From: Roger Lu <roger.lu@mediatek.com>
To: Matthias Brugger <matthias.bgg@gmail.com>,
Enric Balletbo Serra <eballetbo@gmail.com>,
Kevin Hilman <khilman@kernel.org>,
Nicolas Boichat <drinkcat@google.com>
Cc: Fan Chen <fan.chen@mediatek.com>,
Roger Lu <roger.lu@mediatek.com>,
Jia-wei Chang <jia-wei.chang@mediatek.com>,
<devicetree@vger.kernel.org>,
<linux-arm-kernel@lists.infradead.org>,
<linux-mediatek@lists.infradead.org>,
<linux-kernel@vger.kernel.org>, <linux-pm@vger.kernel.org>,
<Project_Global_Chrome_Upstream_Group@mediatek.com>
Subject: [PATCH v1 11/13] soc: mediatek: mtk-svs: add thermal voltage compensation if needed
Date: Mon, 26 Dec 2022 17:42:46 +0800 [thread overview]
Message-ID: <20221226094248.4506-12-roger.lu@mediatek.com> (raw)
In-Reply-To: <20221226094248.4506-1-roger.lu@mediatek.com>
Some extreme test environment may keep IC temperature very low or very high
during system boot stage. For stability concern, we add thermal voltage
compenstation if needed no matter svs bank phase is in init02 or mon mode.
Signed-off-by: Roger Lu <roger.lu@mediatek.com>
---
drivers/soc/mediatek/mtk-svs.c | 17 +++++++++--------
1 file changed, 9 insertions(+), 8 deletions(-)
diff --git a/drivers/soc/mediatek/mtk-svs.c b/drivers/soc/mediatek/mtk-svs.c
index 3a2be5ced8e6..dacfee4a0b32 100644
--- a/drivers/soc/mediatek/mtk-svs.c
+++ b/drivers/soc/mediatek/mtk-svs.c
@@ -557,7 +557,7 @@ static int svs_adjust_pm_opp_volts(struct svs_bank *svsb)
}
/* Get thermal effect */
- if (svsb->phase == SVSB_PHASE_MON) {
+ if (!IS_ERR_OR_NULL(svsb->tzd)) {
ret = thermal_zone_get_temp(svsb->tzd, &tzone_temp);
if (ret || (svsb->temp > SVSB_TEMP_UPPER_BOUND &&
svsb->temp < SVSB_TEMP_LOWER_BOUND)) {
@@ -572,7 +572,8 @@ static int svs_adjust_pm_opp_volts(struct svs_bank *svsb)
temp_voffset += svsb->tzone_ltemp_voffset;
/* 2-line bank update all opp volts when running mon mode */
- if (svsb->type == SVSB_HIGH || svsb->type == SVSB_LOW) {
+ if (svsb->phase == SVSB_PHASE_MON && (svsb->type == SVSB_HIGH ||
+ svsb->type == SVSB_LOW)) {
opp_start = 0;
opp_stop = svsb->opp_count;
}
@@ -588,11 +589,6 @@ static int svs_adjust_pm_opp_volts(struct svs_bank *svsb)
/* do nothing */
goto unlock_mutex;
case SVSB_PHASE_INIT02:
- svsb_volt = max(svsb->volt[i], svsb->vmin);
- opp_volt = svs_bank_volt_to_opp_volt(svsb_volt,
- svsb->volt_step,
- svsb->volt_base);
- break;
case SVSB_PHASE_MON:
svsb_volt = max(svsb->volt[i] + temp_voffset, svsb->vmin);
opp_volt = svs_bank_volt_to_opp_volt(svsb_volt,
@@ -1680,7 +1676,7 @@ static int svs_bank_resource_setup(struct svs_platform *svsp)
}
}
- if (svsb->mode_support & SVSB_MODE_MON) {
+ if (!IS_ERR_OR_NULL(svsb->tzone_name)) {
svsb->tzd = thermal_zone_get_zone_by_name(svsb->tzone_name);
if (IS_ERR(svsb->tzd)) {
dev_err(svsb->dev, "cannot get \"%s\" thermal zone\n",
@@ -2124,6 +2120,7 @@ static struct svs_bank svs_mt8192_banks[] = {
.type = SVSB_LOW,
.set_freq_pct = svs_set_bank_freq_pct_v3,
