From: Zhang Rui <rui.zhang@intel.com>
To: rjw@rjwysocki.net, daniel.lezcano@linaro.org
Cc: linux-pm@vger.kernel.org, srinivas.pandruvada@linux.intel.com
Subject: [PATCH 2/6] thermal/int340x/processor_thermal: Use Intel TCC library
Date: Tue, 8 Nov 2022 11:33:28 +0800 [thread overview]
Message-ID: <20221108033332.27760-3-rui.zhang@intel.com> (raw)
In-Reply-To: <20221108033332.27760-1-rui.zhang@intel.com>
Cleanup the code by using Intel TCC library for TCC (Thermal Control
Circuitry) MSR access.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
---
drivers/thermal/intel/int340x_thermal/Kconfig | 1 +
.../processor_thermal_device.c | 123 ++++--------------
2 files changed, 25 insertions(+), 99 deletions(-)
diff --git a/drivers/thermal/intel/int340x_thermal/Kconfig b/drivers/thermal/intel/int340x_thermal/Kconfig
index 5d046de96a5d..0f511917e0e1 100644
--- a/drivers/thermal/intel/int340x_thermal/Kconfig
+++ b/drivers/thermal/intel/int340x_thermal/Kconfig
@@ -10,6 +10,7 @@ config INT340X_THERMAL
select ACPI_THERMAL_REL
select ACPI_FAN
select INTEL_SOC_DTS_IOSF_CORE
+ select INTEL_TCC
select PROC_THERMAL_MMIO_RAPL if POWERCAP
help
Newer laptops and tablets that use ACPI may have thermal sensors and
diff --git a/drivers/thermal/intel/int340x_thermal/processor_thermal_device.c b/drivers/thermal/intel/int340x_thermal/processor_thermal_device.c
index a8d98f1bd6c6..a9e08dddb773 100644
--- a/drivers/thermal/intel/int340x_thermal/processor_thermal_device.c
+++ b/drivers/thermal/intel/int340x_thermal/processor_thermal_device.c
@@ -4,6 +4,7 @@
* Copyright (c) 2014, Intel Corporation.
*/
#include <linux/acpi.h>
+#include <linux/intel_tcc.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/pci.h>
@@ -68,54 +69,17 @@ static const struct attribute_group power_limit_attribute_group = {
.name = "power_limits"
};
-static int tcc_get_offset(void)
-{
- u64 val;
- int err;
-
- err = rdmsrl_safe(MSR_IA32_TEMPERATURE_TARGET, &val);
- if (err)
- return err;
-
- return (val >> 24) & 0x3f;
-}
-
static ssize_t tcc_offset_degree_celsius_show(struct device *dev,
struct device_attribute *attr,
char *buf)
{
- int tcc;
-
- tcc = tcc_get_offset();
- if (tcc < 0)
- return tcc;
-
- return sprintf(buf, "%d\n", tcc);
-}
-
-static int tcc_offset_update(unsigned int tcc)
-{
- u64 val;
- int err;
+ int offset, ret;
- if (tcc > 63)
- return -EINVAL;
-
- err = rdmsrl_safe(MSR_IA32_TEMPERATURE_TARGET, &val);
- if (err)
- return err;
-
- if (val & BIT(31))
- return -EPERM;
-
- val &= ~GENMASK_ULL(29, 24);
- val |= (tcc & 0x3f) << 24;
-
- err = wrmsrl_safe(MSR_IA32_TEMPERATURE_TARGET, val);
- if (err)
- return err;
+ ret = intel_tcc_get_offset(cpumask_any(cpu_online_mask), &offset);
+ if (ret < 0)
+ return ret;
- return 0;
+ return sprintf(buf, "%d\n", offset);
}
static ssize_t tcc_offset_degree_celsius_store(struct device *dev,
@@ -136,7 +100,7 @@ static ssize_t tcc_offset_degree_celsius_store(struct device *dev,
if (kstrtouint(buf, 0, &tcc))
return -EINVAL;
- err = tcc_offset_update(tcc);
+ err = intel_tcc_set_offset(cpumask_any(cpu_online_mask), tcc);
if (err)
return err;
@@ -145,66 +109,26 @@ static ssize_t tcc_offset_degree_celsius_store(struct device *dev,
static DEVICE_ATTR_RW(tcc_offset_degree_celsius);
-static int stored_tjmax; /* since it is fixed, we can have local storage */
-
-static int get_tjmax(void)
-{
- u32 eax, edx;
- u32 val;
- int err;
-
- err = rdmsr_safe(MSR_IA32_TEMPERATURE_TARGET, &eax, &edx);
- if (err)
- return err;
-
- val = (eax >> 16) & 0xff;
- if (val)
- return val;
-
- return -EINVAL;
-}
-
-static int read_temp_msr(int *temp)
+static int proc_thermal_get_zone_temp(struct thermal_zone_device *zone,
+ int *temp)
{
int cpu;
- u32 eax, edx;
int err;
- unsigned long curr_temp_off = 0;
+ int curr_temp_off;
*temp = 0;
for_each_online_cpu(cpu) {
- err = rdmsr_safe_on_cpu(cpu, MSR_IA32_THERM_STATUS, &eax,
- &edx);
+ err = intel_tcc_get_temp(cpu, false, &curr_temp_off);
if (err)
- goto err_ret;
- else {
- if (eax & 0x80000000) {
- curr_temp_off = (eax >> 16) & 0x7f;
- if (!*temp || curr_temp_off < *temp)
- *temp = curr_temp_off;
- } else {
- err = -EINVAL;
- goto err_ret;
- }
- }
+ return err;
+ if (!*temp || curr_temp_off > *temp)
+ *temp = curr_temp_off;
}
- return 0;
-err_ret:
- return err;
-}
+ *temp *= 1000;
-static int proc_thermal_get_zone_temp(struct thermal_zone_device *zone,
- int *temp)
-{
- int ret;
-
- ret = read_temp_msr(temp);
- if (!ret)
- *temp = (stored_tjmax - *temp) * 1000;
-
- return ret;
+ return 0;
}
static struct thermal_zone_device_ops proc_thermal_local_ops = {
@@ -286,7 +210,7 @@ int proc_thermal_add(struct device *dev, struct proc_thermal_device *proc_priv)
acpi_status status;
unsigned long long tmp;
struct thermal_zone_device_ops *ops = NULL;
- int ret;
+ int tjmax, ret;
adev = ACPI_COMPANION(dev);
if (!adev)
@@ -302,8 +226,7 @@ int proc_thermal_add(struct device *dev, struct proc_thermal_device *proc_priv)
status = acpi_evaluate_integer(adev->handle, "_TMP", NULL, &tmp);
if (ACPI_FAILURE(status)) {
/* there is no _TMP method, add local method */
- stored_tjmax = get_tjmax();
- if (stored_tjmax > 0)
+ if (!intel_tcc_get_tjmax(cpumask_any(cpu_online_mask), &tjmax))
ops = &proc_thermal_local_ops;
}
@@ -356,9 +279,10 @@ static int tcc_offset_save = -1;
int proc_thermal_suspend(struct device *dev)
{
- tcc_offset_save = tcc_get_offset();
- if (tcc_offset_save < 0)
- dev_warn(dev, "failed to save offset (%d)\n", tcc_offset_save);
+ if (intel_tcc_get_offset(cpumask_any(cpu_online_mask), &tcc_offset_save)) {
+ dev_warn(dev, "failed to save offset\n");
+ tcc_offset_save = -1;
+ }
return 0;
}
@@ -373,7 +297,7 @@ int proc_thermal_resume(struct device *dev)
/* Do not update if saving failed */
if (tcc_offset_save >= 0)
- tcc_offset_update(tcc_offset_save);
+ intel_tcc_set_offset(cpumask_any(cpu_online_mask), tcc_offset_save);
return 0;
}
@@ -460,6 +384,7 @@ void proc_thermal_mmio_remove(struct pci_dev *pdev, struct proc_thermal_device *
}
EXPORT_SYMBOL_GPL(proc_thermal_mmio_remove);
+MODULE_IMPORT_NS(INTEL_TCC);
MODULE_AUTHOR("Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>");
MODULE_DESCRIPTION("Processor Thermal Reporting Device Driver");
MODULE_LICENSE("GPL v2");
--
2.25.1
next prev parent reply other threads:[~2022-11-08 3:31 UTC|newest]
Thread overview: 23+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-11-08 3:33 [PATCH 0/6] thermal/intel: Introduce intel-tcc lib and enhance tjmax handling Zhang Rui
2022-11-08 3:33 ` [PATCH 1/6] thermal/intel: Introduce Intel TCC library Zhang Rui
2022-12-08 13:49 ` Rafael J. Wysocki
2022-12-08 14:07 ` Rafael J. Wysocki
2022-12-09 13:57 ` Zhang Rui
2022-12-08 16:49 ` Zhang Rui
2022-12-08 17:00 ` Rafael J. Wysocki
2022-12-09 13:32 ` Zhang Rui
2022-12-09 16:28 ` srinivas pandruvada
2022-12-11 7:50 ` Zhang Rui
2022-12-12 12:15 ` Rafael J. Wysocki
2022-12-11 7:23 ` Zhang Rui
2022-12-12 12:11 ` Rafael J. Wysocki
2022-12-13 1:38 ` Zhang Rui
2022-12-13 15:34 ` Rafael J. Wysocki
2022-12-14 16:15 ` Zhang Rui
2022-12-14 16:17 ` Rafael J. Wysocki
2022-12-14 16:19 ` Rafael J. Wysocki
2022-11-08 3:33 ` Zhang Rui [this message]
2022-11-08 3:33 ` [PATCH 3/6] thermal/intel/intel_soc_dts_iosf: Use " Zhang Rui
2022-11-08 3:33 ` [PATCH 4/6] thermal/intel/intel_tcc_cooling: " Zhang Rui
2022-11-08 3:33 ` [PATCH 5/6] thermal/x86_pkg_temp_thermal: " Zhang Rui
2022-11-08 3:33 ` [PATCH 6/6] thermal/x86_pkg_temp_thermal: Add support for handling dynamic tjmax Zhang Rui
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20221108033332.27760-3-rui.zhang@intel.com \
--to=rui.zhang@intel.com \
--cc=daniel.lezcano@linaro.org \
--cc=linux-pm@vger.kernel.org \
--cc=rjw@rjwysocki.net \
--cc=srinivas.pandruvada@linux.intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox