[PATCH v1 04/26] thermal/drivers/st: Use generic trip points

[Daniel Lezcano <daniel.lezcano@linaro.org>]

The thermal framework gives the possibility to register the trip
points with the thermal zone. When that is done, no get_trip_* ops are
needed and they can be removed.

Convert to the generic trip points

Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
---
 drivers/thermal/st/st_thermal.c | 47 +++++----------------------------
 1 file changed, 7 insertions(+), 40 deletions(-)

diff --git a/drivers/thermal/st/st_thermal.c b/drivers/thermal/st/st_thermal.c
index 1276b95604fe..c0d45cdd1c2f 100644
--- a/drivers/thermal/st/st_thermal.c
+++ b/drivers/thermal/st/st_thermal.c
@@ -134,48 +134,12 @@ static int st_thermal_get_temp(struct thermal_zone_device *th, int *temperature)
 	return 0;
 }
 
-static int st_thermal_get_trip_type(struct thermal_zone_device *th,
-				int trip, enum thermal_trip_type *type)
-{
-	struct st_thermal_sensor *sensor = th->devdata;
-	struct device *dev = sensor->dev;
-
-	switch (trip) {
-	case 0:
-		*type = THERMAL_TRIP_CRITICAL;
-		break;
-	default:
-		dev_err(dev, "invalid trip point\n");
-		return -EINVAL;
-	}
-
-	return 0;
-}
-
-static int st_thermal_get_trip_temp(struct thermal_zone_device *th,
-				    int trip, int *temp)
-{
-	struct st_thermal_sensor *sensor = th->devdata;
-	struct device *dev = sensor->dev;
-
-	switch (trip) {
-	case 0:
-		*temp = mcelsius(sensor->cdata->crit_temp);
-		break;
-	default:
-		dev_err(dev, "Invalid trip point\n");
-		return -EINVAL;
-	}
-
-	return 0;
-}
-
 static struct thermal_zone_device_ops st_tz_ops = {
 	.get_temp	= st_thermal_get_temp,
-	.get_trip_type	= st_thermal_get_trip_type,
-	.get_trip_temp	= st_thermal_get_trip_temp,
 };
 
+static struct thermal_trip trip;
+
 int st_thermal_register(struct platform_device *pdev,
 			const struct of_device_id *st_thermal_of_match)
 {
@@ -238,9 +202,12 @@ int st_thermal_register(struct platform_device *pdev,
 
 	polling_delay = sensor->ops->register_enable_irq ? 0 : 1000;
 
+	trip.temperature = sensor->cdata->crit_temp;
+	trip.type = THERMAL_TRIP_CRITICAL;
+	
 	sensor->thermal_dev =
-		thermal_zone_device_register(dev_name(dev), 1, 0, sensor,
-					     &st_tz_ops, NULL, 0, polling_delay);
+		thermal_zone_device_register_with_trips(dev_name(dev), &trip, 1, 0, sensor,
+							&st_tz_ops, NULL, 0, polling_delay);
 	if (IS_ERR(sensor->thermal_dev)) {
 		dev_err(dev, "failed to register thermal zone device\n");
 		ret = PTR_ERR(sensor->thermal_dev);
-- 
2.25.1