[PATCH V4 0/4] Add tbench/gitsource new test cases for amd-pstate-ut

[PATCH V4 0/4] Add tbench/gitsource new test cases for amd-pstate-ut

[Meng Li]

Hi all:

First, we modify amd-pstate-ut.sh to basic.sh as a basic test, mainly for
AMD P-State kernel drivers. The purpose of this modification is to
facilitate the subsequent addition of gitsource, tbench and other tests.
You can test specific functions by specifying test cases.
Default test all cases, include basic, tbench and gitsource etc.

Secondly, add tbench.sh trigger the tbench testing and monitor the cpu

Third, add gitsource.sh trigger the gitsource testing and monitor the cpu
information.

Finally, modify rst document to introduce test steps and results etc.

See patch series in below git repo:
V1:https://lore.kernel.org/lkml/20220706073622.672135-1-li.meng@amd.com/
V2:https://lore.kernel.org/lkml/20220804054414.1510764-1-li.meng@amd.com/
V3:https://lore.kernel.org/lkml/20220914061105.1982477-1-li.meng@amd.com/

Changes from V1->V2:
- selftests: amd-pstate: basic
- - delete main.sh and merge funtions into run.sh
- selftests: amd-pstate: tbench
- - modify ppw to performance per watt for tbench.
- - add comments for performance per watt for tbench.
- - add comparative test on acpi-cpufreq for tbench.
- - calculate drop between amd-pstate and acpi-cpufreq etc.
- - plot images about perfrmance,energy and ppw for tbench.
- selftests: amd-pstate: gitsource
- - modify ppw to performance per watt for gitsource.
- - add comments for performance per watt for gitsource.
- - add comparative test on acpi-cpufreq for gitsource.
- - calculate drop between amd-pstate and acpi-cpufreq etc.
- - plot images about perfrmance,energy and ppw for gitsource.
- Documentation: amd-pstate:
- - modify rst doc, introduce comparative test etc.

Changes from V2->V3:
- selftests: amd-pstate:
- - reduce print logs for governor.
- - add a check to see if tbench and the perf tools are already installed.
- - install tbench package from apt or yum.
- - correct spelling errors from comprison to comparison.

Changes from V2->V3:
- selftests: amd-pstate:
- - modify cover letter and commit logs.
- Documentation: amd-pstate:
- - modify some format questions.

Thanks, 
Jasmine 

Meng Li (4):
  selftests: amd-pstate: Modify amd-pstate-ut.sh to basic.sh.
  selftests: amd-pstate: Trigger tbench benchmark and test cpus
  selftests: amd-pstate: Trigger gitsource benchmark and test cpus
  Documentation: amd-pstate: Add tbench and gitsource test introduction

 Documentation/admin-guide/pm/amd-pstate.rst   | 194 ++++++++-
 tools/testing/selftests/amd-pstate/Makefile   |  11 +-
 .../selftests/amd-pstate/amd-pstate-ut.sh     |  56 ---
 tools/testing/selftests/amd-pstate/basic.sh   |  38 ++
 .../testing/selftests/amd-pstate/gitsource.sh | 345 ++++++++++++++++
 tools/testing/selftests/amd-pstate/run.sh     | 387 ++++++++++++++++++
 tools/testing/selftests/amd-pstate/tbench.sh  | 334 +++++++++++++++
 7 files changed, 1288 insertions(+), 77 deletions(-)
 delete mode 100755 tools/testing/selftests/amd-pstate/amd-pstate-ut.sh
 create mode 100755 tools/testing/selftests/amd-pstate/basic.sh
 create mode 100755 tools/testing/selftests/amd-pstate/gitsource.sh
 create mode 100755 tools/testing/selftests/amd-pstate/run.sh
 create mode 100755 tools/testing/selftests/amd-pstate/tbench.sh

-- 
2.34.1

[PATCH V4 1/4] selftests: amd-pstate: Modify amd-pstate-ut.sh to basic.sh.

[Meng Li]

Modify amd-pstate-ut.sh to basic.sh.
The purpose of this modification is to facilitate the subsequent
addition of gitsource, tbench and other tests.
Then you can specify test case in kselftest/amd-pstate, for example:
sudo ./run.sh -c basic, this command only test basic kernel funcitions.
The detail please run the below script.
./run.sh --help

Signed-off-by: Meng Li <li.meng@amd.com>
Acked-by: Huang Rui <ray.huang@amd.com>
---
 tools/testing/selftests/amd-pstate/Makefile   |   3 +-
 .../selftests/amd-pstate/amd-pstate-ut.sh     |  56 -------
 tools/testing/selftests/amd-pstate/basic.sh   |  38 +++++
 tools/testing/selftests/amd-pstate/run.sh     | 142 ++++++++++++++++++
 4 files changed, 182 insertions(+), 57 deletions(-)
 delete mode 100755 tools/testing/selftests/amd-pstate/amd-pstate-ut.sh
 create mode 100755 tools/testing/selftests/amd-pstate/basic.sh
 create mode 100755 tools/testing/selftests/amd-pstate/run.sh

diff --git a/tools/testing/selftests/amd-pstate/Makefile b/tools/testing/selftests/amd-pstate/Makefile
index 199867f44b32..6f4c7b01e3bb 100644
--- a/tools/testing/selftests/amd-pstate/Makefile
+++ b/tools/testing/selftests/amd-pstate/Makefile
@@ -4,6 +4,7 @@
 # No binaries, but make sure arg-less "make" doesn't trigger "run_tests"
 all:
 
-TEST_PROGS := amd-pstate-ut.sh
+TEST_PROGS := run.sh
+TEST_FILES := basic.sh
 
 include ../lib.mk
diff --git a/tools/testing/selftests/amd-pstate/amd-pstate-ut.sh b/tools/testing/selftests/amd-pstate/amd-pstate-ut.sh
deleted file mode 100755
index f8e82d91ffcf..000000000000
--- a/tools/testing/selftests/amd-pstate/amd-pstate-ut.sh
+++ /dev/null
@@ -1,56 +0,0 @@
-#!/bin/sh
-# SPDX-License-Identifier: GPL-2.0
-
-# amd-pstate-ut is a test module for testing the amd-pstate driver.
-# It can only run on x86 architectures and current cpufreq driver
-# must be amd-pstate.
-# (1) It can help all users to verify their processor support
-# (SBIOS/Firmware or Hardware).
-# (2) Kernel can have a basic function test to avoid the kernel
-# regression during the update.
-# (3) We can introduce more functional or performance tests to align
-# the result together, it will benefit power and performance scale optimization.
-
-# Kselftest framework requirement - SKIP code is 4.
-ksft_skip=4
-
-# amd-pstate-ut only run on x86/x86_64 AMD systems.
-ARCH=$(uname -m 2>/dev/null | sed -e 's/i.86/x86/' -e 's/x86_64/x86/')
-VENDOR=$(cat /proc/cpuinfo | grep -m 1 'vendor_id' | awk '{print $NF}')
-
-if ! echo "$ARCH" | grep -q x86; then
-	echo "$0 # Skipped: Test can only run on x86 architectures."
-	exit $ksft_skip
-fi
-
-if ! echo "$VENDOR" | grep -iq amd; then
-	echo "$0 # Skipped: Test can only run on AMD CPU."
-	echo "$0 # Current cpu vendor is $VENDOR."
-	exit $ksft_skip
-fi
-
-scaling_driver=$(cat /sys/devices/system/cpu/cpufreq/policy0/scaling_driver)
-if [ "$scaling_driver" != "amd-pstate" ]; then
-	echo "$0 # Skipped: Test can only run on amd-pstate driver."
-	echo "$0 # Please set X86_AMD_PSTATE enabled."
-	echo "$0 # Current cpufreq scaling drvier is $scaling_driver."
-	exit $ksft_skip
-fi
-
-msg="Skip all tests:"
-if [ ! -w /dev ]; then
-    echo $msg please run this as root >&2
-    exit $ksft_skip
-fi
-
-if ! /sbin/modprobe -q -n amd-pstate-ut; then
-	echo "amd-pstate-ut: module amd-pstate-ut is not found [SKIP]"
-	exit $ksft_skip
-fi
-if /sbin/modprobe -q amd-pstate-ut; then
-	/sbin/modprobe -q -r amd-pstate-ut
-	echo "amd-pstate-ut: ok"
-else
-	echo "amd-pstate-ut: [FAIL]"
-	exit 1
-fi
diff --git a/tools/testing/selftests/amd-pstate/basic.sh b/tools/testing/selftests/amd-pstate/basic.sh
new file mode 100755
index 000000000000..e4c43193e4a3
--- /dev/null
+++ b/tools/testing/selftests/amd-pstate/basic.sh
@@ -0,0 +1,38 @@
+#!/bin/sh
+# SPDX-License-Identifier: GPL-2.0
+
+# amd-pstate-ut is a test module for testing the amd-pstate driver.
+# It can only run on x86 architectures and current cpufreq driver
+# must be amd-pstate.
+# (1) It can help all users to verify their processor support
+# (SBIOS/Firmware or Hardware).
+# (2) Kernel can have a basic function test to avoid the kernel
+# regression during the update.
+# (3) We can introduce more functional or performance tests to align
+# the result together, it will benefit power and performance scale optimization.
+
+# protect against multiple inclusion
+if [ $FILE_BASIC ]; then
+	return 0
+else
+	FILE_BASIC=DONE
+fi
+
+amd_pstate_basic()
+{
+	printf "\n---------------------------------------------\n"
+	printf "*** Running AMD P-state ut                ***"
+	printf "\n---------------------------------------------\n"
+
+	if ! /sbin/modprobe -q -n amd-pstate-ut; then
+		echo "amd-pstate-ut: module amd-pstate-ut is not found [SKIP]"
+		exit $ksft_skip
+	fi
+	if /sbin/modprobe -q amd-pstate-ut; then
+		/sbin/modprobe -q -r amd-pstate-ut
+		echo "amd-pstate-basic: ok"
+	else
+		echo "amd-pstate-basic: [FAIL]"
+		exit 1
+	fi
+}
diff --git a/tools/testing/selftests/amd-pstate/run.sh b/tools/testing/selftests/amd-pstate/run.sh
new file mode 100755
index 000000000000..715e9d01484f
--- /dev/null
+++ b/tools/testing/selftests/amd-pstate/run.sh
@@ -0,0 +1,142 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0
+
+# protect against multiple inclusion
+if [ $FILE_MAIN ]; then
+	return 0
+else
+	FILE_MAIN=DONE
+fi
+
+source basic.sh
+
+# amd-pstate-ut only run on x86/x86_64 AMD systems.
+ARCH=$(uname -m 2>/dev/null | sed -e 's/i.86/x86/' -e 's/x86_64/x86/')
+VENDOR=$(cat /proc/cpuinfo | grep -m 1 'vendor_id' | awk '{print $NF}')
+
+FUNC=all
+OUTFILE=selftest
+
+# Kselftest framework requirement - SKIP code is 4.
+ksft_skip=4
+
+# All amd-pstate tests
+amd_pstate_all()
+{
+	printf "\n=============================================\n"
+	printf "***** Running AMD P-state Sanity Tests  *****\n"
+	printf "=============================================\n\n"
+
+	# unit test for amd-pstate kernel driver
+	amd_pstate_basic
+}
+
+helpme()
+{
+	printf "Usage: $0 [OPTION...]
+	[-h <help>]
+	[-o <output-file-for-dump>]
+	[-c <all: All testing,
+	     basic: Basic testing.>]
+	\n"
+	exit 2
+}
+
+parse_arguments()
+{
+	while getopts ho:c: arg
+	do
+		case $arg in
+			h) # --help
+				helpme
+				;;
+
+			c) # --func_type (Function to perform: basic (default: all))
+				FUNC=$OPTARG
+				;;
+
+			o) # --output-file (Output file to store dumps)
+				OUTFILE=$OPTARG
+				;;
+
+			*)
+				helpme
+				;;
+		esac
+	done
+}
+
+prerequisite()
+{
+	if ! echo "$ARCH" | grep -q x86; then
+		echo "$0 # Skipped: Test can only run on x86 architectures."
+		exit $ksft_skip
+	fi
+
+	if ! echo "$VENDOR" | grep -iq amd; then
+		echo "$0 # Skipped: Test can only run on AMD CPU."
+		echo "$0 # Current cpu vendor is $VENDOR."
+		exit $ksft_skip
+	fi
+
+	scaling_driver=$(cat /sys/devices/system/cpu/cpufreq/policy0/scaling_driver)
+	if [ "$scaling_driver" != "amd-pstate" ]; then
+		echo "$0 # Skipped: Test can only run on amd-pstate driver."
+		echo "$0 # Please set X86_AMD_PSTATE enabled."
+		echo "$0 # Current cpufreq scaling drvier is $scaling_driver."
+		exit $ksft_skip
+	fi
+
+	msg="Skip all tests:"
+	if [ ! -w /dev ]; then
+		echo $msg please run this as root >&2
+		exit $ksft_skip
+	fi
+}
+
+do_test()
+{
+	case "$FUNC" in
+		"all")
+			amd_pstate_all
+			;;
+
+		"basic")
+			amd_pstate_basic
+			;;
+
+		*)
+			echo "Invalid [-f] function type"
+			helpme
+			;;
+	esac
+}
+
+# clear dumps
+pre_clear_dumps()
+{
+	case "$FUNC" in
+		"all")
+			rm -rf $OUTFILE*
+			;;
+
+		*)
+			;;
+	esac
+}
+
+post_clear_dumps()
+{
+	rm -rf $OUTFILE.log
+}
+
+# Parse arguments
+parse_arguments $@
+
+# Make sure all requirements are met
+prerequisite
+
+# Run requested functions
+pre_clear_dumps
+do_test | tee -a $OUTFILE.log
+post_clear_dumps
-- 
2.34.1

Re: [PATCH V4 1/4] selftests: amd-pstate: Modify amd-pstate-ut.sh to basic.sh.

[Shuah Khan]

On 10/23/22 19:33, Meng Li wrote:
> Modify amd-pstate-ut.sh to basic.sh.
> The purpose of this modification is to facilitate the subsequent
> addition of gitsource, tbench and other tests.
> Then you can specify test case in kselftest/amd-pstate, for example:
> sudo ./run.sh -c basic, this command only test basic kernel funcitions.
> The detail please run the below script.
> ./run.sh --help
> 
> Signed-off-by: Meng Li <li.meng@amd.com>
> Acked-by: Huang Rui <ray.huang@amd.com>
> ---
>   tools/testing/selftests/amd-pstate/Makefile   |   3 +-
>   .../selftests/amd-pstate/amd-pstate-ut.sh     |  56 -------
>   tools/testing/selftests/amd-pstate/basic.sh   |  38 +++++
>   tools/testing/selftests/amd-pstate/run.sh     | 142 ++++++++++++++++++
>   4 files changed, 182 insertions(+), 57 deletions(-)
>   delete mode 100755 tools/testing/selftests/amd-pstate/amd-pstate-ut.sh
>   create mode 100755 tools/testing/selftests/amd-pstate/basic.sh

Is there a reason to delete followed by a create?  It is cleaner to rename amd-pstate-ut.sh
it to basic.sh first and then make changes.

