function directly to avoid the workqueue."

 WARNING: possible circular locking dependency detected
 ------------------------------------------------------
 cpuhp/1/15 is trying to acquire lock:
 ffffc90003447a28 ((work_completion)(&wfc.work)){+.+.}-{0:0}, at: __flush_work+0x4c6/0x630

 but task is already holding lock:
 ffffffffafa1c0e8 (cpuidle_lock){+.+.}-{3:3}, at: cpuidle_pause_and_lock+0x17/0x20

 which lock already depends on the new lock.

 the existing dependency chain (in reverse order) is:

 -> #1 (cpu_hotplug_lock){++++}-{0:0}:
 cpus_read_lock+0x3e/0xc0
 irq_calc_affinity_vectors+0x5f/0x91
 __pci_enable_msix_range+0x10f/0x9a0
 pci_alloc_irq_vectors_affinity+0x13e/0x1f0
 pci_alloc_irq_vectors_affinity at drivers/pci/msi.c:1208
 pqi_ctrl_init+0x72f/0x1618 [smartpqi]
 pqi_pci_probe.cold.63+0x882/0x892 [smartpqi]
 local_pci_probe+0x7a/0xc0
 work_for_cpu_fn+0x2e/0x50
 process_one_work+0x57e/0xb90
 worker_thread+0x363/0x5b0
 kthread+0x1f4/0x220
 ret_from_fork+0x27/0x50

 -> #0 ((work_completion)(&wfc.work)){+.+.}-{0:0}:
 __lock_acquire+0x2244/0x32a0
 lock_acquire+0x1a2/0x680
 __flush_work+0x4e6/0x630
 work_on_cpu+0x114/0x160
 acpi_processor_ffh_cstate_probe+0x129/0x250
 acpi_processor_evaluate_cst+0x4c8/0x580
 acpi_processor_get_power_info+0x86/0x740
 acpi_processor_hotplug+0xc3/0x140
 acpi_soft_cpu_online+0x102/0x1d0
 cpuhp_invoke_callback+0x197/0x1120
 cpuhp_thread_fun+0x252/0x2f0
 smpboot_thread_fn+0x255/0x440
 kthread+0x1f4/0x220
 ret_from_fork+0x27/0x50

 other info that might help us debug this:

 Chain exists of:
 (work_completion)(&wfc.work) --> cpuhp_state-up --> cpuidle_lock

 Possible unsafe locking scenario:

 CPU0                    CPU1
 ----                    ----
 lock(cpuidle_lock);
                         lock(cpuhp_state-up);
                         lock(cpuidle_lock);
 lock((work_completion)(&wfc.work));

 *** DEADLOCK ***

 3 locks held by cpuhp/1/15:
 #0: ffffffffaf51ab10 (cpu_hotplug_lock){++++}-{0:0}, at: cpuhp_thread_fun+0x69/0x2f0
 #1: ffffffffaf51ad40 (cpuhp_state-up){+.+.}-{0:0}, at: cpuhp_thread_fun+0x69/0x2f0
 #2: ffffffffafa1c0e8 (cpuidle_lock){+.+.}-{3:3}, at: cpuidle_pause_and_lock+0x17/0x20

 Call Trace:
 dump_stack+0xa0/0xea
 print_circular_bug.cold.52+0x147/0x14c
 check_noncircular+0x295/0x2d0
 __lock_acquire+0x2244/0x32a0
 lock_acquire+0x1a2/0x680
 __flush_work+0x4e6/0x630
 work_on_cpu+0x114/0x160
 acpi_processor_ffh_cstate_probe+0x129/0x250
 acpi_processor_evaluate_cst+0x4c8/0x580
 acpi_processor_get_power_info+0x86/0x740
 acpi_processor_hotplug+0xc3/0x140
 acpi_soft_cpu_online+0x102/0x1d0
 cpuhp_invoke_callback+0x197/0x1120
 cpuhp_thread_fun+0x252/0x2f0
 smpboot_thread_fn+0x255/0x440
 kthread+0x1f4/0x220
 ret_from_fork+0x27/0x50

