From: Daniel Lezcano <daniel.lezcano@linaro.org>
To: rafael@kernel.org, srinivas.pandruvada@linux.intel.com
Cc: linux-pm@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: [PATCH 4/5] thermal/drivers/intel: Use generic trip points for quark_dts
Date: Mon, 12 Dec 2022 21:58:42 +0100 [thread overview]
Message-ID: <20221212205843.3119407-5-daniel.lezcano@kernel.org> (raw)
In-Reply-To: <20221212205843.3119407-1-daniel.lezcano@kernel.org>
From: Daniel Lezcano <daniel.lezcano@linaro.org>
The thermal framework gives the possibility to register the trip
points with the thermal zone. When that is done, no get_trip_* ops are
needed and they can be removed.
Convert ops content logic into generic trip points and register them with the
thermal zone.
Signed-off-by: Daniel Lezcano <daniel.lezcano@kernel.org>
---
.../thermal/intel/intel_quark_dts_thermal.c | 45 ++++++++-----------
1 file changed, 18 insertions(+), 27 deletions(-)
diff --git a/drivers/thermal/intel/intel_quark_dts_thermal.c b/drivers/thermal/intel/intel_quark_dts_thermal.c
index 3eafc6b0e6c3..e1b84ba59a20 100644
--- a/drivers/thermal/intel/intel_quark_dts_thermal.c
+++ b/drivers/thermal/intel/intel_quark_dts_thermal.c
@@ -84,6 +84,7 @@
#define QRK_DTS_MASK_TP_THRES 0xFF
#define QRK_DTS_SHIFT_TP 8
#define QRK_DTS_ID_TP_CRITICAL 0
+#define QRK_DTS_ID_TP_HOT 1
#define QRK_DTS_SAFE_TP_THRES 105
/* Thermal Sensor Register Lock */
@@ -104,6 +105,7 @@ struct soc_sensor_entry {
u32 store_ptps;
u32 store_dts_enable;
struct thermal_zone_device *tzone;
+ struct thermal_trip trips[QRK_MAX_DTS_TRIPS];
};
static struct soc_sensor_entry *soc_dts;
@@ -172,7 +174,7 @@ static int soc_dts_disable(struct thermal_zone_device *tzd)
return ret;
}
-static int _get_trip_temp(int trip, int *temp)
+static int get_trip_temp(int trip, int *temp)
{
int status;
u32 out;
@@ -197,17 +199,6 @@ static int _get_trip_temp(int trip, int *temp)
return 0;
}
-static inline int sys_get_trip_temp(struct thermal_zone_device *tzd,
- int trip, int *temp)
-{
- return _get_trip_temp(trip, temp);
-}
-
-static inline int sys_get_crit_temp(struct thermal_zone_device *tzd, int *temp)
-{
- return _get_trip_temp(QRK_DTS_ID_TP_CRITICAL, temp);
-}
-
static int update_trip_temp(struct soc_sensor_entry *aux_entry,
int trip, int temp)
{
@@ -262,17 +253,6 @@ static inline int sys_set_trip_temp(struct thermal_zone_device *tzd, int trip,
return update_trip_temp(tzd->devdata, trip, temp);
}
-static int sys_get_trip_type(struct thermal_zone_device *thermal,
- int trip, enum thermal_trip_type *type)
-{
- if (trip)
- *type = THERMAL_TRIP_HOT;
- else
- *type = THERMAL_TRIP_CRITICAL;
-
- return 0;
-}
-
static int sys_get_curr_temp(struct thermal_zone_device *tzd,
int *temp)
{
@@ -315,10 +295,7 @@ static int sys_change_mode(struct thermal_zone_device *tzd,
static struct thermal_zone_device_ops tzone_ops = {
.get_temp = sys_get_curr_temp,
- .get_trip_temp = sys_get_trip_temp,
- .get_trip_type = sys_get_trip_type,
.set_trip_temp = sys_set_trip_temp,
- .get_crit_temp = sys_get_crit_temp,
.change_mode = sys_change_mode,
};
@@ -344,7 +321,7 @@ static void free_soc_dts(struct soc_sensor_entry *aux_entry)
static struct soc_sensor_entry *alloc_soc_dts(void)
{
struct soc_sensor_entry *aux_entry;
- int err;
+ int err, temperature;
u32 out;
int wr_mask;
@@ -385,6 +362,20 @@ static struct soc_sensor_entry *alloc_soc_dts(void)
goto err_ret;
}
+ err = get_trip_temp(QRK_DTS_ID_TP_CRITICAL, &temperature);
+ if (err)
+ goto err_ret;
+
+ aux_entry->trips[QRK_DTS_ID_TP_CRITICAL].temperature = temperature;
+ aux_entry->trips[QRK_DTS_ID_TP_CRITICAL].type = THERMAL_TRIP_CRITICAL;
+
+ err = get_trip_temp(QRK_DTS_ID_TP_HOT, &temperature);
+ if (err)
+ goto err_ret;
+
+ aux_entry->trips[QRK_DTS_ID_TP_HOT].temperature = temperature;
+ aux_entry->trips[QRK_DTS_ID_TP_HOT].type = THERMAL_TRIP_HOT;
+
aux_entry->tzone = thermal_zone_device_register("quark_dts",
QRK_MAX_DTS_TRIPS,
wr_mask,
--
2.34.1
next prev parent reply other threads:[~2022-12-12 20:59 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-12-12 20:58 [PATCH 0/5] Add ACPI trip points parser helpers Daniel Lezcano
2022-12-12 20:58 ` [PATCH 1/5] thermal/acpi: Add ACPI trip point routines Daniel Lezcano
2022-12-12 20:58 ` [PATCH 2/5] thermal/drivers/intel: Use generic trip points for intel_pch Daniel Lezcano
2022-12-12 20:58 ` [PATCH 3/5] thermal/drivers/intel: Use generic trip points int340x Daniel Lezcano
2022-12-12 20:58 ` Daniel Lezcano [this message]
2022-12-12 20:58 ` [PATCH 5/5] thermal/drivers/intel: Use generic trip points for processor_thermal_device_pci Daniel Lezcano
2022-12-14 14:10 ` [PATCH 0/5] Add ACPI trip points parser helpers Rafael J. Wysocki
2022-12-14 14:42 ` Daniel Lezcano
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20221212205843.3119407-5-daniel.lezcano@kernel.org \
--to=daniel.lezcano@linaro.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pm@vger.kernel.org \
--cc=rafael@kernel.org \
--cc=srinivas.pandruvada@linux.intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).