From: Roger Lu <roger.lu@mediatek.com>
To: Matthias Brugger <matthias.bgg@gmail.com>,
Enric Balletbo Serra <eballetbo@gmail.com>,
Kevin Hilman <khilman@kernel.org>,
Nicolas Boichat <drinkcat@google.com>
Cc: Fan Chen <fan.chen@mediatek.com>,
Roger Lu <roger.lu@mediatek.com>,
Jia-wei Chang <jia-wei.chang@mediatek.com>,
<devicetree@vger.kernel.org>,
<linux-arm-kernel@lists.infradead.org>,
<linux-mediatek@lists.infradead.org>,
<linux-kernel@vger.kernel.org>, <linux-pm@vger.kernel.org>,
<Project_Global_Chrome_Upstream_Group@mediatek.com>
Subject: [PATCH v1 09/13] soc: mediatek: mtk-svs: use common function to disable restore voltages
Date: Mon, 26 Dec 2022 17:42:44 +0800 [thread overview]
Message-ID: <20221226094248.4506-10-roger.lu@mediatek.com> (raw)
In-Reply-To: <20221226094248.4506-1-roger.lu@mediatek.com>
The timing of disabling/restoring SVS bank is more than one place.
Therefore, add a common function to use for removing the superfluous codes.
Signed-off-by: Roger Lu <roger.lu@mediatek.com>
---
drivers/soc/mediatek/mtk-svs.c | 44 +++++++++++++++++-----------------
1 file changed, 22 insertions(+), 22 deletions(-)
diff --git a/drivers/soc/mediatek/mtk-svs.c b/drivers/soc/mediatek/mtk-svs.c
index 934e7ea976b0..c4b36c908eda 100644
--- a/drivers/soc/mediatek/mtk-svs.c
+++ b/drivers/soc/mediatek/mtk-svs.c
@@ -623,6 +623,26 @@ static int svs_adjust_pm_opp_volts(struct svs_bank *svsb)
return ret;
}
+static void svs_bank_disable_and_restore_default_volts(struct svs_platform *svsp,
+ struct svs_bank *svsb)
+{
+ unsigned long flags;
+
+ if (svsb->mode_support == SVSB_MODE_ALL_DISABLE)
+ return;
+
+ /* This spinlock might wait for svs_isr() process */
+ spin_lock_irqsave(&svs_lock, flags);
+ svsp->pbank = svsb;
+ svs_switch_bank(svsp);
+ svs_writel_relaxed(svsp, SVSB_PTPEN_OFF, SVSEN);
+ svs_writel_relaxed(svsp, SVSB_INTSTS_VAL_CLEAN, INTSTS);
+ spin_unlock_irqrestore(&svs_lock, flags);
+
+ svsb->phase = SVSB_PHASE_ERROR;
+ svs_adjust_pm_opp_volts(svsb);
+}
+
static int svs_dump_debug_show(struct seq_file *m, void *p)
{
struct svs_platform *svsp = (struct svs_platform *)m->private;
@@ -698,7 +718,6 @@ static ssize_t svs_enable_debug_write(struct file *filp,
{
struct svs_bank *svsb = file_inode(filp)->i_private;
struct svs_platform *svsp = dev_get_drvdata(svsb->dev);
- unsigned long flags;
int enabled, ret;
char *buf = NULL;
@@ -714,16 +733,8 @@ static ssize_t svs_enable_debug_write(struct file *filp,
return ret;
if (!enabled) {
- spin_lock_irqsave(&svs_lock, flags);
- svsp->pbank = svsb;
+ svs_bank_disable_and_restore_default_volts(svsp, svsb);
svsb->mode_support = SVSB_MODE_ALL_DISABLE;
- svs_switch_bank(svsp);
- svs_writel_relaxed(svsp, SVSB_PTPEN_OFF, SVSEN);
- svs_writel_relaxed(svsp, SVSB_INTSTS_VAL_CLEAN, INTSTS);
- spin_unlock_irqrestore(&svs_lock, flags);
-
- svsb->phase = SVSB_PHASE_ERROR;
- svs_adjust_pm_opp_volts(svsb);
}
kfree(buf);
@@ -1540,7 +1551,6 @@ static int svs_suspend(struct device *dev)
{
struct svs_platform *svsp = dev_get_drvdata(dev);
struct svs_bank *svsb;
- unsigned long flags;
int ret;
u32 idx;
@@ -1549,17 +1559,7 @@ static int svs_suspend(struct device *dev)
for (idx = 0; idx < svsp->bank_max; idx++) {
svsb = &svsp->banks[idx];
-
- /* This might wait for svs_isr() process */
- spin_lock_irqsave(&svs_lock, flags);
- svsp->pbank = svsb;
- svs_switch_bank(svsp);
- svs_writel_relaxed(svsp, SVSB_PTPEN_OFF, SVSEN);
- svs_writel_relaxed(svsp, SVSB_INTSTS_VAL_CLEAN, INTSTS);
- spin_unlock_irqrestore(&svs_lock, flags);
-
- svsb->phase = SVSB_PHASE_ERROR;
- svs_adjust_pm_opp_volts(svsb);
+ svs_bank_disable_and_restore_default_volts(svsp, svsb);
}
ret = reset_control_assert(svsp->rst);
--
2.18.0
next prev parent reply other threads:[~2022-12-26 9:43 UTC|newest]
Thread overview: 22+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-12-26 9:42 [PATCH v1 0/13] Enahance SVS's robustness Roger Lu
2022-12-26 9:42 ` [PATCH v1 01/13] soc: mediatek: mtk-svs: enable the IRQ later Roger Lu
2022-12-26 9:42 ` [PATCH v1 02/13] soc: mediatek: mtk-svs: clean up platform probing Roger Lu
2022-12-26 9:42 ` [PATCH v1 03/13] soc: mediatek: mtk-svs: improve readability of platform_probe Roger Lu
2022-12-26 9:42 ` [PATCH v1 04/13] soc: mediatek: mtk-svs: move svs_platform_probe into probe Roger Lu
2022-12-26 9:42 ` [PATCH v1 05/13] soc: mediatek: mtk-svs: delete superfluous platform data entries Roger Lu
2022-12-26 9:42 ` [PATCH v1 06/13] soc: mediatek: mtk-svs: use svs get efuse common function Roger Lu
2022-12-26 9:42 ` [PATCH v1 07/13] soc: mtk-svs: mt8183: refactor o_slope calculation Roger Lu
2023-01-03 12:49 ` AngeloGioacchino Del Regno
2022-12-26 9:42 ` [PATCH v1 08/13] soc: mediatek: mtk-svs: add main_clk check during system-wide suspend Roger Lu
2022-12-26 9:42 ` Roger Lu [this message]
2023-01-03 12:49 ` [PATCH v1 09/13] soc: mediatek: mtk-svs: use common function to disable restore voltages AngeloGioacchino Del Regno
2022-12-26 9:42 ` [PATCH v1 10/13] soc: mediatek: mtk-svs: restore default voltages when svs init02 fail Roger Lu
2023-01-03 12:49 ` AngeloGioacchino Del Regno
2023-01-10 5:30 ` Roger Lu (陸瑞傑)
2022-12-26 9:42 ` [PATCH v1 11/13] soc: mediatek: mtk-svs: add thermal voltage compensation if needed Roger Lu
2023-01-03 12:49 ` AngeloGioacchino Del Regno
2022-12-26 9:42 ` [PATCH v1 12/13] soc: mediatek: mtk-svs: Use pm_runtime_resume_and_get() in svs_init01() Roger Lu
2023-01-03 12:49 ` AngeloGioacchino Del Regno
2022-12-26 9:42 ` [PATCH v1 13/13] soc: mediatek: mtk-svs: keep svs alive even though debug cmd create fail Roger Lu
2023-01-03 12:49 ` AngeloGioacchino Del Regno
2023-01-10 5:35 ` Roger Lu (陸瑞傑)
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20221226094248.4506-10-roger.lu@mediatek.com \
--to=roger.lu@mediatek.com \
--cc=Project_Global_Chrome_Upstream_Group@mediatek.com \
--cc=devicetree@vger.kernel.org \
--cc=drinkcat@google.com \
--cc=eballetbo@gmail.com \
--cc=fan.chen@mediatek.com \
--cc=jia-wei.chang@mediatek.com \
--cc=khilman@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mediatek@lists.infradead.org \
--cc=linux-pm@vger.kernel.org \
--cc=matthias.bgg@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox