linux-pm.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Alexandre Belloni <alexandre.belloni@bootlin.com>
To: Claudiu Beznea <claudiu.beznea@microchip.com>
Cc: robh+dt@kernel.org, mark.rutland@arm.com,
	nicolas.ferre@microchip.com, ludovic.desroches@microchip.com,
	sre@kernel.org, devicetree@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org,
	linux-kernel@vger.kernel.org, linux-pm@vger.kernel.org
Subject: Re: [PATCH 3/3] power: reset: at91-sama5d2_shdwc: add support for sama7g5
Date: Wed, 16 Dec 2020 14:45:32 +0100	[thread overview]
Message-ID: <20201216134532.GH2814589@piout.net> (raw)
In-Reply-To: <1608123453-1423-4-git-send-email-claudiu.beznea@microchip.com>

On 16/12/2020 14:57:33+0200, Claudiu Beznea wrote:
> Add support for SAMA7G5 by adding proper struct reg_config structure
> and since SAMA7G5 is not currently on LPDDR setups the commit also
> avoid the mapping of DDR controller.
> 

Honestly, I wouldn't leave the LPDDR part out because there is no
guarantee anyone will think about it when they have a design with LPDDR
and as a consequence, their device will behave properly but will be
very short lived.

> Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
> ---
>  drivers/power/reset/at91-sama5d2_shdwc.c | 72 ++++++++++++++++++++++++--------
>  1 file changed, 54 insertions(+), 18 deletions(-)
> 
> diff --git a/drivers/power/reset/at91-sama5d2_shdwc.c b/drivers/power/reset/at91-sama5d2_shdwc.c
> index 3996167f676f..a3342c8c3728 100644
> --- a/drivers/power/reset/at91-sama5d2_shdwc.c
> +++ b/drivers/power/reset/at91-sama5d2_shdwc.c
> @@ -78,9 +78,15 @@ struct pmc_reg_config {
>  	u8 mckr;
>  };
>  
> +struct ddrc_reg_config {
> +	u32 type_offset;
> +	u32 type_mask;
> +};
> +
>  struct reg_config {
>  	struct shdwc_reg_config shdwc;
>  	struct pmc_reg_config pmc;
> +	struct ddrc_reg_config ddrc;
>  };
>  
>  struct shdwc {
> @@ -262,6 +268,10 @@ static const struct reg_config sama5d2_reg_config = {
>  	.pmc = {
>  		.mckr		= 0x30,
>  	},
> +	.ddrc = {
> +		.type_offset	= AT91_DDRSDRC_MDR,
> +		.type_mask	= AT91_DDRSDRC_MD
> +	},
>  };
>  
>  static const struct reg_config sam9x60_reg_config = {
> @@ -275,6 +285,23 @@ static const struct reg_config sam9x60_reg_config = {
>  	.pmc = {
>  		.mckr		= 0x28,
>  	},
> +	.ddrc = {
> +		.type_offset	= AT91_DDRSDRC_MDR,
> +		.type_mask	= AT91_DDRSDRC_MD
> +	},
> +};
> +
> +static const struct reg_config sama7g5_reg_config = {
> +	.shdwc = {
> +		.wkup_pin_input = 0,
> +		.mr_rtcwk_shift = 17,
> +		.mr_rttwk_shift = 16,
> +		.sr_rtcwk_shift = 5,
> +		.sr_rttwk_shift = 4,
> +	},
> +	.pmc = {
> +		.mckr		= 0x28,
> +	},
>  };
>  
>  static const struct of_device_id at91_shdwc_of_match[] = {
> @@ -285,6 +312,10 @@ static const struct of_device_id at91_shdwc_of_match[] = {
>  	{
>  		.compatible = "microchip,sam9x60-shdwc",
>  		.data = &sam9x60_reg_config,
> +	},
> +	{
> +		.compatible = "microchip,sama7g5-shdwc",
> +		.data = &sama7g5_reg_config,
>  	}, {
>  		/*sentinel*/
>  	}
> @@ -294,6 +325,7 @@ MODULE_DEVICE_TABLE(of, at91_shdwc_of_match);
>  static const struct of_device_id at91_pmc_ids[] = {
>  	{ .compatible = "atmel,sama5d2-pmc" },
>  	{ .compatible = "microchip,sam9x60-pmc" },
> +	{ .compatible = "microchip,sama7g5-pmc" },
>  	{ /* Sentinel. */ }
>  };
>  
> @@ -355,30 +387,34 @@ static int __init at91_shdwc_probe(struct platform_device *pdev)
>  		goto clk_disable;
>  	}
>  
> -	np = of_find_compatible_node(NULL, NULL, "atmel,sama5d3-ddramc");
> -	if (!np) {
> -		ret = -ENODEV;
> -		goto unmap;
> -	}
> +	if (at91_shdwc->rcfg->ddrc.type_mask) {
> +		np = of_find_compatible_node(NULL, NULL,
> +					     "atmel,sama5d3-ddramc");
> +		if (!np) {
> +			ret = -ENODEV;
> +			goto unmap;
> +		}
>  
> -	at91_shdwc->mpddrc_base = of_iomap(np, 0);
> -	of_node_put(np);
> +		at91_shdwc->mpddrc_base = of_iomap(np, 0);
> +		of_node_put(np);
>  
> -	if (!at91_shdwc->mpddrc_base) {
> -		ret = -ENOMEM;
> -		goto unmap;
> +		if (!at91_shdwc->mpddrc_base) {
> +			ret = -ENOMEM;
> +			goto unmap;
> +		}
> +
> +		ddr_type = readl(at91_shdwc->mpddrc_base +
> +				 at91_shdwc->rcfg->ddrc.type_offset) &
> +				 at91_shdwc->rcfg->ddrc.type_mask;
> +		if (ddr_type != AT91_DDRSDRC_MD_LPDDR2 &&
> +		    ddr_type != AT91_DDRSDRC_MD_LPDDR3) {
> +			iounmap(at91_shdwc->mpddrc_base);
> +			at91_shdwc->mpddrc_base = NULL;
> +		}
>  	}
>  
>  	pm_power_off = at91_poweroff;
>  
> -	ddr_type = readl(at91_shdwc->mpddrc_base + AT91_DDRSDRC_MDR) &
> -			 AT91_DDRSDRC_MD;
> -	if (ddr_type != AT91_DDRSDRC_MD_LPDDR2 &&
> -	    ddr_type != AT91_DDRSDRC_MD_LPDDR3) {
> -		iounmap(at91_shdwc->mpddrc_base);
> -		at91_shdwc->mpddrc_base = NULL;
> -	}
> -
>  	return 0;
>  
>  unmap:
> -- 
> 2.7.4
> 

-- 
Alexandre Belloni, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com

  reply	other threads:[~2020-12-16 13:46 UTC|newest]

Thread overview: 12+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-12-16 12:57 [PATCH 0/3] power: reset: at91-sama5d2_shdwc: add support for SAMA7G5 Claudiu Beznea
2020-12-16 12:57 ` [PATCH 1/3] power: reset: at91-sama5d2_shdwc: fix wkupdbc mask Claudiu Beznea
2020-12-16 13:40   ` Alexandre Belloni
2020-12-16 12:57 ` [PATCH 2/3] dt-bindings: atmel-sysreg: add microchip,sama7g5-shdwc Claudiu Beznea
2020-12-16 13:41   ` Alexandre Belloni
2020-12-21 19:37     ` Rob Herring
2020-12-21 19:37   ` Rob Herring
2020-12-16 12:57 ` [PATCH 3/3] power: reset: at91-sama5d2_shdwc: add support for sama7g5 Claudiu Beznea
2020-12-16 13:45   ` Alexandre Belloni [this message]
2020-12-16 14:11     ` Claudiu.Beznea
2020-12-16 14:12     ` Claudiu.Beznea
2021-01-16 13:58 ` [PATCH 0/3] power: reset: at91-sama5d2_shdwc: add support for SAMA7G5 Sebastian Reichel

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20201216134532.GH2814589@piout.net \
    --to=alexandre.belloni@bootlin.com \
    --cc=claudiu.beznea@microchip.com \
    --cc=devicetree@vger.kernel.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pm@vger.kernel.org \
    --cc=ludovic.desroches@microchip.com \
    --cc=mark.rutland@arm.com \
    --cc=nicolas.ferre@microchip.com \
    --cc=robh+dt@kernel.org \
    --cc=sre@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).