Signed-off-by: Qian Cai <cai@lca.pw>
Tested-by: Borislav Petkov <bp@suse.de>
[ rjw: Subject ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/x86/kernel/acpi/cstate.c       | 3 ++-
 drivers/acpi/processor_throttling.c | 7 -------
 include/acpi/processor.h            | 8 ++++++++
 3 files changed, 10 insertions(+), 8 deletions(-)

diff --git a/arch/x86/kernel/acpi/cstate.c b/arch/x86/kernel/acpi/cstate.c
index caf2edccbad2e..49ae4e1ac9cd8 100644
--- a/arch/x86/kernel/acpi/cstate.c
+++ b/arch/x86/kernel/acpi/cstate.c
@@ -161,7 +161,8 @@ int acpi_processor_ffh_cstate_probe(unsigned int cpu,
 
 	/* Make sure we are running on right CPU */
 
-	retval = work_on_cpu(cpu, acpi_processor_ffh_cstate_probe_cpu, cx);
+	retval = call_on_cpu(cpu, acpi_processor_ffh_cstate_probe_cpu, cx,
+			     false);
 	if (retval == 0) {
 		/* Use the hint in CST */
 		percpu_entry->states[cx->index].eax = cx->address;
diff --git a/drivers/acpi/processor_throttling.c b/drivers/acpi/processor_throttling.c
index 532a1ae3595a7..a0bd56ece3ff5 100644
--- a/drivers/acpi/processor_throttling.c
+++ b/drivers/acpi/processor_throttling.c
@@ -897,13 +897,6 @@ static long __acpi_processor_get_throttling(void *data)
 	return pr->throttling.acpi_processor_get_throttling(pr);
 }
 
-static int call_on_cpu(int cpu, long (*fn)(void *), void *arg, bool direct)
-{
-	if (direct || (is_percpu_thread() && cpu == smp_processor_id()))
-		return fn(arg);
-	return work_on_cpu(cpu, fn, arg);
-}
-
 static int acpi_processor_get_throttling(struct acpi_processor *pr)
 {
 	if (!pr)
diff --git a/include/acpi/processor.h b/include/acpi/processor.h
index 47805172e73d8..683e124ad517d 100644
--- a/include/acpi/processor.h
+++ b/include/acpi/processor.h
@@ -297,6 +297,14 @@ static inline void acpi_processor_ffh_cstate_enter(struct acpi_processor_cx
 }
 #endif
 
+static inline int call_on_cpu(int cpu, long (*fn)(void *), void *arg,
+			      bool direct)
+{
+	if (direct || (is_percpu_thread() && cpu == smp_processor_id()))
+		return fn(arg);
+	return work_on_cpu(cpu, fn, arg);
+}
+
 /* in processor_perflib.c */
 
 #ifdef CONFIG_CPU_FREQ
-- 
2.20.1

[PATCH AUTOSEL 5.4 79/84] power: supply: axp288_fuel_gauge: Broaden vendor check for Intel Compute Sticks.

[Sasha Levin]

From: Jeffery Miller <jmiller@neverware.com>

[ Upstream commit e42fe5b29ac07210297e75f36deefe54edbdbf80 ]

The Intel Compute Stick `STK1A32SC` can have a system vendor of
"Intel(R) Client Systems".
Broaden the Intel Compute Stick DMI checks so that they match "Intel
Corporation" as well as "Intel(R) Client Systems".

This fixes an issue where the STK1A32SC compute sticks were still
exposing a battery with the existing blacklist entry.

Signed-off-by: Jeffery Miller <jmiller@neverware.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/power/supply/axp288_fuel_gauge.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/power/supply/axp288_fuel_gauge.c b/drivers/power/supply/axp288_fuel_gauge.c
index e1bc4e6e6f30e..f40fa0e63b6e5 100644
--- a/drivers/power/supply/axp288_fuel_gauge.c
+++ b/drivers/power/supply/axp288_fuel_gauge.c
@@ -706,14 +706,14 @@ static const struct dmi_system_id axp288_fuel_gauge_blacklist[] = {
 	{
 		/* Intel Cherry Trail Compute Stick, Windows version */
 		.matches = {
-			DMI_MATCH(DMI_SYS_VENDOR, "Intel Corporation"),
+			DMI_MATCH(DMI_SYS_VENDOR, "Intel"),
 			DMI_MATCH(DMI_PRODUCT_NAME, "STK1AW32SC"),
 		},
 	},
 	{
 		/* Intel Cherry Trail Compute Stick, version without an OS */
 		.matches = {
-			DMI_MATCH(DMI_SYS_VENDOR, "Intel Corporation"),
+			DMI_MATCH(DMI_SYS_VENDOR, "Intel"),
 			DMI_MATCH(DMI_PRODUCT_NAME, "STK1A32SC"),
 		},
 	},
-- 
2.20.1