>   create mode 100755 tools/testing/selftests/amd-pstate/run.sh
> 
> diff --git a/tools/testing/selftests/amd-pstate/Makefile b/tools/testing/selftests/amd-pstate/Makefile
> index 199867f44b32..6f4c7b01e3bb 100644
> --- a/tools/testing/selftests/amd-pstate/Makefile
> +++ b/tools/testing/selftests/amd-pstate/Makefile
> @@ -4,6 +4,7 @@
>   # No binaries, but make sure arg-less "make" doesn't trigger "run_tests"
>   all:
>   
> -TEST_PROGS := amd-pstate-ut.sh
> +TEST_PROGS := run.sh
> +TEST_FILES := basic.sh
>   
>   include ../lib.mk
> diff --git a/tools/testing/selftests/amd-pstate/amd-pstate-ut.sh b/tools/testing/selftests/amd-pstate/amd-pstate-ut.sh
> deleted file mode 100755
> index f8e82d91ffcf..000000000000
> --- a/tools/testing/selftests/amd-pstate/amd-pstate-ut.sh
> +++ /dev/null
> @@ -1,56 +0,0 @@
> -#!/bin/sh
> -# SPDX-License-Identifier: GPL-2.0
> -
> -# amd-pstate-ut is a test module for testing the amd-pstate driver.
> -# It can only run on x86 architectures and current cpufreq driver
> -# must be amd-pstate.
> -# (1) It can help all users to verify their processor support
> -# (SBIOS/Firmware or Hardware).
> -# (2) Kernel can have a basic function test to avoid the kernel
> -# regression during the update.
> -# (3) We can introduce more functional or performance tests to align
> -# the result together, it will benefit power and performance scale optimization.
> -
> -# Kselftest framework requirement - SKIP code is 4.
> -ksft_skip=4
> -
> -# amd-pstate-ut only run on x86/x86_64 AMD systems.
> -ARCH=$(uname -m 2>/dev/null | sed -e 's/i.86/x86/' -e 's/x86_64/x86/')
> -VENDOR=$(cat /proc/cpuinfo | grep -m 1 'vendor_id' | awk '{print $NF}')
> -
> -if ! echo "$ARCH" | grep -q x86; then
> -	echo "$0 # Skipped: Test can only run on x86 architectures."
> -	exit $ksft_skip
> -fi
> -
> -if ! echo "$VENDOR" | grep -iq amd; then
> -	echo "$0 # Skipped: Test can only run on AMD CPU."
> -	echo "$0 # Current cpu vendor is $VENDOR."
> -	exit $ksft_skip
> -fi
> -
> -scaling_driver=$(cat /sys/devices/system/cpu/cpufreq/policy0/scaling_driver)
> -if [ "$scaling_driver" != "amd-pstate" ]; then
> -	echo "$0 # Skipped: Test can only run on amd-pstate driver."
> -	echo "$0 # Please set X86_AMD_PSTATE enabled."
> -	echo "$0 # Current cpufreq scaling drvier is $scaling_driver."
> -	exit $ksft_skip
> -fi
> -
> -msg="Skip all tests:"
> -if [ ! -w /dev ]; then
> -    echo $msg please run this as root >&2
> -    exit $ksft_skip
> -fi
> -
> -if ! /sbin/modprobe -q -n amd-pstate-ut; then
> -	echo "amd-pstate-ut: module amd-pstate-ut is not found [SKIP]"
> -	exit $ksft_skip
> -fi
> -if /sbin/modprobe -q amd-pstate-ut; then
> -	/sbin/modprobe -q -r amd-pstate-ut
> -	echo "amd-pstate-ut: ok"
> -else
> -	echo "amd-pstate-ut: [FAIL]"
> -	exit 1
> -fi
> diff --git a/tools/testing/selftests/amd-pstate/basic.sh b/tools/testing/selftests/amd-pstate/basic.sh
> new file mode 100755
> index 000000000000..e4c43193e4a3
> --- /dev/null
> +++ b/tools/testing/selftests/amd-pstate/basic.sh
> @@ -0,0 +1,38 @@
> +#!/bin/sh
> +# SPDX-License-Identifier: GPL-2.0
> +
> +# amd-pstate-ut is a test module for testing the amd-pstate driver.
> +# It can only run on x86 architectures and current cpufreq driver
> +# must be amd-pstate.
> +# (1) It can help all users to verify their processor support
> +# (SBIOS/Firmware or Hardware).
> +# (2) Kernel can have a basic function test to avoid the kernel
> +# regression during the update.
> +# (3) We can introduce more functional or performance tests to align
> +# the result together, it will benefit power and performance scale optimization.
> +
> +# protect against multiple inclusion
> +if [ $FILE_BASIC ]; then
> +	return 0
> +else
> +	FILE_BASIC=DONE
> +fi
> +
> +amd_pstate_basic()
> +{
> +	printf "\n---------------------------------------------\n"
> +	printf "*** Running AMD P-state ut                ***"
> +	printf "\n---------------------------------------------\n"
> +
> +	if ! /sbin/modprobe -q -n amd-pstate-ut; then
> +		echo "amd-pstate-ut: module amd-pstate-ut is not found [SKIP]"
> +		exit $ksft_skip
> +	fi
> +	if /sbin/modprobe -q amd-pstate-ut; then
> +		/sbin/modprobe -q -r amd-pstate-ut
> +		echo "amd-pstate-basic: ok"
> +	else
> +		echo "amd-pstate-basic: [FAIL]"
> +		exit 1
> +	fi
> +}
> diff --git a/tools/testing/selftests/amd-pstate/run.sh b/tools/testing/selftests/amd-pstate/run.sh
> new file mode 100755
> index 000000000000..715e9d01484f
> --- /dev/null
> +++ b/tools/testing/selftests/amd-pstate/run.sh
> @@ -0,0 +1,142 @@
> +#!/bin/bash
> +# SPDX-License-Identifier: GPL-2.0
> +
> +# protect against multiple inclusion
> +if [ $FILE_MAIN ]; then
> +	return 0
> +else
> +	FILE_MAIN=DONE
> +fi
> +
> +source basic.sh
> +
> +# amd-pstate-ut only run on x86/x86_64 AMD systems.
> +ARCH=$(uname -m 2>/dev/null | sed -e 's/i.86/x86/' -e 's/x86_64/x86/')
> +VENDOR=$(cat /proc/cpuinfo | grep -m 1 'vendor_id' | awk '{print $NF}')
> +
> +FUNC=all
> +OUTFILE=selftest
> +
> +# Kselftest framework requirement - SKIP code is 4.
> +ksft_skip=4
> +
> +# All amd-pstate tests
> +amd_pstate_all()
> +{
> +	printf "\n=============================================\n"
> +	printf "***** Running AMD P-state Sanity Tests  *****\n"
> +	printf "=============================================\n\n"
> +
> +	# unit test for amd-pstate kernel driver
> +	amd_pstate_basic
> +}
> +
> +helpme()

Make this just help()

> +{
> +	printf "Usage: $0 [OPTION...]
> +	[-h <help>]
> +	[-o <output-file-for-dump>]
> +	[-c <all: All testing,
> +	     basic: Basic testing.>]
> +	\n"
> +	exit 2
> +}
> +
> +parse_arguments()
> +{
> +	while getopts ho:c: arg
> +	do
> +		case $arg in
> +			h) # --help
> +				helpme
> +				;;
> +
> +			c) # --func_type (Function to perform: basic (default: all))
> +				FUNC=$OPTARG
> +				;;
> +
> +			o) # --output-file (Output file to store dumps)
> +				OUTFILE=$OPTARG
> +				;;
> +
> +			*)
> +				helpme

Same here

> +				;;
> +		esac
> +	done
> +}
> +
> +prerequisite()
> +{
> +	if ! echo "$ARCH" | grep -q x86; then
> +		echo "$0 # Skipped: Test can only run on x86 architectures."
> +		exit $ksft_skip
> +	fi
> +
> +	if ! echo "$VENDOR" | grep -iq amd; then
> +		echo "$0 # Skipped: Test can only run on AMD CPU."
> +		echo "$0 # Current cpu vendor is $VENDOR."
> +		exit $ksft_skip
> +	fi
> +
> +	scaling_driver=$(cat /sys/devices/system/cpu/cpufreq/policy0/scaling_driver)
> +	if [ "$scaling_driver" != "amd-pstate" ]; then
> +		echo "$0 # Skipped: Test can only run on amd-pstate driver."
> +		echo "$0 # Please set X86_AMD_PSTATE enabled."
> +		echo "$0 # Current cpufreq scaling drvier is $scaling_driver."
> +		exit $ksft_skip
> +	fi
> +
> +	msg="Skip all tests:"
> +	if [ ! -w /dev ]; then
> +		echo $msg please run this as root >&2
> +		exit $ksft_skip
> +	fi
> +}
> +
> +do_test()
> +{
> +	case "$FUNC" in
> +		"all")
> +			amd_pstate_all
> +			;;
> +
> +		"basic")
> +			amd_pstate_basic
> +			;;
> +
> +		*)
> +			echo "Invalid [-f] function type"
> +			helpme
> +			;;
> +	esac
> +}
> +
> +# clear dumps
> +pre_clear_dumps()
> +{
> +	case "$FUNC" in
> +		"all")
> +			rm -rf $OUTFILE*
> +			;;
> +
> +		*)
> +			;;
> +	esac
> +}
> +
> +post_clear_dumps()
> +{
> +	rm -rf $OUTFILE.log
> +}
> +
> +# Parse arguments
> +parse_arguments $@
> +
> +# Make sure all requirements are met
> +prerequisite
> +
> +# Run requested functions
> +pre_clear_dumps
> +do_test | tee -a $OUTFILE.log
> +post_clear_dumps

[PATCH V4 2/4] selftests: amd-pstate: Trigger tbench benchmark and test cpus

[Meng Li]

Add tbench.sh trigger the tbench testing and monitor the cpu desire
performance, frequency, load, power consumption and throughput etc.
1) Download and install tbench codes.
2) Run tbench benchmark on specific governors, ondemand or schedutil.
3) Run tbench benchmark comparative test on acpi-cpufreq kernel driver.
4) Get desire performance, frequency, load by perf.
5) Get power consumption and throughput by amd_pstate_trace.py.
6) Analyse test results and save it in file selftest.tbench.csv.
7) Plot png images about performance, energy and performance per watt
for each test.

Signed-off-by: Meng Li <li.meng@amd.com>
---
 tools/testing/selftests/amd-pstate/Makefile  |  10 +-
 tools/testing/selftests/amd-pstate/run.sh    | 243 +++++++++++++-
 tools/testing/selftests/amd-pstate/tbench.sh | 334 +++++++++++++++++++
 3 files changed, 577 insertions(+), 10 deletions(-)
 create mode 100755 tools/testing/selftests/amd-pstate/tbench.sh

diff --git a/tools/testing/selftests/amd-pstate/Makefile b/tools/testing/selftests/amd-pstate/Makefile
index 6f4c7b01e3bb..cac8dedb7226 100644
--- a/tools/testing/selftests/amd-pstate/Makefile
+++ b/tools/testing/selftests/amd-pstate/Makefile
@@ -4,7 +4,15 @@
 # No binaries, but make sure arg-less "make" doesn't trigger "run_tests"
 all:
 
+uname_M := $(shell uname -m 2>/dev/null || echo not)
+ARCH ?= $(shell echo $(uname_M) | sed -e s/i.86/x86/ -e s/x86_64/x86/)
+
+ifeq (x86,$(ARCH))
+TEST_GEN_FILES += ../../../power/x86/amd_pstate_tracer/amd_pstate_trace.py
+TEST_GEN_FILES += ../../../power/x86/intel_pstate_tracer/intel_pstate_tracer.py
+endif
+
 TEST_PROGS := run.sh
-TEST_FILES := basic.sh
+TEST_FILES := basic.sh tbench.sh
 
 include ../lib.mk
diff --git a/tools/testing/selftests/amd-pstate/run.sh b/tools/testing/selftests/amd-pstate/run.sh
index 715e9d01484f..dea61e4443fc 100755
--- a/tools/testing/selftests/amd-pstate/run.sh
+++ b/tools/testing/selftests/amd-pstate/run.sh
@@ -9,6 +9,7 @@ else
 fi
 
 source basic.sh
+source tbench.sh
 
 # amd-pstate-ut only run on x86/x86_64 AMD systems.
 ARCH=$(uname -m 2>/dev/null | sed -e 's/i.86/x86/' -e 's/x86_64/x86/')
@@ -16,9 +17,98 @@ VENDOR=$(cat /proc/cpuinfo | grep -m 1 'vendor_id' | awk '{print $NF}')
 
 FUNC=all
 OUTFILE=selftest
+OUTFILE_TBENCH="$OUTFILE.tbench"
+
+SYSFS=
+CPUROOT=
+CPUFREQROOT=
+MAKE_CPUS=
+
+TIME_LIMIT=100
+PROCESS_NUM=128
+LOOP_TIMES=3
+TRACER_INTERVAL=10
+CURRENT_TEST=amd-pstate
+COMPARATIVE_TEST=
 
 # Kselftest framework requirement - SKIP code is 4.
 ksft_skip=4
+all_scaling_names=("acpi-cpufreq" "amd-pstate")
+
+# Get current cpufreq scaling driver name
+scaling_name()
+{
+	if [ "$COMPARATIVE_TEST" = "" ]; then
+		echo "$CURRENT_TEST"
+	else
+		echo "$COMPARATIVE_TEST"
+	fi
+}
+
+# Counts CPUs with cpufreq directories
+count_cpus()
+{
+	count=0;
+
+	for cpu in `ls $CPUROOT | grep "cpu[0-9].*"`; do
+		if [ -d $CPUROOT/$cpu/cpufreq ]; then
+			let count=count+1;
+		fi
+	done
+
+	echo $count;
+}
+
+# $1: policy
+find_current_governor()
+{
+	cat $CPUFREQROOT/$1/scaling_governor
+}
+
+backup_governor()
+{
+	policies=$(ls $CPUFREQROOT| grep "policy[0-9].*")
+	for policy in $policies; do
+		cur_gov=$(find_current_governor $policy)
+		echo "$policy $cur_gov" >> $OUTFILE.backup_governor.log
+	done
+
+	printf "Governor $cur_gov backup done.\n"
+}
+
+restore_governor()
+{
+	i=0;
+
+	policies=$(awk '{print $1}' $OUTFILE.backup_governor.log)
+	for policy in $policies; do
+		let i++;
+		governor=$(sed -n ''$i'p' $OUTFILE.backup_governor.log | awk '{print $2}')
+
+		# switch governor
+		echo $governor > $CPUFREQROOT/$policy/scaling_governor
+	done
+
+	printf "Governor restored to $governor.\n"
+}
+
+# $1: governor
+switch_governor()
+{
+	policies=$(ls $CPUFREQROOT| grep "policy[0-9].*")
+	for policy in $policies; do
+		filepath=$CPUFREQROOT/$policy/scaling_available_governors
+
+		# Exit if cpu isn't managed by cpufreq core
+		if [ ! -f $filepath ]; then
+			return;
+		fi
+
+		echo $1 > $CPUFREQROOT/$policy/scaling_governor
+	done
+
+	printf "Switched governor to $1.\n"
+}
 
 # All amd-pstate tests
 amd_pstate_all()
@@ -27,8 +117,19 @@ amd_pstate_all()
 	printf "***** Running AMD P-state Sanity Tests  *****\n"
 	printf "=============================================\n\n"
 
+	count=$(count_cpus)
+	if [ $count = 0 ]; then
+		printf "No cpu is managed by cpufreq core, exiting\n"
+		exit;
+	else
+		printf "AMD P-state manages: $count CPUs\n"
+	fi
+
 	# unit test for amd-pstate kernel driver
 	amd_pstate_basic
+
+	# tbench
+	amd_pstate_tbench
 }
 
 helpme()
@@ -37,21 +138,27 @@ helpme()
 	[-h <help>]
 	[-o <output-file-for-dump>]
 	[-c <all: All testing,
-	     basic: Basic testing.>]
+	     basic: Basic testing,
+	     tbench: Tbench testing.>]
+	[-t <tbench time limit>]
+	[-p <tbench process number>]
+	[-l <loop times for tbench>]
+	[-i <amd tracer interval>]
+	[-m <comparative test: acpi-cpufreq>]
 	\n"
 	exit 2
 }
 
 parse_arguments()
 {
-	while getopts ho:c: arg
+	while getopts ho:c:t:p:l:i:m: arg
 	do
 		case $arg in
 			h) # --help
 				helpme
 				;;
 
-			c) # --func_type (Function to perform: basic (default: all))
+			c) # --func_type (Function to perform: basic, tbench (default: all))
 				FUNC=$OPTARG
 				;;
 
@@ -59,6 +166,26 @@ parse_arguments()
 				OUTFILE=$OPTARG
 				;;
 
+			t) # --tbench-time-limit
+				TIME_LIMIT=$OPTARG
+				;;
+
+			p) # --tbench-process-number
+				PROCESS_NUM=$OPTARG
+				;;
+
+			l) # --tbench-loop-times
+				LOOP_TIMES=$OPTARG
+				;;
+
+			i) # --amd-tracer-interval
+				TRACER_INTERVAL=$OPTARG
+				;;
+
+			m) # --comparative-test
+				COMPARATIVE_TEST=$OPTARG
+				;;
+
 			*)
 				helpme
 				;;
@@ -66,6 +193,32 @@ parse_arguments()
 	done
 }
 
+command_perf()
+{
+	if ! command -v perf > /dev/null; then
+		echo $msg please install perf. >&2
+		exit $ksft_skip
+	fi
+}
+
+command_tbench()
+{
+	if ! command -v tbench > /dev/null; then
+		if apt policy dbench > /dev/null 2>&1; then
+			printf "Install dbench, please wait a moment ...\n"
+			sudo apt install dbench > /dev/null 2>&1
+		elif yum list available | grep dbench > /dev/null 2>&1; then
+			printf "Install dbench, please wait a moment ...\n"
+			sudo yum install dbench > /dev/null 2>&1
+		fi
+	fi
+
+	if ! command -v tbench > /dev/null; then
+		echo $msg please install tbench. >&2
+		exit $ksft_skip
+	fi
+}
+
 prerequisite()
 {
 	if ! echo "$ARCH" | grep -q x86; then
@@ -80,11 +233,29 @@ prerequisite()
 	fi
 
 	scaling_driver=$(cat /sys/devices/system/cpu/cpufreq/policy0/scaling_driver)
-	if [ "$scaling_driver" != "amd-pstate" ]; then
-		echo "$0 # Skipped: Test can only run on amd-pstate driver."
-		echo "$0 # Please set X86_AMD_PSTATE enabled."
-		echo "$0 # Current cpufreq scaling drvier is $scaling_driver."
-		exit $ksft_skip
+	if [ "$COMPARATIVE_TEST" = "" ]; then
+		if [ "$scaling_driver" != "$CURRENT_TEST" ]; then
+			echo "$0 # Skipped: Test can only run on $CURRENT_TEST driver or run comparative test."
+			echo "$0 # Please set X86_AMD_PSTATE enabled or run comparative test."
+			echo "$0 # Current cpufreq scaling drvier is $scaling_driver."
+			exit $ksft_skip
+		fi
+	else
+		case "$FUNC" in
+			"tbench")
+				if [ "$scaling_driver" != "$COMPARATIVE_TEST" ]; then
+					echo "$0 # Skipped: Comparison test can only run on $COMPARATIVE_TEST driver."
+					echo "$0 # Current cpufreq scaling drvier is $scaling_driver."
+					exit $ksft_skip
+				fi
+				;;
+
+			*)
+				echo "$0 # Skipped: Comparison test are only for tbench."
+				echo "$0 # Current comparative test is for $FUNC."
+				exit $ksft_skip
+				;;
+		esac
 	fi
 
 	msg="Skip all tests:"
@@ -92,10 +263,51 @@ prerequisite()
 		echo $msg please run this as root >&2
 		exit $ksft_skip
 	fi
+
+	case "$FUNC" in
+		"all")
+			command_perf
+			command_tbench
+			;;
+
+		"tbench")
+			command_perf
+			command_tbench
+			;;
+	esac
+
+	SYSFS=`mount -t sysfs | head -1 | awk '{ print $3 }'`
+
+	if [ ! -d "$SYSFS" ]; then
+		echo $msg sysfs is not mounted >&2
+		exit 2
+	fi
+
+	CPUROOT=$SYSFS/devices/system/cpu
+	CPUFREQROOT="$CPUROOT/cpufreq"
+
+	if ! ls $CPUROOT/cpu* > /dev/null 2>&1; then
+		echo $msg cpus not available in sysfs >&2
+		exit 2
+	fi
+
+	if ! ls $CPUROOT/cpufreq > /dev/null 2>&1; then
+		echo $msg cpufreq directory not available in sysfs >&2
+		exit 2
+	fi
 }
 
 do_test()
 {
+	# Check if CPUs are managed by cpufreq or not
+	count=$(count_cpus)
+	MAKE_CPUS=$((count*2))
+
+	if [ $count = 0 ]; then
+		echo "No cpu is managed by cpufreq core, exiting"
+		exit 2;
+	fi
+
 	case "$FUNC" in
 		"all")
 			amd_pstate_all
@@ -105,6 +317,10 @@ do_test()
 			amd_pstate_basic
 			;;
 
+		"tbench")
+			amd_pstate_tbench
+			;;
+
 		*)
 			echo "Invalid [-f] function type"
 			helpme
@@ -117,7 +333,15 @@ pre_clear_dumps()
 {
 	case "$FUNC" in
 		"all")
-			rm -rf $OUTFILE*
+			rm -rf $OUTFILE.log
+			rm -rf $OUTFILE.backup_governor.log
+			rm -rf *.png
+			;;
+
+		"tbench")
+			rm -rf $OUTFILE.log
+			rm -rf $OUTFILE.backup_governor.log
+			rm -rf tbench_*.png
 			;;
 
 		*)
@@ -128,6 +352,7 @@ pre_clear_dumps()
 post_clear_dumps()
 {
 	rm -rf $OUTFILE.log
+	rm -rf $OUTFILE.backup_governor.log
 }
 
 # Parse arguments
diff --git a/tools/testing/selftests/amd-pstate/tbench.sh b/tools/testing/selftests/amd-pstate/tbench.sh
new file mode 100755
index 000000000000..fd6e28139035
--- /dev/null
+++ b/tools/testing/selftests/amd-pstate/tbench.sh
@@ -0,0 +1,334 @@
+#!/bin/sh
+# SPDX-License-Identifier: GPL-2.0
+
+# Testing and monitor the cpu frequency and performance when
+# this script trigger tbench test.
+
+# protect against multiple inclusion
+if [ $FILE_TBENCH ]; then
+	return 0
+else
+	FILE_TBENCH=DONE
+fi
+
+tbench_governors=("ondemand" "schedutil")
+
+# $1: governor, $2: round, $3: des-perf, $4: freq, $5: load, $6: performance, $7: energy, $8: performance per watt
+store_csv_tbench()
+{
+	echo "$1, $2, $3, $4, $5, $6, $7, $8" | tee -a $OUTFILE_TBENCH.csv > /dev/null 2>&1
+}
+
+# clear some special lines
+clear_csv_tbench()
+{
+	if [ -f $OUTFILE_TBENCH.csv ]; then
+		sed -i '/Comprison(%)/d' $OUTFILE_TBENCH.csv
+		sed -i "/$(scaling_name)/d" $OUTFILE_TBENCH.csv
+	fi
+}
+
+# find string $1 in file csv and get the number of lines
+get_lines_csv_tbench()
+{
+	if [ -f $OUTFILE_TBENCH.csv ]; then
+		return `grep -c "$1" $OUTFILE_TBENCH.csv`
+	else
+		return 0
+	fi
+}
+
+pre_clear_tbench()
+{
+	post_clear_tbench
+	rm -rf tbench_*.png
+	clear_csv_tbench
+}
+
+post_clear_tbench()
+{
+	rm -rf results/tracer-tbench*
+	rm -rf $OUTFILE_TBENCH*.log
+	rm -rf $OUTFILE_TBENCH*.result
+
+}
+
+# $1: governor, $2: loop
+run_tbench()
+{
+	echo "Launching amd pstate tracer for $1 #$2 tracer_interval: $TRACER_INTERVAL"
+	./amd_pstate_trace.py -n tracer-tbench-$1-$2 -i $TRACER_INTERVAL > /dev/null 2>&1 &
+
+	printf "Test tbench for $1 #$2 time_limit: $TIME_LIMIT procs_num: $PROCESS_NUM\n"
+	tbench_srv > /dev/null 2>&1 &
+	perf stat -a --per-socket -I 1000 -e power/energy-pkg/ tbench -t $TIME_LIMIT $PROCESS_NUM > $OUTFILE_TBENCH-perf-$1-$2.log 2>&1
+
+	pid=`pidof tbench_srv`
+	kill $pid
+
+	for job in `jobs -p`
+	do
+		echo "Waiting for job id $job"
+		wait $job
+	done
+}
+
+# $1: governor, $2: loop
+parse_tbench()
+{
+	awk '{print $5}' results/tracer-tbench-$1-$2/cpu.csv | sed -e '1d' | sed s/,// > $OUTFILE_TBENCH-des-perf-$1-$2.log
+	avg_des_perf=$(awk 'BEGIN {i=0; sum=0};{i++; sum += $1};END {print sum/i}' $OUTFILE_TBENCH-des-perf-$1-$2.log)
+	printf "Tbench-$1-#$2 avg des perf: $avg_des_perf\n" | tee -a $OUTFILE_TBENCH.result
+
+	awk '{print $7}' results/tracer-tbench-$1-$2/cpu.csv | sed -e '1d' | sed s/,// > $OUTFILE_TBENCH-freq-$1-$2.log
+	avg_freq=$(awk 'BEGIN {i=0; sum=0};{i++; sum += $1};END {print sum/i}' $OUTFILE_TBENCH-freq-$1-$2.log)
+	printf "Tbench-$1-#$2 avg freq: $avg_freq\n" | tee -a $OUTFILE_TBENCH.result
+
+	awk '{print $11}' results/tracer-tbench-$1-$2/cpu.csv | sed -e '1d' | sed s/,// > $OUTFILE_TBENCH-load-$1-$2.log
+	avg_load=$(awk 'BEGIN {i=0; sum=0};{i++; sum += $1};END {print sum/i}' $OUTFILE_TBENCH-load-$1-$2.log)
+	printf "Tbench-$1-#$2 avg load: $avg_load\n" | tee -a $OUTFILE_TBENCH.result
+
+	grep Throughput $OUTFILE_TBENCH-perf-$1-$2.log | awk '{print $2}' > $OUTFILE_TBENCH-throughput-$1-$2.log
+	tp_sum=$(awk 'BEGIN {sum=0};{sum += $1};END {print sum}' $OUTFILE_TBENCH-throughput-$1-$2.log)
+	printf "Tbench-$1-#$2 throughput(MB/s): $tp_sum\n" | tee -a $OUTFILE_TBENCH.result
+
+	grep Joules $OUTFILE_TBENCH-perf-$1-$2.log | awk '{print $4}' > $OUTFILE_TBENCH-energy-$1-$2.log
+	en_sum=$(awk 'BEGIN {sum=0};{sum += $1};END {print sum}' $OUTFILE_TBENCH-energy-$1-$2.log)
+	printf "Tbench-$1-#$2 power consumption(J): $en_sum\n" | tee -a $OUTFILE_TBENCH.result
+
+	# Permance is throughput per second, denoted T/t, where T is throught rendered in t seconds.
+	# It is well known that P=E/t, where P is power measured in watts(W), E is energy measured in joules(J),
+	# and t is time measured in seconds(s). This means that performance per watt becomes
+	#       T/t   T/t    T
+	#       --- = --- = ---
+	#        P    E/t    E
+	# with unit given by MB per joule.
+	ppw=`echo "scale=4;($TIME_LIMIT-1)*$tp_sum/$en_sum" | bc | awk '{printf "%.4f", $0}'`
+	printf "Tbench-$1-#$2 performance per watt(MB/J): $ppw\n" | tee -a $OUTFILE_TBENCH.result
+	printf "\n" | tee -a $OUTFILE_TBENCH.result
+
+	driver_name=`echo $(scaling_name)`
+	store_csv_tbench "$driver_name-$1" $2 $avg_des_perf $avg_freq $avg_load $tp_sum $en_sum $ppw
+}
+
+# $1: governor
+loop_tbench()
+{
+	printf "\nTbench total test times is $LOOP_TIMES for $1\n\n"
+	for i in `seq 1 $LOOP_TIMES`
+	do
+		run_tbench $1 $i
+		parse_tbench $1 $i
+	done
+}
+
+# $1: governor
+gather_tbench()
+{
+	printf "Tbench test result for $1 (loops:$LOOP_TIMES)" | tee -a $OUTFILE_TBENCH.result
+	printf "\n--------------------------------------------------\n" | tee -a $OUTFILE_TBENCH.result
+
+	grep "Tbench-$1-#" $OUTFILE_TBENCH.result | grep "avg des perf:" | awk '{print $NF}' > $OUTFILE_TBENCH-des-perf-$1.log
+	avg_des_perf=$(awk 'BEGIN {sum=0};{sum += $1};END {print sum/'$LOOP_TIMES'}' $OUTFILE_TBENCH-des-perf-$1.log)
+	printf "Tbench-$1 avg des perf: $avg_des_perf\n" | tee -a $OUTFILE_TBENCH.result
+
+	grep "Tbench-$1-#" $OUTFILE_TBENCH.result | grep "avg freq:" | awk '{print $NF}' > $OUTFILE_TBENCH-freq-$1.log
+	avg_freq=$(awk 'BEGIN {sum=0};{sum += $1};END {print sum/'$LOOP_TIMES'}' $OUTFILE_TBENCH-freq-$1.log)
+	printf "Tbench-$1 avg freq: $avg_freq\n" | tee -a $OUTFILE_TBENCH.result
+
+	grep "Tbench-$1-#" $OUTFILE_TBENCH.result | grep "avg load:" | awk '{print $NF}' > $OUTFILE_TBENCH-load-$1.log
+	avg_load=$(awk 'BEGIN {sum=0};{sum += $1};END {print sum/'$LOOP_TIMES'}' $OUTFILE_TBENCH-load-$1.log)
+	printf "Tbench-$1 avg load: $avg_load\n" | tee -a $OUTFILE_TBENCH.result
+
+	grep "Tbench-$1-#" $OUTFILE_TBENCH.result | grep "throughput(MB/s):" | awk '{print $NF}' > $OUTFILE_TBENCH-throughput-$1.log
+	tp_sum=$(awk 'BEGIN {sum=0};{sum += $1};END {print sum}' $OUTFILE_TBENCH-throughput-$1.log)
+	printf "Tbench-$1 total throughput(MB/s): $tp_sum\n" | tee -a $OUTFILE_TBENCH.result
+
+	avg_tp=$(awk 'BEGIN {sum=0};{sum += $1};END {print sum/'$LOOP_TIMES'}' $OUTFILE_TBENCH-throughput-$1.log)
+	printf "Tbench-$1 avg throughput(MB/s): $avg_tp\n" | tee -a $OUTFILE_TBENCH.result
+
+	grep "Tbench-$1-#" $OUTFILE_TBENCH.result | grep "power consumption(J):" | awk '{print $NF}' > $OUTFILE_TBENCH-energy-$1.log
+	en_sum=$(awk 'BEGIN {sum=0};{sum += $1};END {print sum}' $OUTFILE_TBENCH-energy-$1.log)
+	printf "Tbench-$1 total power consumption(J): $en_sum\n" | tee -a $OUTFILE_TBENCH.result
+
+	avg_en=$(awk 'BEGIN {sum=0};{sum += $1};END {print sum/'$LOOP_TIMES'}' $OUTFILE_TBENCH-energy-$1.log)
+	printf "Tbench-$1 avg power consumption(J): $avg_en\n" | tee -a $OUTFILE_TBENCH.result
+
+	# Permance is throughput per second, denoted T/t, where T is throught rendered in t seconds.
+	# It is well known that P=E/t, where P is power measured in watts(W), E is energy measured in joules(J),
+	# and t is time measured in seconds(s). This means that performance per watt becomes
+	#       T/t   T/t    T
+	#       --- = --- = ---
+	#        P    E/t    E
+	# with unit given by MB per joule.
+	ppw=`echo "scale=4;($TIME_LIMIT-1)*$avg_tp/$avg_en" | bc | awk '{printf "%.4f", $0}'`
+	printf "Tbench-$1 performance per watt(MB/J): $ppw\n" | tee -a $OUTFILE_TBENCH.result
+	printf "\n" | tee -a $OUTFILE_TBENCH.result
+
+	driver_name=`echo $(scaling_name)`
+	store_csv_tbench "$driver_name-$1" "Average" $avg_des_perf $avg_freq $avg_load $avg_tp $avg_en $ppw
+}
+
+# $1: base scaling_driver $2: base governor $3: comparative scaling_driver $4: comparative governor
+__calc_comp_tbench()
+{
+	base=`grep "$1-$2" $OUTFILE_TBENCH.csv | grep "Average"`
+	comp=`grep "$3-$4" $OUTFILE_TBENCH.csv | grep "Average"`
+
+	if [ -n "$base" -a -n "$comp" ]; then
+		printf "\n==================================================\n" | tee -a $OUTFILE_TBENCH.result
+		printf "Tbench comparison $1-$2 VS $3-$4" | tee -a $OUTFILE_TBENCH.result
+		printf "\n==================================================\n" | tee -a $OUTFILE_TBENCH.result
+
+		# get the base values
+		des_perf_base=`echo "$base" | awk '{print $3}' | sed s/,//`
+		freq_base=`echo "$base" | awk '{print $4}' | sed s/,//`
+		load_base=`echo "$base" | awk '{print $5}' | sed s/,//`
+		perf_base=`echo "$base" | awk '{print $6}' | sed s/,//`
+		energy_base=`echo "$base" | awk '{print $7}' | sed s/,//`
+		ppw_base=`echo "$base" | awk '{print $8}' | sed s/,//`
+
+		# get the comparative values
+		des_perf_comp=`echo "$comp" | awk '{print $3}' | sed s/,//`
+		freq_comp=`echo "$comp" | awk '{print $4}' | sed s/,//`
+		load_comp=`echo "$comp" | awk '{print $5}' | sed s/,//`
+		perf_comp=`echo "$comp" | awk '{print $6}' | sed s/,//`
+		energy_comp=`echo "$comp" | awk '{print $7}' | sed s/,//`
+		ppw_comp=`echo "$comp" | awk '{print $8}' | sed s/,//`
+
+		# compare the base and comp values
+		des_perf_drop=`echo "scale=4;($des_perf_comp-$des_perf_base)*100/$des_perf_base" | bc | awk '{printf "%.4f", $0}'`
+		printf "Tbench-$1 des perf base: $des_perf_base comprison: $des_perf_comp percent: $des_perf_drop\n" | tee -a $OUTFILE_TBENCH.result
+
+		freq_drop=`echo "scale=4;($freq_comp-$freq_base)*100/$freq_base" | bc | awk '{printf "%.4f", $0}'`
+		printf "Tbench-$1 freq base: $freq_base comprison: $freq_comp percent: $freq_drop\n" | tee -a $OUTFILE_TBENCH.result
+
+		load_drop=`echo "scale=4;($load_comp-$load_base)*100/$load_base" | bc | awk '{printf "%.4f", $0}'`
+		printf "Tbench-$1 load base: $load_base comprison: $load_comp percent: $load_drop\n" | tee -a $OUTFILE_TBENCH.result
+
+		perf_drop=`echo "scale=4;($perf_comp-$perf_base)*100/$perf_base" | bc | awk '{printf "%.4f", $0}'`
+		printf "Tbench-$1 perf base: $perf_base comprison: $perf_comp percent: $perf_drop\n" | tee -a $OUTFILE_TBENCH.result
+
+		energy_drop=`echo "scale=4;($energy_comp-$energy_base)*100/$energy_base" | bc | awk '{printf "%.4f", $0}'`
+		printf "Tbench-$1 energy base: $energy_base comprison: $energy_comp percent: $energy_drop\n" | tee -a $OUTFILE_TBENCH.result
+
+		ppw_drop=`echo "scale=4;($ppw_comp-$ppw_base)*100/$ppw_base" | bc | awk '{printf "%.4f", $0}'`
+		printf "Tbench-$1 performance per watt base: $ppw_base comprison: $ppw_comp percent: $ppw_drop\n" | tee -a $OUTFILE_TBENCH.result
+		printf "\n" | tee -a $OUTFILE_TBENCH.result
+
+		store_csv_tbench "$1-$2 VS $3-$4" "Comprison(%)" "$des_perf_drop" "$freq_drop" "$load_drop" "$perf_drop" "$energy_drop" "$ppw_drop"
+	fi
+}
+
+# calculate the comparison(%)
+calc_comp_tbench()
+{
+	# acpi-cpufreq-ondemand VS acpi-cpufreq-schedutil
+	__calc_comp_tbench ${all_scaling_names[0]} ${tbench_governors[0]} ${all_scaling_names[0]} ${tbench_governors[1]}
+
+	# amd-pstate-ondemand VS amd-pstate-schedutil
+	__calc_comp_tbench ${all_scaling_names[1]} ${tbench_governors[0]} ${all_scaling_names[1]} ${tbench_governors[1]}
+
+	# acpi-cpufreq-ondemand VS amd-pstate-ondemand
+	__calc_comp_tbench ${all_scaling_names[0]} ${tbench_governors[0]} ${all_scaling_names[1]} ${tbench_governors[0]}
+
+	# acpi-cpufreq-schedutil VS amd-pstate-schedutil
+	__calc_comp_tbench ${all_scaling_names[0]} ${tbench_governors[1]} ${all_scaling_names[1]} ${tbench_governors[1]}
+}
+
+# $1: file_name, $2: title, $3: ylable, $4: column
+plot_png_tbench()
+{
+	# all_scaling_names[1] all_scaling_names[0] flag
+	#    amd-pstate           acpi-cpufreq
+	#         N                   N             0
+	#         N                   Y             1
+	#         Y                   N             2
+	#         Y                   Y             3
+	ret=`grep -c "${all_scaling_names[1]}" $OUTFILE_TBENCH.csv`
+	if [ $ret -eq 0 ]; then
+		ret=`grep -c "${all_scaling_names[0]}" $OUTFILE_TBENCH.csv`
+		if [ $ret -eq 0 ]; then
+			flag=0
+		else
+			flag=1
+		fi
+	else
+		ret=`grep -c "${all_scaling_names[0]}" $OUTFILE_TBENCH.csv`
+		if [ $ret -eq 0 ]; then
+			flag=2
+		else
+			flag=3
+		fi
+	fi
+
+	gnuplot << EOF
+		set term png
+		set output "$1"
+
+		set title "$2"
+		set xlabel "Test Cycles (round)"
+		set ylabel "$3"
+
+		set grid
+		set style data histogram
+		set style fill solid 0.5 border
+		set boxwidth 0.8
+
+		if ($flag == 1) {
+			plot \
+			"<(sed -n -e 's/,//g' -e '/${all_scaling_names[0]}-${tbench_governors[0]}/p' $OUTFILE_TBENCH.csv)" using $4:xtic(2) title "${all_scaling_names[0]}-${tbench_governors[0]}", \
+			"<(sed -n -e 's/,//g' -e '/${all_scaling_names[0]}-${tbench_governors[1]}/p' $OUTFILE_TBENCH.csv)" using $4:xtic(2) title "${all_scaling_names[0]}-${tbench_governors[1]}"
+		} else {
+			if ($flag == 2) {
+				plot \
+				"<(sed -n -e 's/,//g' -e '/${all_scaling_names[1]}-${tbench_governors[0]}/p' $OUTFILE_TBENCH.csv)" using $4:xtic(2) title "${all_scaling_names[1]}-${tbench_governors[0]}", \
+				"<(sed -n -e 's/,//g' -e '/${all_scaling_names[1]}-${tbench_governors[1]}/p' $OUTFILE_TBENCH.csv)" using $4:xtic(2) title "${all_scaling_names[1]}-${tbench_governors[1]}"
+			} else {
+				if ($flag == 3 ) {
+					plot \
+					"<(sed -n -e 's/,//g' -e '/${all_scaling_names[0]}-${tbench_governors[0]}/p' $OUTFILE_TBENCH.csv)" using $4:xtic(2) title "${all_scaling_names[0]}-${tbench_governors[0]}", \
+					"<(sed -n -e 's/,//g' -e '/${all_scaling_names[0]}-${tbench_governors[1]}/p' $OUTFILE_TBENCH.csv)" using $4:xtic(2) title "${all_scaling_names[0]}-${tbench_governors[1]}", \
+					"<(sed -n -e 's/,//g' -e '/${all_scaling_names[1]}-${tbench_governors[0]}/p' $OUTFILE_TBENCH.csv)" using $4:xtic(2) title "${all_scaling_names[1]}-${tbench_governors[0]}", \
+					"<(sed -n -e 's/,//g' -e '/${all_scaling_names[1]}-${tbench_governors[1]}/p' $OUTFILE_TBENCH.csv)" using $4:xtic(2) title "${all_scaling_names[1]}-${tbench_governors[1]}"
+				}
+			}
+		}
+		quit
+EOF
+}
+
+amd_pstate_tbench()
+{
+	printf "\n---------------------------------------------\n"
+	printf "*** Running tbench                        ***"
+	printf "\n---------------------------------------------\n"
+
+	pre_clear_tbench
+
+	#install_tbench
+
+	get_lines_csv_tbench "Governor"
+	if [ $? -eq 0 ]; then
+		# add titles and unit for csv file
+		store_csv_tbench "Governor" "Round" "Des-perf" "Freq" "Load" "Performance" "Energy" "Performance Per Watt"
+		store_csv_tbench "Unit" "" "" "GHz" "" "MB/s" "J" "MB/J"
+	fi
+
+	backup_governor
+	for governor in ${tbench_governors[*]} ; do
+		printf "\nSpecified governor is $governor\n\n"
+		switch_governor $governor
+		loop_tbench $governor
+		gather_tbench $governor
+	done
+	restore_governor
+
+	plot_png_tbench "tbench_perfromance.png" "Tbench Benchmark Performance" "Performance" 6
+	plot_png_tbench "tbench_energy.png" "Tbench Benchmark Energy" "Energy (J)" 7
+	plot_png_tbench "tbench_ppw.png" "Tbench Benchmark Performance Per Watt" "Performance Per Watt (MB/J)" 8
+
+	calc_comp_tbench
+
+	post_clear_tbench
+}
-- 
2.34.1

Re: [PATCH V4 2/4] selftests: amd-pstate: Trigger tbench benchmark and test cpus

[Shuah Khan]

On 10/23/22 19:33, Meng Li wrote:
> Add tbench.sh trigger the tbench testing and monitor the cpu desire
> performance, frequency, load, power consumption and throughput etc.

Does tbench.sh do the following? If so please state it clearly in the
chanelog.

> 1) Download and install tbench codes.
> 2) Run tbench benchmark on specific governors, ondemand or schedutil.
> 3) Run tbench benchmark comparative test on acpi-cpufreq kernel driver.
> 4) Get desire performance, frequency, load by perf.
> 5) Get power consumption and throughput by amd_pstate_trace.py.
> 6) Analyse test results and save it in file selftest.tbench.csv.
> 7) Plot png images about performance, energy and performance per watt
> for each test.
> 
> Signed-off-by: Meng Li <li.meng@amd.com>
> ---
>   tools/testing/selftests/amd-pstate/Makefile  |  10 +-
>   tools/testing/selftests/amd-pstate/run.sh    | 243 +++++++++++++-
>   tools/testing/selftests/amd-pstate/tbench.sh | 334 +++++++++++++++++++
>   3 files changed, 577 insertions(+), 10 deletions(-)
>   create mode 100755 tools/testing/selftests/amd-pstate/tbench.sh
> 
> diff --git a/tools/testing/selftests/amd-pstate/Makefile b/tools/testing/selftests/amd-pstate/Makefile
> index 6f4c7b01e3bb..cac8dedb7226 100644
> --- a/tools/testing/selftests/amd-pstate/Makefile
> +++ b/tools/testing/selftests/amd-pstate/Makefile
> @@ -4,7 +4,15 @@
>   # No binaries, but make sure arg-less "make" doesn't trigger "run_tests"
>   all:
>   
> +uname_M := $(shell uname -m 2>/dev/null || echo not)
> +ARCH ?= $(shell echo $(uname_M) | sed -e s/i.86/x86/ -e s/x86_64/x86/)
> +
> +ifeq (x86,$(ARCH))
> +TEST_GEN_FILES += ../../../power/x86/amd_pstate_tracer/amd_pstate_trace.py
> +TEST_GEN_FILES += ../../../power/x86/intel_pstate_tracer/intel_pstate_tracer.py
> +endif
> +
>   TEST_PROGS := run.sh
> -TEST_FILES := basic.sh
> +TEST_FILES := basic.sh tbench.sh
>   
>   include ../lib.mk
> diff --git a/tools/testing/selftests/amd-pstate/run.sh b/tools/testing/selftests/amd-pstate/run.sh
> index 715e9d01484f..dea61e4443fc 100755
> --- a/tools/testing/selftests/amd-pstate/run.sh
> +++ b/tools/testing/selftests/amd-pstate/run.sh
> @@ -9,6 +9,7 @@ else
>   fi
>   
>   source basic.sh
> +source tbench.sh
>   
>   # amd-pstate-ut only run on x86/x86_64 AMD systems.
>   ARCH=$(uname -m 2>/dev/null | sed -e 's/i.86/x86/' -e 's/x86_64/x86/')
> @@ -16,9 +17,98 @@ VENDOR=$(cat /proc/cpuinfo | grep -m 1 'vendor_id' | awk '{print $NF}')
>   
>   FUNC=all
>   OUTFILE=selftest
> +OUTFILE_TBENCH="$OUTFILE.tbench"
> +
> +SYSFS=
> +CPUROOT=
> +CPUFREQROOT=
> +MAKE_CPUS=
> +
> +TIME_LIMIT=100
> +PROCESS_NUM=128
> +LOOP_TIMES=3
> +TRACER_INTERVAL=10
> +CURRENT_TEST=amd-pstate
> +COMPARATIVE_TEST=
>   
>   # Kselftest framework requirement - SKIP code is 4.
>   ksft_skip=4
> +all_scaling_names=("acpi-cpufreq" "amd-pstate")
> +
> +# Get current cpufreq scaling driver name
> +scaling_name()
> +{
> +	if [ "$COMPARATIVE_TEST" = "" ]; then
> +		echo "$CURRENT_TEST"
> +	else
> +		echo "$COMPARATIVE_TEST"
> +	fi
> +}
> +
> +# Counts CPUs with cpufreq directories
> +count_cpus()
> +{
> +	count=0;
> +
> +	for cpu in `ls $CPUROOT | grep "cpu[0-9].*"`; do
> +		if [ -d $CPUROOT/$cpu/cpufreq ]; then
> +			let count=count+1;
> +		fi
> +	done
> +
> +	echo $count;
> +}
> +
> +# $1: policy
> +find_current_governor()
> +{
> +	cat $CPUFREQROOT/$1/scaling_governor
> +}
> +
> +backup_governor()
> +{
> +	policies=$(ls $CPUFREQROOT| grep "policy[0-9].*")
> +	for policy in $policies; do
> +		cur_gov=$(find_current_governor $policy)
> +		echo "$policy $cur_gov" >> $OUTFILE.backup_governor.log
> +	done
> +
> +	printf "Governor $cur_gov backup done.\n"
> +}
> +
> +restore_governor()
> +{
> +	i=0;
> +
> +	policies=$(awk '{print $1}' $OUTFILE.backup_governor.log)
> +	for policy in $policies; do
> +		let i++;
> +		governor=$(sed -n ''$i'p' $OUTFILE.backup_governor.log | awk '{print $2}')
> +
> +		# switch governor
> +		echo $governor > $CPUFREQROOT/$policy/scaling_governor
> +	done
> +
> +	printf "Governor restored to $governor.\n"
> +}
> +
> +# $1: governor
> +switch_governor()
> +{
> +	policies=$(ls $CPUFREQROOT| grep "policy[0-9].*")
> +	for policy in $policies; do
> +		filepath=$CPUFREQROOT/$policy/scaling_available_governors
> +
> +		# Exit if cpu isn't managed by cpufreq core
> +		if [ ! -f $filepath ]; then
> +			return;
> +		fi
> +
> +		echo $1 > $CPUFREQROOT/$policy/scaling_governor
> +	done
> +
> +	printf "Switched governor to $1.\n"
> +}
>   
>   # All amd-pstate tests
>   amd_pstate_all()
> @@ -27,8 +117,19 @@ amd_pstate_all()
>   	printf "***** Running AMD P-state Sanity Tests  *****\n"
>   	printf "=============================================\n\n"
>   
> +	count=$(count_cpus)
> +	if [ $count = 0 ]; then
> +		printf "No cpu is managed by cpufreq core, exiting\n"
> +		exit;
> +	else
> +		printf "AMD P-state manages: $count CPUs\n"
> +	fi
> +
>   	# unit test for amd-pstate kernel driver
>   	amd_pstate_basic
> +
> +	# tbench
> +	amd_pstate_tbench
>   }
>   
>   helpme()
Change this to help() which is standard way to name this routine.

> @@ -37,21 +138,27 @@ helpme()
>   	[-h <help>]
>   	[-o <output-file-for-dump>]
>   	[-c <all: All testing,
> -	     basic: Basic testing.>]
> +	     basic: Basic testing,
> +	     tbench: Tbench testing.>]
> +	[-t <tbench time limit>]
> +	[-p <tbench process number>]
> +	[-l <loop times for tbench>]
> +	[-i <amd tracer interval>]
> +	[-m <comparative test: acpi-cpufreq>]
>   	\n"
>   	exit 2
>   }
>   
>   parse_arguments()
>   {
> -	while getopts ho:c: arg
> +	while getopts ho:c:t:p:l:i:m: arg
>   	do
>   		case $arg in
>   			h) # --help
>   				helpme

Same here.

>   				;;
>   
> -			c) # --func_type (Function to perform: basic (default: all))
> +			c) # --func_type (Function to perform: basic, tbench (default: all))
>   				FUNC=$OPTARG
>   				;;
>   
> @@ -59,6 +166,26 @@ parse_arguments()
>   				OUTFILE=$OPTARG
>   				;;
>   
> +			t) # --tbench-time-limit
> +				TIME_LIMIT=$OPTARG
> +				;;
> +
> +			p) # --tbench-process-number
> +				PROCESS_NUM=$OPTARG
> +				;;
> +
> +			l) # --tbench-loop-times
> +				LOOP_TIMES=$OPTARG
> +				;;
> +
> +			i) # --amd-tracer-interval
> +				TRACER_INTERVAL=$OPTARG
> +				;;
> +
> +			m) # --comparative-test
> +				COMPARATIVE_TEST=$OPTARG
> +				;;
> +
>   			*)
>   				helpme

Same here

>   				;;
> @@ -66,6 +193,32 @@ parse_arguments()
>   	done
>   }
>   
> +command_perf()
> +{
> +	if ! command -v perf > /dev/null; then
> +		echo $msg please install perf. >&2
> +		exit $ksft_skip
> +	fi
> +}
> +
> +command_tbench()
> +{
> +	if ! command -v tbench > /dev/null; then
> +		if apt policy dbench > /dev/null 2>&1; then
> +			printf "Install dbench, please wait a moment ...\n"
> +			sudo apt install dbench > /dev/null 2>&1
> +		elif yum list available | grep dbench > /dev/null 2>&1; then
> +			printf "Install dbench, please wait a moment ...\n"
> +			sudo yum install dbench > /dev/null 2>&1

This install requires user interaction. Do you expect this to work in kernel ci
type environment?

> +		fi
> +	fi
> +
> +	if ! command -v tbench > /dev/null; then
> +		echo $msg please install tbench. >&2
> +		exit $ksft_skip
> +	fi
> +}
> +
>   prerequisite()
>   {
>   	if ! echo "$ARCH" | grep -q x86; then
> @@ -80,11 +233,29 @@ prerequisite()
>   	fi
>   
>   	scaling_driver=$(cat /sys/devices/system/cpu/cpufreq/policy0/scaling_driver)
> -	if [ "$scaling_driver" != "amd-pstate" ]; then
> -		echo "$0 # Skipped: Test can only run on amd-pstate driver."
> -		echo "$0 # Please set X86_AMD_PSTATE enabled."
> -		echo "$0 # Current cpufreq scaling drvier is $scaling_driver."
> -		exit $ksft_skip
> +	if [ "$COMPARATIVE_TEST" = "" ]; then
> +		if [ "$scaling_driver" != "$CURRENT_TEST" ]; then
> +			echo "$0 # Skipped: Test can only run on $CURRENT_TEST driver or run comparative test."
> +			echo "$0 # Please set X86_AMD_PSTATE enabled or run comparative test."
> +			echo "$0 # Current cpufreq scaling drvier is $scaling_driver."
> +			exit $ksft_skip
> +		fi
> +	else
> +		case "$FUNC" in
> +			"tbench")
> +				if [ "$scaling_driver" != "$COMPARATIVE_TEST" ]; then
> +					echo "$0 # Skipped: Comparison test can only run on $COMPARATIVE_TEST driver."
> +					echo "$0 # Current cpufreq scaling drvier is $scaling_driver."
> +					exit $ksft_skip
> +				fi
> +				;;
> +
> +			*)
> +				echo "$0 # Skipped: Comparison test are only for tbench."
> +				echo "$0 # Current comparative test is for $FUNC."
> +				exit $ksft_skip
> +				;;
> +		esac
>   	fi
>   
>   	msg="Skip all tests:"
> @@ -92,10 +263,51 @@ prerequisite()
>   		echo $msg please run this as root >&2
>   		exit $ksft_skip
>   	fi
> +
> +	case "$FUNC" in
> +		"all")
> +			command_perf
> +			command_tbench
> +			;;
> +
> +		"tbench")
> +			command_perf
> +			command_tbench
> +			;;
> +	esac
> +
> +	SYSFS=`mount -t sysfs | head -1 | awk '{ print $3 }'`
> +
> +	if [ ! -d "$SYSFS" ]; then
> +		echo $msg sysfs is not mounted >&2
> +		exit 2
> +	fi
> +
> +	CPUROOT=$SYSFS/devices/system/cpu
> +	CPUFREQROOT="$CPUROOT/cpufreq"
> +
> +	if ! ls $CPUROOT/cpu* > /dev/null 2>&1; then
> +		echo $msg cpus not available in sysfs >&2
> +		exit 2
> +	fi
> +
> +	if ! ls $CPUROOT/cpufreq > /dev/null 2>&1; then
> +		echo $msg cpufreq directory not available in sysfs >&2
> +		exit 2
> +	fi
>   }
>   
>   do_test()
>   {
> +	# Check if CPUs are managed by cpufreq or not
> +	count=$(count_cpus)
> +	MAKE_CPUS=$((count*2))
> +
> +	if [ $count = 0 ]; then
> +		echo "No cpu is managed by cpufreq core, exiting"
> +		exit 2;
> +	fi
> +
>   	case "$FUNC" in
>   		"all")
>   			amd_pstate_all
> @@ -105,6 +317,10 @@ do_test()
>   			amd_pstate_basic
>   			;;
>   
> +		"tbench")
> +			amd_pstate_tbench
> +			;;
> +
>   		*)
>   			echo "Invalid [-f] function type"
>   			helpme

Here

> @@ -117,7 +333,15 @@ pre_clear_dumps()
>   {
>   	case "$FUNC" in
>   		"all")
> -			rm -rf $OUTFILE*
> +			rm -rf $OUTFILE.log
> +			rm -rf $OUTFILE.backup_governor.log
> +			rm -rf *.png
> +			;;
> +
> +		"tbench")
> +			rm -rf $OUTFILE.log
> +			rm -rf $OUTFILE.backup_governor.log
> +			rm -rf tbench_*.png
>   			;;
>   
>   		*)
> @@ -128,6 +352,7 @@ pre_clear_dumps()
>   post_clear_dumps()
>   {
>   	rm -rf $OUTFILE.log
> +	rm -rf $OUTFILE.backup_governor.log
>   }
>   
>   # Parse arguments
> diff --git a/tools/testing/selftests/amd-pstate/tbench.sh b/tools/testing/selftests/amd-pstate/tbench.sh
> new file mode 100755
> index 000000000000..fd6e28139035
> --- /dev/null
> +++ b/tools/testing/selftests/amd-pstate/tbench.sh
> @@ -0,0 +1,334 @@
> +#!/bin/sh
> +# SPDX-License-Identifier: GPL-2.0
> +
> +# Testing and monitor the cpu frequency and performance when
> +# this script trigger tbench test.
> +
> +# protect against multiple inclusion
> +if [ $FILE_TBENCH ]; then
> +	return 0
> +else
> +	FILE_TBENCH=DONE
> +fi
> +
> +tbench_governors=("ondemand" "schedutil")
> +
> +# $1: governor, $2: round, $3: des-perf, $4: freq, $5: load, $6: performance, $7: energy, $8: performance per watt
> +store_csv_tbench()
> +{
> +	echo "$1, $2, $3, $4, $5, $6, $7, $8" | tee -a $OUTFILE_TBENCH.csv > /dev/null 2>&1
> +}
> +
> +# clear some special lines
> +clear_csv_tbench()
> +{
> +	if [ -f $OUTFILE_TBENCH.csv ]; then
> +		sed -i '/Comprison(%)/d' $OUTFILE_TBENCH.csv
> +		sed -i "/$(scaling_name)/d" $OUTFILE_TBENCH.csv
> +	fi
> +}
> +
> +# find string $1 in file csv and get the number of lines
> +get_lines_csv_tbench()
> +{
> +	if [ -f $OUTFILE_TBENCH.csv ]; then
> +		return `grep -c "$1" $OUTFILE_TBENCH.csv`
> +	else
> +		return 0
> +	fi
> +}
> +
> +pre_clear_tbench()
> +{
> +	post_clear_tbench
> +	rm -rf tbench_*.png
> +	clear_csv_tbench
> +}
> +
> +post_clear_tbench()
> +{
> +	rm -rf results/tracer-tbench*
> +	rm -rf $OUTFILE_TBENCH*.log
> +	rm -rf $OUTFILE_TBENCH*.result
> +
> +}
> +
> +# $1: governor, $2: loop
> +run_tbench()
> +{
> +	echo "Launching amd pstate tracer for $1 #$2 tracer_interval: $TRACER_INTERVAL"
> +	./amd_pstate_trace.py -n tracer-tbench-$1-$2 -i $TRACER_INTERVAL > /dev/null 2>&1 &
> +
> +	printf "Test tbench for $1 #$2 time_limit: $TIME_LIMIT procs_num: $PROCESS_NUM\n"
> +	tbench_srv > /dev/null 2>&1 &
> +	perf stat -a --per-socket -I 1000 -e power/energy-pkg/ tbench -t $TIME_LIMIT $PROCESS_NUM > $OUTFILE_TBENCH-perf-$1-$2.log 2>&1
> +
> +	pid=`pidof tbench_srv`
> +	kill $pid
> +
> +	for job in `jobs -p`
> +	do
> +		echo "Waiting for job id $job"
> +		wait $job
> +	done
> +}
> +
> +# $1: governor, $2: loop
> +parse_tbench()
> +{
> +	awk '{print $5}' results/tracer-tbench-$1-$2/cpu.csv | sed -e '1d' | sed s/,// > $OUTFILE_TBENCH-des-perf-$1-$2.log
> +	avg_des_perf=$(awk 'BEGIN {i=0; sum=0};{i++; sum += $1};END {print sum/i}' $OUTFILE_TBENCH-des-perf-$1-$2.log)
> +	printf "Tbench-$1-#$2 avg des perf: $avg_des_perf\n" | tee -a $OUTFILE_TBENCH.result
> +
> +	awk '{print $7}' results/tracer-tbench-$1-$2/cpu.csv | sed -e '1d' | sed s/,// > $OUTFILE_TBENCH-freq-$1-$2.log
> +	avg_freq=$(awk 'BEGIN {i=0; sum=0};{i++; sum += $1};END {print sum/i}' $OUTFILE_TBENCH-freq-$1-$2.log)
> +	printf "Tbench-$1-#$2 avg freq: $avg_freq\n" | tee -a $OUTFILE_TBENCH.result
> +
> +	awk '{print $11}' results/tracer-tbench-$1-$2/cpu.csv | sed -e '1d' | sed s/,// > $OUTFILE_TBENCH-load-$1-$2.log
> +	avg_load=$(awk 'BEGIN {i=0; sum=0};{i++; sum += $1};END {print sum/i}' $OUTFILE_TBENCH-load-$1-$2.log)
> +	printf "Tbench-$1-#$2 avg load: $avg_load\n" | tee -a $OUTFILE_TBENCH.result
> +
> +	grep Throughput $OUTFILE_TBENCH-perf-$1-$2.log | awk '{print $2}' > $OUTFILE_TBENCH-throughput-$1-$2.log
> +	tp_sum=$(awk 'BEGIN {sum=0};{sum += $1};END {print sum}' $OUTFILE_TBENCH-throughput-$1-$2.log)
> +	printf "Tbench-$1-#$2 throughput(MB/s): $tp_sum\n" | tee -a $OUTFILE_TBENCH.result
> +
> +	grep Joules $OUTFILE_TBENCH-perf-$1-$2.log | awk '{print $4}' > $OUTFILE_TBENCH-energy-$1-$2.log
> +	en_sum=$(awk 'BEGIN {sum=0};{sum += $1};END {print sum}' $OUTFILE_TBENCH-energy-$1-$2.log)
> +	printf "Tbench-$1-#$2 power consumption(J): $en_sum\n" | tee -a $OUTFILE_TBENCH.result
> +
> +	# Permance is throughput per second, denoted T/t, where T is throught rendered in t seconds.
> +	# It is well known that P=E/t, where P is power measured in watts(W), E is energy measured in joules(J),
> +	# and t is time measured in seconds(s). This means that performance per watt becomes
> +	#       T/t   T/t    T
> +	#       --- = --- = ---
> +	#        P    E/t    E
> +	# with unit given by MB per joule.
> +	ppw=`echo "scale=4;($TIME_LIMIT-1)*$tp_sum/$en_sum" | bc | awk '{printf "%.4f", $0}'`
> +	printf "Tbench-$1-#$2 performance per watt(MB/J): $ppw\n" | tee -a $OUTFILE_TBENCH.result
> +	printf "\n" | tee -a $OUTFILE_TBENCH.result
> +
> +	driver_name=`echo $(scaling_name)`
> +	store_csv_tbench "$driver_name-$1" $2 $avg_des_perf $avg_freq $avg_load $tp_sum $en_sum $ppw
> +}
> +
> +# $1: governor
> +loop_tbench()
> +{
> +	printf "\nTbench total test times is $LOOP_TIMES for $1\n\n"
> +	for i in `seq 1 $LOOP_TIMES`
> +	do
> +		run_tbench $1 $i
> +		parse_tbench $1 $i
> +	done
> +}
> +
> +# $1: governor
> +gather_tbench()
> +{
> +	printf "Tbench test result for $1 (loops:$LOOP_TIMES)" | tee -a $OUTFILE_TBENCH.result
> +	printf "\n--------------------------------------------------\n" | tee -a $OUTFILE_TBENCH.result
> +
> +	grep "Tbench-$1-#" $OUTFILE_TBENCH.result | grep "avg des perf:" | awk '{print $NF}' > $OUTFILE_TBENCH-des-perf-$1.log
> +	avg_des_perf=$(awk 'BEGIN {sum=0};{sum += $1};END {print sum/'$LOOP_TIMES'}' $OUTFILE_TBENCH-des-perf-$1.log)
> +	printf "Tbench-$1 avg des perf: $avg_des_perf\n" | tee -a $OUTFILE_TBENCH.result
> +
> +	grep "Tbench-$1-#" $OUTFILE_TBENCH.result | grep "avg freq:" | awk '{print $NF}' > $OUTFILE_TBENCH-freq-$1.log
> +	avg_freq=$(awk 'BEGIN {sum=0};{sum += $1};END {print sum/'$LOOP_TIMES'}' $OUTFILE_TBENCH-freq-$1.log)
> +	printf "Tbench-$1 avg freq: $avg_freq\n" | tee -a $OUTFILE_TBENCH.result
> +
> +	grep "Tbench-$1-#" $OUTFILE_TBENCH.result | grep "avg load:" | awk '{print $NF}' > $OUTFILE_TBENCH-load-$1.log
> +	avg_load=$(awk 'BEGIN {sum=0};{sum += $1};END {print sum/'$LOOP_TIMES'}' $OUTFILE_TBENCH-load-$1.log)
> +	printf "Tbench-$1 avg load: $avg_load\n" | tee -a $OUTFILE_TBENCH.result
> +
> +	grep "Tbench-$1-#" $OUTFILE_TBENCH.result | grep "throughput(MB/s):" | awk '{print $NF}' > $OUTFILE_TBENCH-throughput-$1.log
> +	tp_sum=$(awk 'BEGIN {sum=0};{sum += $1};END {print sum}' $OUTFILE_TBENCH-throughput-$1.log)
> +	printf "Tbench-$1 total throughput(MB/s): $tp_sum\n" | tee -a $OUTFILE_TBENCH.result
> +
> +	avg_tp=$(awk 'BEGIN {sum=0};{sum += $1};END {print sum/'$LOOP_TIMES'}' $OUTFILE_TBENCH-throughput-$1.log)
> +	printf "Tbench-$1 avg throughput(MB/s): $avg_tp\n" | tee -a $OUTFILE_TBENCH.result
> +
> +	grep "Tbench-$1-#" $OUTFILE_TBENCH.result | grep "power consumption(J):" | awk '{print $NF}' > $OUTFILE_TBENCH-energy-$1.log
> +	en_sum=$(awk 'BEGIN {sum=0};{sum += $1};END {print sum}' $OUTFILE_TBENCH-energy-$1.log)
> +	printf "Tbench-$1 total power consumption(J): $en_sum\n" | tee -a $OUTFILE_TBENCH.result
> +
> +	avg_en=$(awk 'BEGIN {sum=0};{sum += $1};END {print sum/'$LOOP_TIMES'}' $OUTFILE_TBENCH-energy-$1.log)
> +	printf "Tbench-$1 avg power consumption(J): $avg_en\n" | tee -a $OUTFILE_TBENCH.result
> +
> +	# Permance is throughput per second, denoted T/t, where T is throught rendered in t seconds.
> +	# It is well known that P=E/t, where P is power measured in watts(W), E is energy measured in joules(J),
> +	# and t is time measured in seconds(s). This means that performance per watt becomes
> +	#       T/t   T/t    T
> +	#       --- = --- = ---
> +	#        P    E/t    E
> +	# with unit given by MB per joule.
> +	ppw=`echo "scale=4;($TIME_LIMIT-1)*$avg_tp/$avg_en" | bc | awk '{printf "%.4f", $0}'`
> +	printf "Tbench-$1 performance per watt(MB/J): $ppw\n" | tee -a $OUTFILE_TBENCH.result
> +	printf "\n" | tee -a $OUTFILE_TBENCH.result
> +
> +	driver_name=`echo $(scaling_name)`
> +	store_csv_tbench "$driver_name-$1" "Average" $avg_des_perf $avg_freq $avg_load $avg_tp $avg_en $ppw
> +}
> +
> +# $1: base scaling_driver $2: base governor $3: comparative scaling_driver $4: comparative governor
> +__calc_comp_tbench()
> +{
> +	base=`grep "$1-$2" $OUTFILE_TBENCH.csv | grep "Average"`
> +	comp=`grep "$3-$4" $OUTFILE_TBENCH.csv | grep "Average"`
> +
> +	if [ -n "$base" -a -n "$comp" ]; then
> +		printf "\n==================================================\n" | tee -a $OUTFILE_TBENCH.result
> +		printf "Tbench comparison $1-$2 VS $3-$4" | tee -a $OUTFILE_TBENCH.result
> +		printf "\n==================================================\n" | tee -a $OUTFILE_TBENCH.result
> +
> +		# get the base values
> +		des_perf_base=`echo "$base" | awk '{print $3}' | sed s/,//`
> +		freq_base=`echo "$base" | awk '{print $4}' | sed s/,//`
> +		load_base=`echo "$base" | awk '{print $5}' | sed s/,//`
> +		perf_base=`echo "$base" | awk '{print $6}' | sed s/,//`
> +		energy_base=`echo "$base" | awk '{print $7}' | sed s/,//`
> +		ppw_base=`echo "$base" | awk '{print $8}' | sed s/,//`
> +
> +		# get the comparative values
> +		des_perf_comp=`echo "$comp" | awk '{print $3}' | sed s/,//`
> +		freq_comp=`echo "$comp" | awk '{print $4}' | sed s/,//`
> +		load_comp=`echo "$comp" | awk '{print $5}' | sed s/,//`
> +		perf_comp=`echo "$comp" | awk '{print $6}' | sed s/,//`
> +		energy_comp=`echo "$comp" | awk '{print $7}' | sed s/,//`
> +		ppw_comp=`echo "$comp" | awk '{print $8}' | sed s/,//`
> +
> +		# compare the base and comp values
> +		des_perf_drop=`echo "scale=4;($des_perf_comp-$des_perf_base)*100/$des_perf_base" | bc | awk '{printf "%.4f", $0}'`
> +		printf "Tbench-$1 des perf base: $des_perf_base comprison: $des_perf_comp percent: $des_perf_drop\n" | tee -a $OUTFILE_TBENCH.result
> +
> +		freq_drop=`echo "scale=4;($freq_comp-$freq_base)*100/$freq_base" | bc | awk '{printf "%.4f", $0}'`
> +		printf "Tbench-$1 freq base: $freq_base comprison: $freq_comp percent: $freq_drop\n" | tee -a $OUTFILE_TBENCH.result
> +
> +		load_drop=`echo "scale=4;($load_comp-$load_base)*100/$load_base" | bc | awk '{printf "%.4f", $0}'`
> +		printf "Tbench-$1 load base: $load_base comprison: $load_comp percent: $load_drop\n" | tee -a $OUTFILE_TBENCH.result
> +
> +		perf_drop=`echo "scale=4;($perf_comp-$perf_base)*100/$perf_base" | bc | awk '{printf "%.4f", $0}'`
> +		printf "Tbench-$1 perf base: $perf_base comprison: $perf_comp percent: $perf_drop\n" | tee -a $OUTFILE_TBENCH.result
> +
> +		energy_drop=`echo "scale=4;($energy_comp-$energy_base)*100/$energy_base" | bc | awk '{printf "%.4f", $0}'`
> +		printf "Tbench-$1 energy base: $energy_base comprison: $energy_comp percent: $energy_drop\n" | tee -a $OUTFILE_TBENCH.result
> +
> +		ppw_drop=`echo "scale=4;($ppw_comp-$ppw_base)*100/$ppw_base" | bc | awk '{printf "%.4f", $0}'`
> +		printf "Tbench-$1 performance per watt base: $ppw_base comprison: $ppw_comp percent: $ppw_drop\n" | tee -a $OUTFILE_TBENCH.result
> +		printf "\n" | tee -a $OUTFILE_TBENCH.result
> +
> +		store_csv_tbench "$1-$2 VS $3-$4" "Comprison(%)" "$des_perf_drop" "$freq_drop" "$load_drop" "$perf_drop" "$energy_drop" "$ppw_drop"
> +	fi
> +}
> +
> +# calculate the comparison(%)
> +calc_comp_tbench()
> +{
> +	# acpi-cpufreq-ondemand VS acpi-cpufreq-schedutil
> +	__calc_comp_tbench ${all_scaling_names[0]} ${tbench_governors[0]} ${all_scaling_names[0]} ${tbench_governors[1]}
> +
> +	# amd-pstate-ondemand VS amd-pstate-schedutil
> +	__calc_comp_tbench ${all_scaling_names[1]} ${tbench_governors[0]} ${all_scaling_names[1]} ${tbench_governors[1]}
> +
> +	# acpi-cpufreq-ondemand VS amd-pstate-ondemand
> +	__calc_comp_tbench ${all_scaling_names[0]} ${tbench_governors[0]} ${all_scaling_names[1]} ${tbench_governors[0]}
> +
> +	# acpi-cpufreq-schedutil VS amd-pstate-schedutil
> +	__calc_comp_tbench ${all_scaling_names[0]} ${tbench_governors[1]} ${all_scaling_names[1]} ${tbench_governors[1]}
> +}
> +
> +# $1: file_name, $2: title, $3: ylable, $4: column
> +plot_png_tbench()
> +{
> +	# all_scaling_names[1] all_scaling_names[0] flag
> +	#    amd-pstate           acpi-cpufreq
> +	#         N                   N             0
> +	#         N                   Y             1
> +	#         Y                   N             2
> +	#         Y                   Y             3
> +	ret=`grep -c "${all_scaling_names[1]}" $OUTFILE_TBENCH.csv`
> +	if [ $ret -eq 0 ]; then
> +		ret=`grep -c "${all_scaling_names[0]}" $OUTFILE_TBENCH.csv`
> +		if [ $ret -eq 0 ]; then
> +			flag=0
> +		else
> +			flag=1
> +		fi
> +	else
> +		ret=`grep -c "${all_scaling_names[0]}" $OUTFILE_TBENCH.csv`
> +		if [ $ret -eq 0 ]; then
> +			flag=2
> +		else
> +			flag=3
> +		fi
> +	fi
> +
> +	gnuplot << EOF
> +		set term png
> +		set output "$1"
> +
> +		set title "$2"
> +		set xlabel "Test Cycles (round)"
> +		set ylabel "$3"
> +
> +		set grid
> +		set style data histogram
> +		set style fill solid 0.5 border
> +		set boxwidth 0.8
> +
> +		if ($flag == 1) {
> +			plot \
> +			"<(sed -n -e 's/,//g' -e '/${all_scaling_names[0]}-${tbench_governors[0]}/p' $OUTFILE_TBENCH.csv)" using $4:xtic(2) title "${all_scaling_names[0]}-${tbench_governors[0]}", \
> +			"<(sed -n -e 's/,//g' -e '/${all_scaling_names[0]}-${tbench_governors[1]}/p' $OUTFILE_TBENCH.csv)" using $4:xtic(2) title "${all_scaling_names[0]}-${tbench_governors[1]}"
> +		} else {
> +			if ($flag == 2) {
> +				plot \
> +				"<(sed -n -e 's/,//g' -e '/${all_scaling_names[1]}-${tbench_governors[0]}/p' $OUTFILE_TBENCH.csv)" using $4:xtic(2) title "${all_scaling_names[1]}-${tbench_governors[0]}", \
> +				"<(sed -n -e 's/,//g' -e '/${all_scaling_names[1]}-${tbench_governors[1]}/p' $OUTFILE_TBENCH.csv)" using $4:xtic(2) title "${all_scaling_names[1]}-${tbench_governors[1]}"
> +			} else {
> +				if ($flag == 3 ) {
> +					plot \
> +					"<(sed -n -e 's/,//g' -e '/${all_scaling_names[0]}-${tbench_governors[0]}/p' $OUTFILE_TBENCH.csv)" using $4:xtic(2) title "${all_scaling_names[0]}-${tbench_governors[0]}", \
> +					"<(sed -n -e 's/,//g' -e '/${all_scaling_names[0]}-${tbench_governors[1]}/p' $OUTFILE_TBENCH.csv)" using $4:xtic(2) title "${all_scaling_names[0]}-${tbench_governors[1]}", \
> +					"<(sed -n -e 's/,//g' -e '/${all_scaling_names[1]}-${tbench_governors[0]}/p' $OUTFILE_TBENCH.csv)" using $4:xtic(2) title "${all_scaling_names[1]}-${tbench_governors[0]}", \
> +					"<(sed -n -e 's/,//g' -e '/${all_scaling_names[1]}-${tbench_governors[1]}/p' $OUTFILE_TBENCH.csv)" using $4:xtic(2) title "${all_scaling_names[1]}-${tbench_governors[1]}"
> +				}
> +			}
> +		}
> +		quit
> +EOF
> +}
> +
> +amd_pstate_tbench()
> +{
> +	printf "\n---------------------------------------------\n"
> +	printf "*** Running tbench                        ***"
> +	printf "\n---------------------------------------------\n"
> +
> +	pre_clear_tbench
> +
> +	#install_tbench
> +
> +	get_lines_csv_tbench "Governor"
> +	if [ $? -eq 0 ]; then
> +		# add titles and unit for csv file
> +		store_csv_tbench "Governor" "Round" "Des-perf" "Freq" "Load" "Performance" "Energy" "Performance Per Watt"
> +		store_csv_tbench "Unit" "" "" "GHz" "" "MB/s" "J" "MB/J"
> +	fi
> +
> +	backup_governor
> +	for governor in ${tbench_governors[*]} ; do
> +		printf "\nSpecified governor is $governor\n\n"
> +		switch_governor $governor
> +		loop_tbench $governor
> +		gather_tbench $governor
> +	done
> +	restore_governor
> +
> +	plot_png_tbench "tbench_perfromance.png" "Tbench Benchmark Performance" "Performance" 6
> +	plot_png_tbench "tbench_energy.png" "Tbench Benchmark Energy" "Energy (J)" 7
> +	plot_png_tbench "tbench_ppw.png" "Tbench Benchmark Performance Per Watt" "Performance Per Watt (MB/J)" 8
> +
> +	calc_comp_tbench
> +
> +	post_clear_tbench
> +}

thanks,
-- Shuah

[PATCH V4 3/4] selftests: amd-pstate: Trigger gitsource benchmark and test cpus

[Meng Li]

Add gitsource.sh trigger the gitsource testing and monitor the cpu desire
performance, frequency, load, power consumption and throughput etc.
1) Download and tar gitsource codes.
2) Run gitsource benchmark on specific governors, ondemand or schedutil.
3) Run tbench benchmark comparative test on acpi-cpufreq kernel driver.
4) Get desire performance, frequency, load by perf.
5) Get power consumption and throughput by amd_pstate_trace.py.
6) Get run time by /usr/bin/time.
7) Analyse test results and save it in file selftest.gitsource.csv.
8) Plot png images about time, energy and performance per watt
for each test.

Signed-off-by: Meng Li <li.meng@amd.com>
---
 tools/testing/selftests/amd-pstate/Makefile   |   2 +-
 .../testing/selftests/amd-pstate/gitsource.sh | 345 ++++++++++++++++++
 tools/testing/selftests/amd-pstate/run.sh     |  32 +-
 3 files changed, 372 insertions(+), 7 deletions(-)
 create mode 100755 tools/testing/selftests/amd-pstate/gitsource.sh

diff --git a/tools/testing/selftests/amd-pstate/Makefile b/tools/testing/selftests/amd-pstate/Makefile
index cac8dedb7226..5f195ee756d6 100644
--- a/tools/testing/selftests/amd-pstate/Makefile
+++ b/tools/testing/selftests/amd-pstate/Makefile
@@ -13,6 +13,6 @@ TEST_GEN_FILES += ../../../power/x86/intel_pstate_tracer/intel_pstate_tracer.py
 endif
 
 TEST_PROGS := run.sh
-TEST_FILES := basic.sh tbench.sh
+TEST_FILES := basic.sh tbench.sh gitsource.sh
 
 include ../lib.mk
diff --git a/tools/testing/selftests/amd-pstate/gitsource.sh b/tools/testing/selftests/amd-pstate/gitsource.sh
new file mode 100755
index 000000000000..a9ad9388eb7b
--- /dev/null
+++ b/tools/testing/selftests/amd-pstate/gitsource.sh
@@ -0,0 +1,345 @@
+#!/bin/sh
+# SPDX-License-Identifier: GPL-2.0
+
+# Testing and monitor the cpu frequency and performance when
+# this script trigger gitsource test.
+
+# protect against multiple inclusion
+if [ $FILE_GITSOURCE ]; then
+	return 0
+else
+	FILE_GITSOURCE=DONE
+fi
+
+git_name="git-2.15.1"
+git_tar="$git_name.tar.gz"
+gitsource_url="https://github.com/git/git/archive/refs/tags/v2.15.1.tar.gz"
+gitsource_governors=("ondemand" "schedutil")
+
+# $1: governor, $2: round, $3: des-perf, $4: freq, $5: load, $6: time $7: energy, $8: PPW
+store_csv_gitsource()
+{
+	echo "$1, $2, $3, $4, $5, $6, $7, $8" | tee -a $OUTFILE_GIT.csv > /dev/null 2>&1
+}
+
+# clear some special lines
+clear_csv_gitsource()
+{
+	if [ -f $OUTFILE_GIT.csv ]; then
+		sed -i '/Comprison(%)/d' $OUTFILE_GIT.csv
+		sed -i "/$(scaling_name)/d" $OUTFILE_GIT.csv
+	fi
+}
+
+# find string $1 in file csv and get the number of lines
+get_lines_csv_gitsource()
+{
+	if [ -f $OUTFILE_GIT.csv ]; then
+		return `grep -c "$1" $OUTFILE_GIT.csv`
+	else
+		return 0
+	fi
+}
+
+pre_clear_gitsource()
+{
+	post_clear_gitsource
+	rm -rf gitsource_*.png
+	clear_csv_gitsource
+}
+
+post_clear_gitsource()
+{
+	rm -rf results/tracer-gitsource*
+	rm -rf $OUTFILE_GIT*.log
+	rm -rf $OUTFILE_GIT*.result
+}
+
+install_gitsource()
+{
+	if [ ! -d $git_name ]; then
+		printf "Download gitsource, please wait a moment ...\n\n"
+		wget -O $git_tar $gitsource_url > /dev/null 2>&1
+
+		printf "Tar gitsource ...\n\n"
+		tar -xzf $git_tar
+	fi
+}
+
+# $1: governor, $2: loop
+run_gitsource()
+{
+	echo "Launching amd pstate tracer for $1 #$2 tracer_interval: $TRACER_INTERVAL"
+	./amd_pstate_trace.py -n tracer-gitsource-$1-$2 -i $TRACER_INTERVAL > /dev/null 2>&1 &
+
+	printf "Make and test gitsource for $1 #$2 make_cpus: $MAKE_CPUS\n"
+	cd $git_name
+	perf stat -a --per-socket -I 1000 -e power/energy-pkg/ /usr/bin/time -o ../$OUTFILE_GIT.time-gitsource-$1-$2.log make test -j$MAKE_CPUS > ../$OUTFILE_GIT-perf-$1-$2.log 2>&1
+	cd ..
+
+	for job in `jobs -p`
+	do
+		echo "Waiting for job id $job"
+		wait $job
+	done
+}
+
+# $1: governor, $2: loop
+parse_gitsource()
+{
+	awk '{print $5}' results/tracer-gitsource-$1-$2/cpu.csv | sed -e '1d' | sed s/,// > $OUTFILE_GIT-des-perf-$1-$2.log
+	avg_des_perf=$(awk 'BEGIN {i=0; sum=0};{i++; sum += $1};END {print sum/i}' $OUTFILE_GIT-des-perf-$1-$2.log)
+	printf "Gitsource-$1-#$2 avg des perf: $avg_des_perf\n" | tee -a $OUTFILE_GIT.result
+
+	awk '{print $7}' results/tracer-gitsource-$1-$2/cpu.csv | sed -e '1d' | sed s/,// > $OUTFILE_GIT-freq-$1-$2.log
+	avg_freq=$(awk 'BEGIN {i=0; sum=0};{i++; sum += $1};END {print sum/i}' $OUTFILE_GIT-freq-$1-$2.log)
+	printf "Gitsource-$1-#$2 avg freq: $avg_freq\n" | tee -a $OUTFILE_GIT.result
+
+	awk '{print $11}' results/tracer-gitsource-$1-$2/cpu.csv | sed -e '1d' | sed s/,// > $OUTFILE_GIT-load-$1-$2.log
+	avg_load=$(awk 'BEGIN {i=0; sum=0};{i++; sum += $1};END {print sum/i}' $OUTFILE_GIT-load-$1-$2.log)
+	printf "Gitsource-$1-#$2 avg load: $avg_load\n" | tee -a $OUTFILE_GIT.result
+
+	grep user $OUTFILE_GIT.time-gitsource-$1-$2.log | awk '{print $1}' | sed -e 's/user//' > $OUTFILE_GIT-time-$1-$2.log
+	time_sum=$(awk 'BEGIN {sum=0};{sum += $1};END {print sum}' $OUTFILE_GIT-time-$1-$2.log)
+	printf "Gitsource-$1-#$2 user time(s): $time_sum\n" | tee -a $OUTFILE_GIT.result
+
+	grep Joules $OUTFILE_GIT-perf-$1-$2.log | awk '{print $4}' > $OUTFILE_GIT-energy-$1-$2.log
+	en_sum=$(awk 'BEGIN {sum=0};{sum += $1};END {print sum}' $OUTFILE_GIT-energy-$1-$2.log)
+	printf "Gitsource-$1-#$2 power consumption(J): $en_sum\n" | tee -a $OUTFILE_GIT.result
+
+	# Permance is the number of run gitsource per second, denoted 1/t, where 1 is the number of run gitsource in t
+	# senconds. It is well known that P=E/t, where P is power measured in watts(W), E is energy measured in joules(J),
+	# and t is time measured in seconds(s). This means that performance per watt becomes
+	#        1/t     1/t     1
+	#       ----- = ----- = ---
+	#         P      E/t     E
+	# with unit given by 1 per joule.
+	ppw=`echo "scale=9;1/$en_sum" | bc | awk '{printf "%.9f", $0}'`
+	printf "Gitsource-$1-#$2 performance per watt(1/J): $ppw\n" | tee -a $OUTFILE_GIT.result
+	printf "\n" | tee -a $OUTFILE_GIT.result
+
+	driver_name=`echo $(scaling_name)`
+	store_csv_gitsource "$driver_name-$1" $2 $avg_des_perf $avg_freq $avg_load $time_sum $en_sum $ppw
+}
+
+# $1: governor
+loop_gitsource()
+{
+	printf "\nGitsource total test times is $LOOP_TIMES for $1\n\n"
+	for i in `seq 1 $LOOP_TIMES`
+	do
+		run_gitsource $1 $i
+		parse_gitsource $1 $i
+	done
+}
+
+# $1: governor
+gather_gitsource()
+{
+	printf "Gitsource test result for $1 (loops:$LOOP_TIMES)" | tee -a $OUTFILE_GIT.result
+	printf "\n--------------------------------------------------\n" | tee -a $OUTFILE_GIT.result
+
+	grep "Gitsource-$1-#" $OUTFILE_GIT.result | grep "avg des perf:" | awk '{print $NF}' > $OUTFILE_GIT-des-perf-$1.log
+	avg_des_perf=$(awk 'BEGIN {sum=0};{sum += $1};END {print sum/'$LOOP_TIMES'}' $OUTFILE_GIT-des-perf-$1.log)
+	printf "Gitsource-$1 avg des perf: $avg_des_perf\n" | tee -a $OUTFILE_GIT.result
+
+	grep "Gitsource-$1-#" $OUTFILE_GIT.result | grep "avg freq:" | awk '{print $NF}' > $OUTFILE_GIT-freq-$1.log
+	avg_freq=$(awk 'BEGIN {sum=0};{sum += $1};END {print sum/'$LOOP_TIMES'}' $OUTFILE_GIT-freq-$1.log)
+	printf "Gitsource-$1 avg freq: $avg_freq\n" | tee -a $OUTFILE_GIT.result
+
+	grep "Gitsource-$1-#" $OUTFILE_GIT.result | grep "avg load:" | awk '{print $NF}' > $OUTFILE_GIT-load-$1.log
+	avg_load=$(awk 'BEGIN {sum=0};{sum += $1};END {print sum/'$LOOP_TIMES'}' $OUTFILE_GIT-load-$1.log)
+	printf "Gitsource-$1 avg load: $avg_load\n" | tee -a $OUTFILE_GIT.result
+
+	grep "Gitsource-$1-#" $OUTFILE_GIT.result | grep "user time(s):" | awk '{print $NF}' > $OUTFILE_GIT-time-$1.log
+	time_sum=$(awk 'BEGIN {sum=0};{sum += $1};END {print sum}' $OUTFILE_GIT-time-$1.log)
+	printf "Gitsource-$1 total user time(s): $time_sum\n" | tee -a $OUTFILE_GIT.result
+
+	avg_time=$(awk 'BEGIN {sum=0};{sum += $1};END {print sum/'$LOOP_TIMES'}' $OUTFILE_GIT-time-$1.log)
+	printf "Gitsource-$1 avg user times(s): $avg_time\n" | tee -a $OUTFILE_GIT.result
+
+	grep "Gitsource-$1-#" $OUTFILE_GIT.result | grep "power consumption(J):" | awk '{print $NF}' > $OUTFILE_GIT-energy-$1.log
+	en_sum=$(awk 'BEGIN {sum=0};{sum += $1};END {print sum}' $OUTFILE_GIT-energy-$1.log)
+	printf "Gitsource-$1 total power consumption(J): $en_sum\n" | tee -a $OUTFILE_GIT.result
+
+	avg_en=$(awk 'BEGIN {sum=0};{sum += $1};END {print sum/'$LOOP_TIMES'}' $OUTFILE_GIT-energy-$1.log)
+	printf "Gitsource-$1 avg power consumption(J): $avg_en\n" | tee -a $OUTFILE_GIT.result
+
+	# Permance is the number of run gitsource per second, denoted 1/t, where 1 is the number of run gitsource in t
+	# senconds. It is well known that P=E/t, where P is power measured in watts(W), E is energy measured in joules(J),
+	# and t is time measured in seconds(s). This means that performance per watt becomes
+	#        1/t     1/t     1
+	#       ----- = ----- = ---
+	#         P      E/t     E
+	# with unit given by 1 per joule.
+	ppw=`echo "scale=9;1/$avg_en" | bc | awk '{printf "%.9f", $0}'`
+	printf "Gitsource-$1 performance per watt(1/J): $ppw\n" | tee -a $OUTFILE_GIT.result
+	printf "\n" | tee -a $OUTFILE_GIT.result
+
+	driver_name=`echo $(scaling_name)`
+	store_csv_gitsource "$driver_name-$1" "Average" $avg_des_perf $avg_freq $avg_load $avg_time $avg_en $ppw
+}
+
+# $1: base scaling_driver $2: base governor $3: comparison scaling_driver $4: comparison governor
+__calc_comp_gitsource()
+{
+	base=`grep "$1-$2" $OUTFILE_GIT.csv | grep "Average"`
+	comp=`grep "$3-$4" $OUTFILE_GIT.csv | grep "Average"`
+
+	if [ -n "$base" -a -n "$comp" ]; then
+		printf "\n==================================================\n" | tee -a $OUTFILE_GIT.result
+		printf "Gitsource comparison $1-$2 VS $3-$4" | tee -a $OUTFILE_GIT.result
+		printf "\n==================================================\n" | tee -a $OUTFILE_GIT.result
+
+		# get the base values
+		des_perf_base=`echo "$base" | awk '{print $3}' | sed s/,//`
+		freq_base=`echo "$base" | awk '{print $4}' | sed s/,//`
+		load_base=`echo "$base" | awk '{print $5}' | sed s/,//`
+		time_base=`echo "$base" | awk '{print $6}' | sed s/,//`
+		energy_base=`echo "$base" | awk '{print $7}' | sed s/,//`
+		ppw_base=`echo "$base" | awk '{print $8}' | sed s/,//`
+
+		# get the comparison values
+		des_perf_comp=`echo "$comp" | awk '{print $3}' | sed s/,//`
+		freq_comp=`echo "$comp" | awk '{print $4}' | sed s/,//`
+		load_comp=`echo "$comp" | awk '{print $5}' | sed s/,//`
+		time_comp=`echo "$comp" | awk '{print $6}' | sed s/,//`
+		energy_comp=`echo "$comp" | awk '{print $7}' | sed s/,//`
+		ppw_comp=`echo "$comp" | awk '{print $8}' | sed s/,//`
+
+		# compare the base and comp values
+		des_perf_drop=`echo "scale=4;($des_perf_comp-$des_perf_base)*100/$des_perf_base" | bc | awk '{printf "%.4f", $0}'`
+		printf "Gitsource-$1 des perf base: $des_perf_base comprison: $des_perf_comp percent: $des_perf_drop\n" | tee -a $OUTFILE_GIT.result
+
+		freq_drop=`echo "scale=4;($freq_comp-$freq_base)*100/$freq_base" | bc | awk '{printf "%.4f", $0}'`
+		printf "Gitsource-$1 freq base: $freq_base comprison: $freq_comp percent: $freq_drop\n" | tee -a $OUTFILE_GIT.result
+
+		load_drop=`echo "scale=4;($load_comp-$load_base)*100/$load_base" | bc | awk '{printf "%.4f", $0}'`
+		printf "Gitsource-$1 load base: $load_base comprison: $load_comp percent: $load_drop\n" | tee -a $OUTFILE_GIT.result
+
+		time_drop=`echo "scale=4;($time_comp-$time_base)*100/$time_base" | bc | awk '{printf "%.4f", $0}'`
+		printf "Gitsource-$1 perf base: $time_base comprison: $time_comp percent: $time_drop\n" | tee -a $OUTFILE_GIT.result
+
+		energy_drop=`echo "scale=4;($energy_comp-$energy_base)*100/$energy_base" | bc | awk '{printf "%.4f", $0}'`
+		printf "Gitsource-$1 energy base: $energy_base comprison: $energy_comp percent: $energy_drop\n" | tee -a $OUTFILE_GIT.result
+
+		ppw_drop=`echo "scale=4;($ppw_comp-$ppw_base)*100/$ppw_base" | bc | awk '{printf "%.4f", $0}'`
+		printf "Gitsource-$1 performance per watt base: $ppw_base comprison: $ppw_comp percent: $ppw_drop\n" | tee -a $OUTFILE_GIT.result
+		printf "\n" | tee -a $OUTFILE_GIT.result
+
+		store_csv_gitsource "$1-$2 VS $3-$4" "Comprison(%)" "$des_perf_drop" "$freq_drop" "$load_drop" "$time_drop" "$energy_drop" "$ppw_drop"
+	fi
+}
+
+# calculate the comparison(%)
+calc_comp_gitsource()
+{
+	# acpi-cpufreq-ondemand VS acpi-cpufreq-schedutil
+	__calc_comp_gitsource ${all_scaling_names[0]} ${gitsource_governors[0]} ${all_scaling_names[0]} ${gitsource_governors[1]}
+
+	# amd-pstate-ondemand VS amd-pstate-schedutil
+	__calc_comp_gitsource ${all_scaling_names[1]} ${gitsource_governors[0]} ${all_scaling_names[1]} ${gitsource_governors[1]}
+
+	# acpi-cpufreq-ondemand VS amd-pstate-ondemand
+	__calc_comp_gitsource ${all_scaling_names[0]} ${gitsource_governors[0]} ${all_scaling_names[1]} ${gitsource_governors[0]}
+
+	# acpi-cpufreq-schedutil VS amd-pstate-schedutil
+	__calc_comp_gitsource ${all_scaling_names[0]} ${gitsource_governors[1]} ${all_scaling_names[1]} ${gitsource_governors[1]}
+}
+
+# $1: file_name, $2: title, $3: ylable, $4: column
+plot_png_gitsource()
+{
+	# all_scaling_names[1] all_scaling_names[0] flag
+	#    amd-pstate           acpi-cpufreq
+	#         N                   N             0
+	#         N                   Y             1
+	#         Y                   N             2
+	#         Y                   Y             3
+	ret=`grep -c "${all_scaling_names[1]}" $OUTFILE_GIT.csv`
+	if [ $ret -eq 0 ]; then
+		ret=`grep -c "${all_scaling_names[0]}" $OUTFILE_GIT.csv`
+		if [ $ret -eq 0 ]; then
+			flag=0
+		else
+			flag=1
+		fi
+	else
+		ret=`grep -c "${all_scaling_names[0]}" $OUTFILE_GIT.csv`
+		if [ $ret -eq 0 ]; then
+			flag=2
+		else
+			flag=3
+		fi
+	fi
+
+	gnuplot << EOF
+		set term png
+		set output "$1"
+
+		set title "$2"
+		set xlabel "Test Cycles (round)"
+		set ylabel "$3"
+
+		set grid
+		set style data histogram
+		set style fill solid 0.5 border
+		set boxwidth 0.8
+
+		if ($flag == 1) {
+			plot \
+			"<(sed -n -e 's/,//g' -e '/${all_scaling_names[0]}-${gitsource_governors[0]}/p' $OUTFILE_GIT.csv)" using $4:xtic(2) title "${all_scaling_names[0]}-${gitsource_governors[0]}", \
+			"<(sed -n -e 's/,//g' -e '/${all_scaling_names[0]}-${gitsource_governors[1]}/p' $OUTFILE_GIT.csv)" using $4:xtic(2) title "${all_scaling_names[0]}-${gitsource_governors[1]}"
+		} else {
+			if ($flag == 2) {
+				plot \
+				"<(sed -n -e 's/,//g' -e '/${all_scaling_names[1]}-${gitsource_governors[0]}/p' $OUTFILE_GIT.csv)" using $4:xtic(2) title "${all_scaling_names[1]}-${gitsource_governors[0]}", \
+				"<(sed -n -e 's/,//g' -e '/${all_scaling_names[1]}-${gitsource_governors[1]}/p' $OUTFILE_GIT.csv)" using $4:xtic(2) title "${all_scaling_names[1]}-${gitsource_governors[1]}"
+			} else {
+				if ($flag == 3 ) {
+					plot \
+					"<(sed -n -e 's/,//g' -e '/${all_scaling_names[0]}-${gitsource_governors[0]}/p' $OUTFILE_GIT.csv)" using $4:xtic(2) title "${all_scaling_names[0]}-${gitsource_governors[0]}", \
+					"<(sed -n -e 's/,//g' -e '/${all_scaling_names[0]}-${gitsource_governors[1]}/p' $OUTFILE_GIT.csv)" using $4:xtic(2) title "${all_scaling_names[0]}-${gitsource_governors[1]}", \
+					"<(sed -n -e 's/,//g' -e '/${all_scaling_names[1]}-${gitsource_governors[0]}/p' $OUTFILE_GIT.csv)" using $4:xtic(2) title "${all_scaling_names[1]}-${gitsource_governors[0]}", \
+					"<(sed -n -e 's/,//g' -e '/${all_scaling_names[1]}-${gitsource_governors[1]}/p' $OUTFILE_GIT.csv)" using $4:xtic(2) title "${all_scaling_names[1]}-${gitsource_governors[1]}"
+				}
+			}
+		}
+		quit
+EOF
+}
+
+amd_pstate_gitsource()
+{
+	printf "\n---------------------------------------------\n"
+	printf "*** Running gitsource                     ***"
+	printf "\n---------------------------------------------\n"
+
+	pre_clear_gitsource
+
+	install_gitsource
+
+	get_lines_csv_gitsource "Governor"
+	if [ $? -eq 0 ]; then
+		# add titles and unit for csv file
+		store_csv_gitsource "Governor" "Round" "Des-perf" "Freq" "Load" "Time" "Energy" "Performance Per Watt"
+		store_csv_gitsource "Unit" "" "" "GHz" "" "s" "J" "1/J"
+	fi
+
+	backup_governor
+	for governor in ${gitsource_governors[*]} ; do
+		printf "\nSpecified governor is $governor\n\n"
+		switch_governor $governor
+		loop_gitsource $governor
+		gather_gitsource $governor
+	done
+	restore_governor
+
+	plot_png_gitsource "gitsouce_time.png" "Gitsource Benchmark Time" "Time (s)" 6
+	plot_png_gitsource "gitsource_energy.png" "Gitsource Benchmark Energy" "Energy (J)" 7
+	plot_png_gitsource "gitsource_ppw.png" "Gitsource Benchmark Performance Per Watt" "Performance Per Watt (1/J)" 8
+
+	calc_comp_gitsource
+
+	post_clear_gitsource
+}
diff --git a/tools/testing/selftests/amd-pstate/run.sh b/tools/testing/selftests/amd-pstate/run.sh
index dea61e4443fc..9ef6eff347d3 100755
--- a/tools/testing/selftests/amd-pstate/run.sh
+++ b/tools/testing/selftests/amd-pstate/run.sh
@@ -10,6 +10,7 @@ fi
 
 source basic.sh
 source tbench.sh
+source gitsource.sh
 
 # amd-pstate-ut only run on x86/x86_64 AMD systems.
 ARCH=$(uname -m 2>/dev/null | sed -e 's/i.86/x86/' -e 's/x86_64/x86/')
@@ -18,6 +19,7 @@ VENDOR=$(cat /proc/cpuinfo | grep -m 1 'vendor_id' | awk '{print $NF}')
 FUNC=all
 OUTFILE=selftest
 OUTFILE_TBENCH="$OUTFILE.tbench"
+OUTFILE_GIT="$OUTFILE.gitsource"
 
 SYSFS=
 CPUROOT=
@@ -130,6 +132,9 @@ amd_pstate_all()
 
 	# tbench
 	amd_pstate_tbench
+
+	# gitsource
+	amd_pstate_gitsource
 }
 
 helpme()
@@ -139,7 +144,8 @@ helpme()
 	[-o <output-file-for-dump>]
 	[-c <all: All testing,
 	     basic: Basic testing,
-	     tbench: Tbench testing.>]
+	     tbench: Tbench testing,
+	     gitsource: Gitsource testing.>]
 	[-t <tbench time limit>]
 	[-p <tbench process number>]
 	[-l <loop times for tbench>]
@@ -158,7 +164,7 @@ parse_arguments()
 				helpme
 				;;
 
-			c) # --func_type (Function to perform: basic, tbench (default: all))
+			c) # --func_type (Function to perform: basic, tbench, gitsource (default: all))
 				FUNC=$OPTARG
 				;;
 
@@ -174,7 +180,7 @@ parse_arguments()
 				PROCESS_NUM=$OPTARG
 				;;
 
-			l) # --tbench-loop-times
+			l) # --tbench/gitsource-loop-times
 				LOOP_TIMES=$OPTARG
 				;;
 
@@ -242,16 +248,16 @@ prerequisite()
 		fi
 	else
 		case "$FUNC" in
-			"tbench")
+			"tbench" | "gitsource")
 				if [ "$scaling_driver" != "$COMPARATIVE_TEST" ]; then
-					echo "$0 # Skipped: Comparison test can only run on $COMPARATIVE_TEST driver."
+					echo "$0 # Skipped: Comparison test can only run on $COMPARISON_TEST driver."
 					echo "$0 # Current cpufreq scaling drvier is $scaling_driver."
 					exit $ksft_skip
 				fi
 				;;
 
 			*)
-				echo "$0 # Skipped: Comparison test are only for tbench."
+				echo "$0 # Skipped: Comparison test are only for tbench or gitsource."
 				echo "$0 # Current comparative test is for $FUNC."
 				exit $ksft_skip
 				;;
@@ -274,6 +280,10 @@ prerequisite()
 			command_perf
 			command_tbench
 			;;
+
+		"gitsource")
+			command_perf
+			;;
 	esac
 
 	SYSFS=`mount -t sysfs | head -1 | awk '{ print $3 }'`
@@ -321,6 +331,10 @@ do_test()
 			amd_pstate_tbench
 			;;
 
+		"gitsource")
+			amd_pstate_gitsource
+			;;
+
 		*)
 			echo "Invalid [-f] function type"
 			helpme
@@ -344,6 +358,12 @@ pre_clear_dumps()
 			rm -rf tbench_*.png
 			;;
 
+		"gitsource")
+			rm -rf $OUTFILE.log
+			rm -rf $OUTFILE.backup_governor.log
+			rm -rf gitsource_*.png
+			;;
+
 		*)
 			;;
 	esac
-- 
2.34.1

[PATCH V4 4/4] Documentation: amd-pstate: Add tbench and gitsource test introduction

[Meng Li]

Introduce tbench and gitsource test cases design and implementation.
Monitor cpus changes about performance and power consumption etc.

Signed-off-by: Meng Li <li.meng@amd.com>
---
 Documentation/admin-guide/pm/amd-pstate.rst | 194 ++++++++++++++++++--
 1 file changed, 174 insertions(+), 20 deletions(-)

diff --git a/Documentation/admin-guide/pm/amd-pstate.rst b/Documentation/admin-guide/pm/amd-pstate.rst
index 8f3d30c5a0d8..4f0d5169ff86 100644
--- a/Documentation/admin-guide/pm/amd-pstate.rst
+++ b/Documentation/admin-guide/pm/amd-pstate.rst
@@ -409,37 +409,55 @@ Unit Tests for amd-pstate
 
 1. Test case decriptions
 
+    1). Basic tests
+
+        Test prerequisite and basic functions for the ``amd-pstate`` driver.
+
         +---------+--------------------------------+------------------------------------------------------------------------------------+
         | Index   | Functions                      | Description                                                                        |
         +=========+================================+====================================================================================+
-        | 0       | amd_pstate_ut_acpi_cpc_valid   || Check whether the _CPC object is present in SBIOS.                                |
+        | 1       | amd_pstate_ut_acpi_cpc_valid   || Check whether the _CPC object is present in SBIOS.                                |
         |         |                                ||                                                                                   |
         |         |                                || The detail refer to `Processor Support <processor_support_>`_.                    |
         +---------+--------------------------------+------------------------------------------------------------------------------------+
-        | 1       | amd_pstate_ut_check_enabled    || Check whether AMD P-State is enabled.                                             |
+        | 2       | amd_pstate_ut_check_enabled    || Check whether AMD P-State is enabled.                                             |
         |         |                                ||                                                                                   |
         |         |                                || AMD P-States and ACPI hardware P-States always can be supported in one processor. |
         |         |                                | But AMD P-States has the higher priority and if it is enabled with                 |
         |         |                                | :c:macro:`MSR_AMD_CPPC_ENABLE` or ``cppc_set_enable``, it will respond to the      |
         |         |                                | request from AMD P-States.                                                         |
         +---------+--------------------------------+------------------------------------------------------------------------------------+
-        | 2       | amd_pstate_ut_check_perf       || Check if the each performance values are reasonable.                              |
+        | 3       | amd_pstate_ut_check_perf       || Check if the each performance values are reasonable.                              |
         |         |                                || highest_perf >= nominal_perf > lowest_nonlinear_perf > lowest_perf > 0.           |
         +---------+--------------------------------+------------------------------------------------------------------------------------+
-        | 3       | amd_pstate_ut_check_freq       || Check if the each frequency values and max freq when set support boost mode       |
+        | 4       | amd_pstate_ut_check_freq       || Check if the each frequency values and max freq when set support boost mode       |
         |         |                                | are reasonable.                                                                    |
         |         |                                || max_freq >= nominal_freq > lowest_nonlinear_freq > min_freq > 0                   |
         |         |                                || If boost is not active but supported, this maximum frequency will be larger than  |
         |         |                                | the one in ``cpuinfo``.                                                            |
         +---------+--------------------------------+------------------------------------------------------------------------------------+
 
+    2). Tbench test
+
+        Test and monitor the cpu changes when running tbench benchmark under the specified governor.
+        These changes include desire performance, frequency, load, performance, energy etc.
+        The specified governor is ondemand or schedutil.
+        Tbench can also be tested on the ``acpi-cpufreq`` kernel driver for comparison.
+
+    3). Gitsource test
+
+        Test and monitor the cpu changes when running gitsource benchmark under the specified governor.
+        These changes include desire performance, frequency, load, time, energy etc.
+        The specified governor is ondemand or schedutil.
+        Gitsource can also be tested on the ``acpi-cpufreq`` kernel driver for comparison.
+
 #. How to execute the tests
 
    We use test module in the kselftest frameworks to implement it.
-   We create amd-pstate-ut module and tie it into kselftest.(for
+   We create ``amd-pstate-ut`` module and tie it into kselftest.(for
    details refer to Linux Kernel Selftests [4]_).
 
-    1. Build
+    1). Build
 
         + open the :c:macro:`CONFIG_X86_AMD_PSTATE` configuration option.
         + set the :c:macro:`CONFIG_X86_AMD_PSTATE_UT` configuration option to M.
@@ -449,23 +467,159 @@ Unit Tests for amd-pstate
             $ cd linux
             $ make -C tools/testing/selftests
 
-    #. Installation & Steps ::
+        + make perf ::
+
+            $ cd tools/perf/
+            $ make
+
+
+    2). Installation & Steps ::
 
         $ make -C tools/testing/selftests install INSTALL_PATH=~/kselftest
+        $ cp tools/perf/perf /user/bin/perf
         $ sudo ./kselftest/run_kselftest.sh -c amd-pstate
-        TAP version 13
-        1..1
-        # selftests: amd-pstate: amd-pstate-ut.sh
-        # amd-pstate-ut: ok
-        ok 1 selftests: amd-pstate: amd-pstate-ut.sh
-
-    #. Results ::
-
-         $ dmesg | grep "amd_pstate_ut" | tee log.txt
-         [12977.570663] amd_pstate_ut: 1    amd_pstate_ut_acpi_cpc_valid  success!
-         [12977.570673] amd_pstate_ut: 2    amd_pstate_ut_check_enabled   success!
-         [12977.571207] amd_pstate_ut: 3    amd_pstate_ut_check_perf      success!
-         [12977.571212] amd_pstate_ut: 4    amd_pstate_ut_check_freq      success!
+
+    3). Specified test case ::
+
+        $ cd ~/kselftest/amd-pstate
+        $ sudo ./run.sh -t basic
+        $ sudo ./run.sh -t tbench
+        $ sudo ./run.sh -t tbench -m acpi-cpufreq
+        $ sudo ./run.sh -t gitsource
+        $ sudo ./run.sh -t gitsource -m acpi-cpufreq
+        $ ./run.sh --help
+        ./run.sh: illegal option -- -
+        Usage: ./run.sh [OPTION...]
+                [-h <help>]
+                [-o <output-file-for-dump>]
+                [-c <all: All testing,
+                     basic: Basic testing,
+                     tbench: Tbench testing,
+                     gitsource: Gitsource testing.>]
+                [-t <tbench time limit>]
+                [-p <tbench process number>]
+                [-l <loop times for tbench>]
+                [-i <amd tracer interval>]
+                [-m <comparative test: acpi-cpufreq>]
+
+
+    4). Results
+
+        + basic
+
+         When you finish test, you will get the following log info ::
+
+          $ dmesg | grep "amd_pstate_ut" | tee log.txt
+          [12977.570663] amd_pstate_ut: 1    amd_pstate_ut_acpi_cpc_valid  success!
+          [12977.570673] amd_pstate_ut: 2    amd_pstate_ut_check_enabled   success!
+          [12977.571207] amd_pstate_ut: 3    amd_pstate_ut_check_perf      success!
+          [12977.571212] amd_pstate_ut: 4    amd_pstate_ut_check_freq      success!
+
+        + tbench
+
+         When you finish test, you will get selftest.tbench.csv and png images.
+         The selftest.tbench.csv file contains the raw data and the drop of the comparative test.
+         The png images shows the performance, energy and performan per watt of each test.
+         Open selftest.tbench.csv :
+
+         +-------------------------------------------------+--------------+----------+---------+----------+-------------+---------+----------------------+
+         + Governor                                        | Round        | Des-perf | Freq    | Load     | Performance | Energy  | Performance Per Watt |
+         +-------------------------------------------------+--------------+----------+---------+----------+-------------+---------+----------------------+
+         + Unit                                            |              |          | GHz     |          | MB/s        | J       | MB/J                 |
+         +=================================================+==============+==========+=========+==========+=============+=========+======================+
+         + amd-pstate-ondemand                             | 1            |          |         |          | 2504.05     | 1563.67 | 158.5378             |
+         +-------------------------------------------------+--------------+----------+---------+----------+-------------+---------+----------------------+
+         + amd-pstate-ondemand                             | 2            |          |         |          | 2243.64     | 1430.32 | 155.2941             |
+         +-------------------------------------------------+--------------+----------+---------+----------+-------------+---------+----------------------+
+         + amd-pstate-ondemand                             | 3            |          |         |          | 2183.88     | 1401.32 | 154.2860             |
+         +-------------------------------------------------+--------------+----------+---------+----------+-------------+---------+----------------------+
+         + amd-pstate-ondemand                             | Average      |          |         |          | 2310.52     | 1465.1  | 156.1268             |
+         +-------------------------------------------------+--------------+----------+---------+----------+-------------+---------+----------------------+
+         + amd-pstate-schedutil                            | 1            | 165.329  | 1.62257 | 99.798   | 2136.54     | 1395.26 | 151.5971             |
+         +-------------------------------------------------+--------------+----------+---------+----------+-------------+---------+----------------------+
+         + amd-pstate-schedutil                            | 2            | 166      | 1.49761 | 99.9993  | 2100.56     | 1380.5  | 150.6377             |
+         +-------------------------------------------------+--------------+----------+---------+----------+-------------+---------+----------------------+
+         + amd-pstate-schedutil                            | 3            | 166      | 1.47806 | 99.9993  | 2084.12     | 1375.76 | 149.9737             |
+         +-------------------------------------------------+--------------+----------+---------+----------+-------------+---------+----------------------+
+         + amd-pstate-schedutil                            | Average      | 165.776  | 1.53275 | 99.9322  | 2107.07     | 1383.84 | 150.7399             |
+         +-------------------------------------------------+--------------+----------+---------+----------+-------------+---------+----------------------+
+         + acpi-cpufreq-ondemand                           | 1            |          |         |          | 2529.9      | 1564.4  | 160.0997             |
+         +-------------------------------------------------+--------------+----------+---------+----------+-------------+---------+----------------------+
+         + acpi-cpufreq-ondemand                           | 2            |          |         |          | 2249.76     | 1432.97 | 155.4297             |
+         +-------------------------------------------------+--------------+----------+---------+----------+-------------+---------+----------------------+
+         + acpi-cpufreq-ondemand                           | 3            |          |         |          | 2181.46     | 1406.88 | 153.5060             |
+         +-------------------------------------------------+--------------+----------+---------+----------+-------------+---------+----------------------+
+         + acpi-cpufreq-ondemand                           | Average      |          |         |          | 2320.37     | 1468.08 | 156.4741             |
+         +-------------------------------------------------+--------------+----------+---------+----------+-------------+---------+----------------------+
+         + acpi-cpufreq-schedutil                          | 1            |          |         |          | 2137.64     | 1385.24 | 152.7723             |
+         +-------------------------------------------------+--------------+----------+---------+----------+-------------+---------+----------------------+
+         + acpi-cpufreq-schedutil                          | 2            |          |         |          | 2107.05     | 1372.23 | 152.0138             |
+         +-------------------------------------------------+--------------+----------+---------+----------+-------------+---------+----------------------+
+         + acpi-cpufreq-schedutil                          | 3            |          |         |          | 2085.86     | 1365.35 | 151.2433             |
+         +-------------------------------------------------+--------------+----------+---------+----------+-------------+---------+----------------------+
+         + acpi-cpufreq-schedutil                          | Average      |          |         |          | 2110.18     | 1374.27 | 152.0136             |
+         +-------------------------------------------------+--------------+----------+---------+----------+-------------+---------+----------------------+
+         + acpi-cpufreq-ondemand VS acpi-cpufreq-schedutil | Comprison(%) |          |         |          | -9.0584     | -6.3899 | -2.8506              |
+         +-------------------------------------------------+--------------+----------+---------+----------+-------------+---------+----------------------+
+         + amd-pstate-ondemand VS amd-pstate-schedutil     | Comprison(%) |          |         |          | 8.8053      | -5.5463 | -3.4503              |
+         +-------------------------------------------------+--------------+----------+---------+----------+-------------+---------+----------------------+
+         + acpi-cpufreq-ondemand VS amd-pstate-ondemand    | Comprison(%) |          |         |          | -0.4245     | -0.2029 | -0.2219              |
+         +-------------------------------------------------+--------------+----------+---------+----------+-------------+---------+----------------------+
+         + acpi-cpufreq-schedutil VS amd-pstate-schedutil  | Comprison(%) |          |         |          | -0.1473     | 0.6963  | -0.8378              |
+         +-------------------------------------------------+--------------+----------+---------+----------+-------------+---------+----------------------+
+
+        + gitsource
+
+         When you finish test, you will get selftest.gitsource.csv and png images.
+         The selftest.gitsource.csv file contains the raw data and the drop of the comparative test.
+         The png images shows the performance, energy and performan per watt of each test.
+         Open selftest.gitsource.csv :
+
+         +-------------------------------------------------+--------------+----------+----------+----------+-------------+---------+----------------------+
+         + Governor                                        | Round        | Des-perf | Freq     | Load     | Time        | Energy  | Performance Per Watt |
+         +-------------------------------------------------+--------------+----------+----------+----------+-------------+---------+----------------------+
+         + Unit                                            |              |          | GHz      |          | s           | J       | 1/J                  |
+         +=================================================+==============+==========+==========+==========+=============+=========+======================+
+         + amd-pstate-ondemand                             | 1            | 50.119   | 2.10509  | 23.3076  | 475.69      | 865.78  | 0.001155027          |
+         +-------------------------------------------------+--------------+----------+----------+----------+-------------+---------+----------------------+
+         + amd-pstate-ondemand                             | 2            | 94.8006  | 1.98771  | 56.6533  | 467.1       | 839.67  | 0.001190944          |
+         +-------------------------------------------------+--------------+----------+----------+----------+-------------+---------+----------------------+
+         + amd-pstate-ondemand                             | 3            | 76.6091  | 2.53251  | 43.7791  | 467.69      | 855.85  | 0.001168429          |
+         +-------------------------------------------------+--------------+----------+----------+----------+-------------+---------+----------------------+
+         + amd-pstate-ondemand                             | Average      | 73.8429  | 2.20844  | 41.2467  | 470.16      | 853.767 | 0.001171279          |
+         +-------------------------------------------------+--------------+----------+----------+----------+-------------+---------+----------------------+
+         + amd-pstate-schedutil                            | 1            | 165.919  | 1.62319  | 98.3868  | 464.17      | 866.8   | 0.001153668          |
+         +-------------------------------------------------+--------------+----------+----------+----------+-------------+---------+----------------------+
+         + amd-pstate-schedutil                            | 2            | 165.97   | 1.31309  | 99.5712  | 480.15      | 880.4   | 0.001135847          |
+         +-------------------------------------------------+--------------+----------+----------+----------+-------------+---------+----------------------+
+         + amd-pstate-schedutil                            | 3            | 165.973  | 1.28448  | 99.9252  | 481.79      | 867.02  | 0.001153375          |
+         +-------------------------------------------------+--------------+----------+----------+----------+-------------+---------+----------------------+
+         + amd-pstate-schedutil                            | Average      | 165.954  | 1.40692  | 99.2944  | 475.37      | 871.407 | 0.001147569          |
+         +-------------------------------------------------+--------------+----------+----------+----------+-------------+---------+----------------------+
+         + acpi-cpufreq-ondemand                           | 1            |          |          |          | 2379.62     | 742.96  | 0.001345967          |
+         +-------------------------------------------------+--------------+----------+----------+----------+-------------+---------+----------------------+
+         + acpi-cpufreq-ondemand                           | 2            |          |          |          | 441.74      | 817.49  | 0.001223256          |
+         +-------------------------------------------------+--------------+----------+----------+----------+-------------+---------+----------------------+
+         + acpi-cpufreq-ondemand                           | 3            |          |          |          | 455.48      | 820.01  | 0.001219497          |
+         +-------------------------------------------------+--------------+----------+----------+----------+-------------+---------+----------------------+
+         + acpi-cpufreq-ondemand                           | Average      |          |          |          | 425.613     | 793.487 | 0.001260260          |
+         +-------------------------------------------------+--------------+----------+----------+----------+-------------+---------+----------------------+
+         + acpi-cpufreq-schedutil                          | 1            |          |          |          | 459.69      | 838.54  | 0.001192548          |
+         +-------------------------------------------------+--------------+----------+----------+----------+-------------+---------+----------------------+
+         + acpi-cpufreq-schedutil                          | 2            |          |          |          | 466.55      | 830.89  | 0.001203528          |
+         +-------------------------------------------------+--------------+----------+----------+----------+-------------+---------+----------------------+
+         + acpi-cpufreq-schedutil                          | 3            |          |          |          | 470.38      | 837.32  | 0.001194286          |
+         +-------------------------------------------------+--------------+----------+----------+----------+-------------+---------+----------------------+
+         + acpi-cpufreq-schedutil                          | Average      |          |          |          | 465.54      | 835.583 | 0.001196769          |
+         +-------------------------------------------------+--------------+----------+----------+----------+-------------+---------+----------------------+
+         + acpi-cpufreq-ondemand VS acpi-cpufreq-schedutil | Comprison(%) |          |          |          | 9.3810      | 5.3051  | -5.0379              |
+         +-------------------------------------------------+--------------+----------+----------+----------+-------------+---------+----------------------+
+         + amd-pstate-ondemand VS amd-pstate-schedutil     | Comprison(%) | 124.7392 | -36.2934 | 140.7329 | 1.1081      | 2.0661  | -2.0242              |
+         +-------------------------------------------------+--------------+----------+----------+----------+-------------+---------+----------------------+
+         + acpi-cpufreq-ondemand VS amd-pstate-ondemand    | Comprison(%) |          |          |          | 10.4665     | 7.5968  | -7.0605              |
+         +-------------------------------------------------+--------------+----------+----------+----------+-------------+---------+----------------------+
+         + acpi-cpufreq-schedutil VS amd-pstate-schedutil  | Comprison(%) |          |          |          | 2.1115      | 4.2873  | -4.1110              |
+         +-------------------------------------------------+--------------+----------+----------+----------+-------------+---------+----------------------+
 
 Reference
 ===========
-- 
2.34.1

Re: [PATCH V4 0/4] Add tbench/gitsource new test cases for amd-pstate-ut

[Huang Rui]

On Mon, Oct 24, 2022 at 09:33:52AM +0800, Meng, Li (Jassmine) wrote:
> Hi all:
> 
> First, we modify amd-pstate-ut.sh to basic.sh as a basic test, mainly for
> AMD P-State kernel drivers. The purpose of this modification is to
> facilitate the subsequent addition of gitsource, tbench and other tests.
> You can test specific functions by specifying test cases.
> Default test all cases, include basic, tbench and gitsource etc.
> 
> Secondly, add tbench.sh trigger the tbench testing and monitor the cpu
> 
> Third, add gitsource.sh trigger the gitsource testing and monitor the cpu
> information.
> 
> Finally, modify rst document to introduce test steps and results etc.
> 

Series look good for me right now, thanks!
Next time, please send them to linux-kselftest@vger.kernel.org as well.

Acked-by: Huang Rui <ray.huang@amd.com>

Shuah, could you please take a look at these series?

Thanks,
Ray

> See patch series in below git repo:
> V1:https://lore.kernel.org/lkml/20220706073622.672135-1-li.meng@amd.com/
> V2:https://lore.kernel.org/lkml/20220804054414.1510764-1-li.meng@amd.com/
> V3:https://lore.kernel.org/lkml/20220914061105.1982477-1-li.meng@amd.com/
> 
> Changes from V1->V2:
> - selftests: amd-pstate: basic
> - - delete main.sh and merge funtions into run.sh
> - selftests: amd-pstate: tbench
> - - modify ppw to performance per watt for tbench.
> - - add comments for performance per watt for tbench.
> - - add comparative test on acpi-cpufreq for tbench.
> - - calculate drop between amd-pstate and acpi-cpufreq etc.
> - - plot images about perfrmance,energy and ppw for tbench.
> - selftests: amd-pstate: gitsource
> - - modify ppw to performance per watt for gitsource.
> - - add comments for performance per watt for gitsource.
> - - add comparative test on acpi-cpufreq for gitsource.
> - - calculate drop between amd-pstate and acpi-cpufreq etc.
> - - plot images about perfrmance,energy and ppw for gitsource.
> - Documentation: amd-pstate:
> - - modify rst doc, introduce comparative test etc.
> 
> Changes from V2->V3:
> - selftests: amd-pstate:
> - - reduce print logs for governor.
> - - add a check to see if tbench and the perf tools are already installed.
> - - install tbench package from apt or yum.
> - - correct spelling errors from comprison to comparison.
> 
> Changes from V2->V3:
> - selftests: amd-pstate:
> - - modify cover letter and commit logs.
> - Documentation: amd-pstate:
> - - modify some format questions.
> 
> Thanks, 
> Jasmine 
> 
> Meng Li (4):
>   selftests: amd-pstate: Modify amd-pstate-ut.sh to basic.sh.
>   selftests: amd-pstate: Trigger tbench benchmark and test cpus
>   selftests: amd-pstate: Trigger gitsource benchmark and test cpus
>   Documentation: amd-pstate: Add tbench and gitsource test introduction
> 
>  Documentation/admin-guide/pm/amd-pstate.rst   | 194 ++++++++-
>  tools/testing/selftests/amd-pstate/Makefile   |  11 +-
>  .../selftests/amd-pstate/amd-pstate-ut.sh     |  56 ---
>  tools/testing/selftests/amd-pstate/basic.sh   |  38 ++
>  .../testing/selftests/amd-pstate/gitsource.sh | 345 ++++++++++++++++
>  tools/testing/selftests/amd-pstate/run.sh     | 387 ++++++++++++++++++
>  tools/testing/selftests/amd-pstate/tbench.sh  | 334 +++++++++++++++
>  7 files changed, 1288 insertions(+), 77 deletions(-)
>  delete mode 100755 tools/testing/selftests/amd-pstate/amd-pstate-ut.sh
>  create mode 100755 tools/testing/selftests/amd-pstate/basic.sh
>  create mode 100755 tools/testing/selftests/amd-pstate/gitsource.sh
>  create mode 100755 tools/testing/selftests/amd-pstate/run.sh
>  create mode 100755 tools/testing/selftests/amd-pstate/tbench.sh
> 
> -- 
> 2.34.1
>