From: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
To: Andy Gross <agross@kernel.org>,
Bjorn Andersson <bjorn.andersson@linaro.org>,
Amit Kucheria <amitk@kernel.org>,
Thara Gopinath <thara.gopinath@gmail.com>,
Rob Herring <robh+dt@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Michael Turquette <mturquette@baylibre.com>,
Stephen Boyd <sboyd@kernel.org>
Cc: linux-arm-msm@vger.kernel.org, linux-pm@vger.kernel.org,
devicetree@vger.kernel.org, linux-clk@vger.kernel.org
Subject: [PATCH 4/4] arm: dts: qcom-apq8064: create tsens device node
Date: Wed, 6 Apr 2022 02:59:10 +0300 [thread overview]
Message-ID: <20220405235910.373107-5-dmitry.baryshkov@linaro.org> (raw)
In-Reply-To: <20220405235910.373107-1-dmitry.baryshkov@linaro.org>
Create separate device node for thermal sensors on apq8064 platform.
Move related properties to the newly created device tree node.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
---
arch/arm/boot/dts/qcom-apq8064.dtsi | 23 ++++++++++++++++-------
1 file changed, 16 insertions(+), 7 deletions(-)
diff --git a/arch/arm/boot/dts/qcom-apq8064.dtsi b/arch/arm/boot/dts/qcom-apq8064.dtsi
index b9e9a9f9d3e2..87e8861d647c 100644
--- a/arch/arm/boot/dts/qcom-apq8064.dtsi
+++ b/arch/arm/boot/dts/qcom-apq8064.dtsi
@@ -105,7 +105,7 @@ cpu0-thermal {
polling-delay-passive = <250>;
polling-delay = <1000>;
- thermal-sensors = <&gcc 7>;
+ thermal-sensors = <&tsens 7>;
coefficients = <1199 0>;
trips {
@@ -126,7 +126,7 @@ cpu1-thermal {
polling-delay-passive = <250>;
polling-delay = <1000>;
- thermal-sensors = <&gcc 8>;
+ thermal-sensors = <&tsens 8>;
coefficients = <1132 0>;
trips {
@@ -147,7 +147,7 @@ cpu2-thermal {
polling-delay-passive = <250>;
polling-delay = <1000>;
- thermal-sensors = <&gcc 9>;
+ thermal-sensors = <&tsens 9>;
coefficients = <1199 0>;
trips {
@@ -168,7 +168,7 @@ cpu3-thermal {
polling-delay-passive = <250>;
polling-delay = <1000>;
- thermal-sensors = <&gcc 10>;
+ thermal-sensors = <&tsens 10>;
coefficients = <1132 0>;
trips {
@@ -812,12 +812,21 @@ tsens_backup: backup_calib {
gcc: clock-controller@900000 {
compatible = "qcom,gcc-apq8064";
reg = <0x00900000 0x4000>;
- nvmem-cells = <&tsens_calib>, <&tsens_backup>;
- nvmem-cell-names = "calib", "calib_backup";
#clock-cells = <1>;
#power-domain-cells = <1>;
#reset-cells = <1>;
- #thermal-sensor-cells = <1>;
+
+ tsens: thermal-sensor@900000 {
+ compatible = "qcom,msm8960-tsens";
+
+ nvmem-cells = <&tsens_calib>, <&tsens_backup>;
+ nvmem-cell-names = "calib", "calib_backup";
+ interrupts = <GIC_SPI 178 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "uplow";
+
+ #qcom,sensors = <11>;
+ #thermal-sensor-cells = <1>;
+ };
};
lcc: clock-controller@28000000 {
--
2.35.1
prev parent reply other threads:[~2022-04-06 5:35 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-04-05 23:59 [PATCH 0/4] arm: qcom: qcom-apq8064: add separate device node for tsens Dmitry Baryshkov
2022-04-05 23:59 ` [PATCH 1/4] dt-bindings: thermal: qcom-tsens.yaml: add msm8960 compat string Dmitry Baryshkov
2022-04-05 23:59 ` [PATCH 2/4] thermal/drivers/tsens: add compat string for the qcom,msm8960 Dmitry Baryshkov
2022-04-05 23:59 ` [PATCH 3/4] clk: qcom: gcc-msm8960: create tsens device if there are no child nodes Dmitry Baryshkov
2022-04-05 23:59 ` Dmitry Baryshkov [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220405235910.373107-5-dmitry.baryshkov@linaro.org \
--to=dmitry.baryshkov@linaro.org \
--cc=agross@kernel.org \
--cc=amitk@kernel.org \
--cc=bjorn.andersson@linaro.org \
--cc=devicetree@vger.kernel.org \
--cc=krzk+dt@kernel.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-clk@vger.kernel.org \
--cc=linux-pm@vger.kernel.org \
--cc=mturquette@baylibre.com \
--cc=robh+dt@kernel.org \
--cc=sboyd@kernel.org \
--cc=thara.gopinath@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).