.get_volts = svs_get_bank_volts_v3,
+ .tzone_name = "gpu1",
.volt_flags = SVSB_REMOVE_DVTFIXED_VOLT,
.mode_support = SVSB_MODE_INIT02,
.opp_count = MAX_OPP_ENTRIES,
@@ -2141,6 +2138,10 @@ static struct svs_bank svs_mt8192_banks[] = {
.core_sel = 0x0fff0100,
.int_st = BIT(0),
.ctl0 = 0x00540003,
+ .tzone_htemp = 85000,
+ .tzone_htemp_voffset = 0,
+ .tzone_ltemp = 25000,
+ .tzone_ltemp_voffset = 7,
},
{
.sw_id = SVSB_GPU,
--
2.18.0
next prev parent reply other threads:[~2022-12-26 9:43 UTC|newest]
Thread overview: 22+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-12-26 9:42 [PATCH v1 0/13] Enahance SVS's robustness Roger Lu
2022-12-26 9:42 ` [PATCH v1 01/13] soc: mediatek: mtk-svs: enable the IRQ later Roger Lu
2022-12-26 9:42 ` [PATCH v1 02/13] soc: mediatek: mtk-svs: clean up platform probing Roger Lu
2022-12-26 9:42 ` [PATCH v1 03/13] soc: mediatek: mtk-svs: improve readability of platform_probe Roger Lu
2022-12-26 9:42 ` [PATCH v1 04/13] soc: mediatek: mtk-svs: move svs_platform_probe into probe Roger Lu
2022-12-26 9:42 ` [PATCH v1 05/13] soc: mediatek: mtk-svs: delete superfluous platform data entries Roger Lu
2022-12-26 9:42 ` [PATCH v1 06/13] soc: mediatek: mtk-svs: use svs get efuse common function Roger Lu
2022-12-26 9:42 ` [PATCH v1 07/13] soc: mtk-svs: mt8183: refactor o_slope calculation Roger Lu
2023-01-03 12:49 ` AngeloGioacchino Del Regno
2022-12-26 9:42 ` [PATCH v1 08/13] soc: mediatek: mtk-svs: add main_clk check during system-wide suspend Roger Lu
2022-12-26 9:42 ` [PATCH v1 09/13] soc: mediatek: mtk-svs: use common function to disable restore voltages Roger Lu
2023-01-03 12:49 ` AngeloGioacchino Del Regno
2022-12-26 9:42 ` [PATCH v1 10/13] soc: mediatek: mtk-svs: restore default voltages when svs init02 fail Roger Lu
2023-01-03 12:49 ` AngeloGioacchino Del Regno
2023-01-10 5:30 ` Roger Lu (陸瑞傑)
2022-12-26 9:42 ` Roger Lu [this message]
2023-01-03 12:49 ` [PATCH v1 11/13] soc: mediatek: mtk-svs: add thermal voltage compensation if needed AngeloGioacchino Del Regno
2022-12-26 9:42 ` [PATCH v1 12/13] soc: mediatek: mtk-svs: Use pm_runtime_resume_and_get() in svs_init01() Roger Lu
2023-01-03 12:49 ` AngeloGioacchino Del Regno
2022-12-26 9:42 ` [PATCH v1 13/13] soc: mediatek: mtk-svs: keep svs alive even though debug cmd create fail Roger Lu
2023-01-03 12:49 ` AngeloGioacchino Del Regno
2023-01-10 5:35 ` Roger Lu (陸瑞傑)
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20221226094248.4506-12-roger.lu@mediatek.com \
--to=roger.lu@mediatek.com \
--cc=Project_Global_Chrome_Upstream_Group@mediatek.com \
--cc=devicetree@vger.kernel.org \
--cc=drinkcat@google.com \
--cc=eballetbo@gmail.com \
--cc=fan.chen@mediatek.com \
--cc=jia-wei.chang@mediatek.com \
--cc=khilman@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mediatek@lists.infradead.org \
--cc=linux-pm@vger.kernel.org \
--cc=matthias.bgg@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox