From: Angus Ainslie <angus@akkea.ca>
To: Sebastian Reichel <sre@kernel.org>
Cc: linux-pm@vger.kernel.org, linux-kernel@vger.kernel.org,
kernel@puri.sm, Angus Ainslie <angus@akkea.ca>
Subject: [PATCH] power: bq25890: add POWER_SUPPLY_PROP_TEMP
Date: Mon, 15 Nov 2021 10:02:54 -0800 [thread overview]
Message-ID: <20211115180253.124271-1-angus@akkea.ca> (raw)
Add the POWER_SUPPLY_PROP_TEMP and a NTC 10K percent VREGN to degrees LUT.
Sorry I didn't realize this patch was not upstream yet and was just in our
tree. It should have been applied before:
https://lore.kernel.org/linux-pm/20211110002440.71404-1-angus@akkea.ca/
Signed-off-by: Angus Ainslie <angus@akkea.ca>
---
drivers/power/supply/bq25890_charger.c | 36 +++++++++++++++++++++++++-
1 file changed, 35 insertions(+), 1 deletion(-)
diff --git a/drivers/power/supply/bq25890_charger.c b/drivers/power/supply/bq25890_charger.c
index 945c3257ca93..7f52029f0702 100644
--- a/drivers/power/supply/bq25890_charger.c
+++ b/drivers/power/supply/bq25890_charger.c
@@ -266,6 +266,7 @@ enum bq25890_table_ids {
/* lookup tables */
TBL_TREG,
TBL_BOOSTI,
+ TBL_TSPCT,
};
/* Thermal Regulation Threshold lookup table, in degrees Celsius */
@@ -280,6 +281,28 @@ static const u32 bq25890_boosti_tbl[] = {
#define BQ25890_BOOSTI_TBL_SIZE ARRAY_SIZE(bq25890_boosti_tbl)
+/* NTC 10K temperature lookup table in thenths of a degree */
+static const u32 bq25890_tspct_tbl[] = {
+ 850, 840, 830, 820, 810, 800, 790, 780,
+ 770, 760, 750, 740, 730, 720, 710, 700,
+ 690, 685, 680, 675, 670, 660, 650, 645,
+ 640, 630, 620, 615, 610, 600, 590, 585,
+ 580, 570, 565, 560, 550, 540, 535, 530,
+ 520, 515, 510, 500, 495, 490, 480, 475,
+ 470, 460, 455, 450, 440, 435, 430, 425,
+ 420, 410, 405, 400, 390, 385, 380, 370,
+ 365, 360, 355, 350, 340, 335, 330, 320,
+ 310, 305, 300, 290, 285, 280, 275, 270,
+ 260, 250, 245, 240, 230, 225, 220, 210,
+ 205, 200, 190, 180, 175, 170, 160, 150,
+ 145, 140, 130, 120, 115, 110, 100, 90,
+ 80, 70, 60, 50, 40, 30, 20, 10,
+ 0, -10, -20, -30, -40, -60, -70, -80,
+ -90, -10, -120, -140, -150, -170, -190, -210,
+};
+
+#define BQ25890_TSPCT_TBL_SIZE ARRAY_SIZE(bq25890_tspct_tbl)
+
struct bq25890_range {
u32 min;
u32 max;
@@ -308,7 +331,8 @@ static const union {
/* lookup tables */
[TBL_TREG] = { .lt = {bq25890_treg_tbl, BQ25890_TREG_TBL_SIZE} },
- [TBL_BOOSTI] = { .lt = {bq25890_boosti_tbl, BQ25890_BOOSTI_TBL_SIZE} }
+ [TBL_BOOSTI] = { .lt = {bq25890_boosti_tbl, BQ25890_BOOSTI_TBL_SIZE} },
+ [TBL_TSPCT] = { .lt = {bq25890_tspct_tbl, BQ25890_TSPCT_TBL_SIZE} }
};
static int bq25890_field_read(struct bq25890_device *bq,
@@ -528,6 +552,15 @@ static int bq25890_power_supply_get_property(struct power_supply *psy,
val->intval = ret * -50000;
break;
+ case POWER_SUPPLY_PROP_TEMP:
+ ret = bq25890_field_read(bq, F_TSPCT);
+ if (ret < 0)
+ return ret;
+
+ /* convert TS percentage into rough temperature */
+ val->intval = bq25890_find_val(ret, TBL_TSPCT);
+ break;
+
default:
return -EINVAL;
}
@@ -713,6 +746,7 @@ static const enum power_supply_property bq25890_power_supply_props[] = {
POWER_SUPPLY_PROP_INPUT_CURRENT_LIMIT,
POWER_SUPPLY_PROP_VOLTAGE_NOW,
POWER_SUPPLY_PROP_CURRENT_NOW,
+ POWER_SUPPLY_PROP_TEMP,
};
static char *bq25890_charger_supplied_to[] = {
--
2.25.1
next reply other threads:[~2021-11-15 18:11 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-11-15 18:02 Angus Ainslie [this message]
2021-11-16 11:44 ` [PATCH] power: bq25890: add POWER_SUPPLY_PROP_TEMP Sebastian Reichel
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20211115180253.124271-1-angus@akkea.ca \
--to=angus@akkea.ca \
--cc=kernel@puri.sm \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pm@vger.kernel.org \
--cc=sre@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox