From: Hector Martin <marcan@marcan.st>
To: linux-arm-kernel@lists.infradead.org
Cc: Hector Martin <marcan@marcan.st>, Marc Zyngier <maz@kernel.org>,
Rob Herring <robh+dt@kernel.org>, Arnd Bergmann <arnd@kernel.org>,
Linus Walleij <linus.walleij@linaro.org>,
Alyssa Rosenzweig <alyssa@rosenzweig.io>,
Krzysztof Kozlowski <krzk@kernel.org>,
Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
Mark Kettenis <mark.kettenis@xs4all.nl>,
Philipp Zabel <p.zabel@pengutronix.de>,
"Rafael J. Wysocki" <rafael@kernel.org>,
Johan Hovold <johan@kernel.org>,
devicetree@vger.kernel.org, linux-pm@vger.kernel.org,
linux-kernel@vger.kernel.org, linux-samsung-soc@vger.kernel.org,
linux-serial@vger.kernel.org,
Mark Kettenis <kettenis@openbsd.org>
Subject: [PATCH v2 6/8] arm64: dts: apple: t8103: Add the UART PMGR tree
Date: Mon, 25 Oct 2021 23:47:16 +0900 [thread overview]
Message-ID: <20211025144718.157794-7-marcan@marcan.st> (raw)
In-Reply-To: <20211025144718.157794-1-marcan@marcan.st>
Note that the UART driver does not currently support runtime-pm, so this
effectively always keeps the UART0 device on. However, this does clockgate
all the other UARTs, as those are not currently instantiated.
Reviewed-by: Mark Kettenis <kettenis@openbsd.org>
Signed-off-by: Hector Martin <marcan@marcan.st>
---
arch/arm64/boot/dts/apple/t8103.dtsi | 116 +++++++++++++++++++++++++++
1 file changed, 116 insertions(+)
diff --git a/arch/arm64/boot/dts/apple/t8103.dtsi b/arch/arm64/boot/dts/apple/t8103.dtsi
index 9f60f9e48ea0..1d0fac1747c7 100644
--- a/arch/arm64/boot/dts/apple/t8103.dtsi
+++ b/arch/arm64/boot/dts/apple/t8103.dtsi
@@ -122,6 +122,7 @@ serial0: serial@235200000 {
*/
clocks = <&clkref>, <&clkref>;
clock-names = "uart", "clk_uart_baud0";
+ power-domains = <&ps_uart0>;
status = "disabled";
};
@@ -131,5 +132,120 @@ aic: interrupt-controller@23b100000 {
interrupt-controller;
reg = <0x2 0x3b100000 0x0 0x8000>;
};
+
+ pmgr: power-management@23b700000 {
+ compatible = "apple,t8103-pmgr", "apple,pmgr", "syscon", "simple-mfd";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ reg = <0x2 0x3b700000 0x0 0x14000>;
+
+ ps_sio_busif: power-controller@1c0 {
+ compatible = "apple,t8103-pmgr-pwrstate", "apple,pmgr-pwrstate";
+ reg = <0x1c0>;
+ #power-domain-cells = <0>;
+ #reset-cells = <0>;
+ label = "sio_busif";
+ };
+
+ ps_sio: power-controller@1c8 {
+ compatible = "apple,t8103-pmgr-pwrstate", "apple,pmgr-pwrstate";
+ reg = <0x1c8>;
+ #power-domain-cells = <0>;
+ #reset-cells = <0>;
+ label = "sio";
+ power-domains = <&ps_sio_busif>;
+ };
+
+ ps_uart_p: power-controller@220 {
+ compatible = "apple,t8103-pmgr-pwrstate", "apple,pmgr-pwrstate";
+ reg = <0x220>;
+ #power-domain-cells = <0>;
+ #reset-cells = <0>;
+ label = "uart_p";
+ power-domains = <&ps_sio>;
+ };
+
+ ps_uart0: power-controller@270 {
+ compatible = "apple,t8103-pmgr-pwrstate", "apple,pmgr-pwrstate";
+ reg = <0x270>;
+ #power-domain-cells = <0>;
+ #reset-cells = <0>;
+ label = "uart0";
+ power-domains = <&ps_uart_p>;
+ };
+
+ ps_uart1: power-controller@278 {
+ compatible = "apple,t8103-pmgr-pwrstate", "apple,pmgr-pwrstate";
+ reg = <0x278>;
+ #power-domain-cells = <0>;
+ #reset-cells = <0>;
+ label = "uart1";
+ power-domains = <&ps_uart_p>;
+ };
+
+ ps_uart2: power-controller@280 {
+ compatible = "apple,t8103-pmgr-pwrstate", "apple,pmgr-pwrstate";
+ reg = <0x280>;
+ #power-domain-cells = <0>;
+ #reset-cells = <0>;
+ label = "uart2";
+ power-domains = <&ps_uart_p>;
+ };
+
+ ps_uart3: power-controller@288 {
+ compatible = "apple,t8103-pmgr-pwrstate", "apple,pmgr-pwrstate";
+ reg = <0x288>;
+ #power-domain-cells = <0>;
+ #reset-cells = <0>;
+ label = "uart3";
+ power-domains = <&ps_uart_p>;
+ };
+
+ ps_uart4: power-controller@290 {
+ compatible = "apple,t8103-pmgr-pwrstate", "apple,pmgr-pwrstate";
+ reg = <0x290>;
+ #power-domain-cells = <0>;
+ #reset-cells = <0>;
+ label = "uart4";
+ power-domains = <&ps_uart_p>;
+ };
+
+ ps_uart5: power-controller@298 {
+ compatible = "apple,t8103-pmgr-pwrstate", "apple,pmgr-pwrstate";
+ reg = <0x298>;
+ #power-domain-cells = <0>;
+ #reset-cells = <0>;
+ label = "uart5";
+ power-domains = <&ps_uart_p>;
+ };
+
+ ps_uart6: power-controller@2a0 {
+ compatible = "apple,t8103-pmgr-pwrstate", "apple,pmgr-pwrstate";
+ reg = <0x2a0>;
+ #power-domain-cells = <0>;
+ #reset-cells = <0>;
+ label = "uart6";
+ power-domains = <&ps_uart_p>;
+ };
+
+ ps_uart7: power-controller@2a8 {
+ compatible = "apple,t8103-pmgr-pwrstate", "apple,pmgr-pwrstate";
+ reg = <0x2a8>;
+ #power-domain-cells = <0>;
+ #reset-cells = <0>;
+ label = "uart7";
+ power-domains = <&ps_uart_p>;
+ };
+
+ ps_uart8: power-controller@2b0 {
+ compatible = "apple,t8103-pmgr-pwrstate", "apple,pmgr-pwrstate";
+ reg = <0x2b0>;
+ #power-domain-cells = <0>;
+ #reset-cells = <0>;
+ label = "uart8";
+ power-domains = <&ps_uart_p>;
+ };
+ };
};
};
--
2.33.0
next prev parent reply other threads:[~2021-10-25 14:48 UTC|newest]
Thread overview: 18+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-10-25 14:47 [PATCH v2 0/8] Apple SoC PMGR device power states driver Hector Martin
2021-10-25 14:47 ` [PATCH v2 1/8] MAINTAINERS: Add PMGR power state files to ARM/APPLE MACHINE Hector Martin
2021-10-25 14:47 ` [PATCH v2 2/8] dt-bindings: arm: apple: Add apple,pmgr binding Hector Martin
2021-10-25 18:16 ` Rob Herring
2021-10-25 18:21 ` Hector Martin
2021-10-26 18:25 ` Rob Herring
2021-10-27 3:38 ` Hector Martin
2021-10-27 14:43 ` Rob Herring
2021-10-27 14:51 ` Krzysztof Kozlowski
2021-10-29 7:09 ` Hector Martin
2021-10-25 14:47 ` [PATCH v2 3/8] dt-bindings: power: Add apple,pmgr-pwrstate binding Hector Martin
2021-10-25 18:16 ` Rob Herring
2021-10-26 18:27 ` Rob Herring
2021-10-25 14:47 ` [PATCH v2 4/8] soc: apple: Add driver for Apple PMGR power state controls Hector Martin
2021-10-25 14:47 ` [PATCH v2 5/8] arm64: dts: apple: t8103: Rename clk24 to clkref Hector Martin
2021-10-25 14:47 ` Hector Martin [this message]
2021-10-25 14:47 ` [PATCH v2 7/8] tty: serial: samsung_tty: Support runtime PM Hector Martin
2021-10-25 14:47 ` [PATCH v2 8/8] arm64: dts: apple: t8103: Add UART2 Hector Martin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20211025144718.157794-7-marcan@marcan.st \
--to=marcan@marcan.st \
--cc=alyssa@rosenzweig.io \
--cc=arnd@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=gregkh@linuxfoundation.org \
--cc=johan@kernel.org \
--cc=kettenis@openbsd.org \
--cc=krzk@kernel.org \
--cc=linus.walleij@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pm@vger.kernel.org \
--cc=linux-samsung-soc@vger.kernel.org \
--cc=linux-serial@vger.kernel.org \
--cc=mark.kettenis@xs4all.nl \
--cc=maz@kernel.org \
--cc=p.zabel@pengutronix.de \
--cc=rafael@kernel.org \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox