[PATCH v2 4/4] arm64: dts: qcom: sdm670: add opps for peripherals

Richard Acayan
2022-12-30T00:15:58Z

The interconnects are now in place. Add Operating Performance Points for
them to allow the kernel to properly manage them.

Signed-off-by: Richard Acayan <mailingradian@gmail.com>
---
arch/arm64/boot/dts/qcom/sdm670.dtsi | 109 +++++++++++++++++++++++++++
1 file changed, 109 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/sdm670.dtsi b/arch/arm64/boot/dts/qcom/sdm670.dtsi
index 67a7428291e2..78a99c549486 100644
--- a/arch/arm64/boot/dts/qcom/sdm670.dtsi
+++ b/arch/arm64/boot/dts/qcom/sdm670.dtsi
@@ -10,6 +10,7 @@
#include <dt-bindings/clock/qcom,rpmh.h>
#include <dt-bindings/dma/qcom-gpi.h>
#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interconnect/qcom,sdm670-rpmh.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/phy/phy-qcom-qusb2.h>
#include <dt-bindings/power/qcom-rpmpd.h>
@@ -418,6 +419,10 @@ sdhc_1: mmc@7c4000 {
<&gcc GCC_SDCC1_ICE_CORE_CLK>,
<&gcc GCC_AGGRE_UFS_PHY_AXI_CLK>;
clock-names = "iface", "core", "xo", "ice", "bus";
+ interconnects = <&aggre1_noc MASTER_EMMC 0 &aggre1_noc SLAVE_A1NOC_SNOC 0>,
+ <&gladiator_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_EMMC_CFG 0>;
+ interconnect-names = "sdhc-ddr", "cpu-sdhc";
+ operating-points-v2 = <&sdhc1_opp_table>;

iommus = <&apps_smmu 0x140 0xf>;

@@ -430,6 +435,38 @@ sdhc_1: mmc@7c4000 {
non-removable;

status = "disabled";
+
+ sdhc1_opp_table: opp-table {
+ compatible = "operating-points-v2";
+
+ opp-20000000 {
+ opp-hz = /bits/ 64 <20000000>;
+ required-opps = <&rpmhpd_opp_min_svs>;
+ opp-peak-kBps = <80000 80000>;
+ opp-avg-kBps = <52286 80000>;
+ };
+
+ opp-50000000 {
+ opp-hz = /bits/ 64 <50000000>;
+ required-opps = <&rpmhpd_opp_low_svs>;
+ opp-peak-kBps = <200000 100000>;
+ opp-avg-kBps = <130718 100000>;
+ };
+
+ opp-100000000 {
+ opp-hz = /bits/ 64 <100000000>;
+ required-opps = <&rpmhpd_opp_svs>;
+ opp-peak-kBps = <200000 130000>;
+ opp-avg-kBps = <130718 130000>;
+ };
+
+ opp-384000000 {
+ opp-hz = /bits/ 64 <384000000>;
+ required-opps = <&rpmhpd_opp_nom>;
+ opp-peak-kBps = <4096000 4096000>;
+ opp-avg-kBps = <1338562 1338562>;
+ };
+ };
};

gpi_dma0: dma-controller@800000 {
@@ -465,6 +502,8 @@ qupv3_id_0: geniqup@8c0000 {
#address-cells = <2>;
#size-cells = <2>;
ranges;
+ interconnects = <&aggre1_noc MASTER_BLSP_1 0 &config_noc SLAVE_BLSP_1 0>;
+ interconnect-names = "qup-core";
status = "disabled";

i2c0: i2c@880000 {
@@ -478,6 +517,10 @@ i2c0: i2c@880000 {
#address-cells = <1>;
#size-cells = <0>;
power-domains = <&rpmhpd SDM670_CX>;
+ interconnects = <&aggre1_noc MASTER_BLSP_1 0 &config_noc SLAVE_BLSP_1 0>,
+ <&gladiator_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_BLSP_1 0>,
+ <&aggre1_noc MASTER_BLSP_1 0 &mem_noc SLAVE_EBI_CH0 0>;
+ interconnect-names = "qup-core", "qup-config", "qup-memory";
dmas = <&gpi_dma0 0 0 QCOM_GPI_I2C>,
<&gpi_dma0 1 0 QCOM_GPI_I2C>;
dma-names = "tx", "rx";
@@ -495,6 +538,10 @@ i2c1: i2c@884000 {
#address-cells = <1>;
#size-cells = <0>;
power-domains = <&rpmhpd SDM670_CX>;
+ interconnects = <&aggre1_noc MASTER_BLSP_1 0 &config_noc SLAVE_BLSP_1 0>,
+ <&gladiator_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_BLSP_1 0>,
+ <&aggre1_noc MASTER_BLSP_1 0 &mem_noc SLAVE_EBI_CH0 0>;
+ interconnect-names = "qup-core", "qup-config", "qup-memory";
dmas = <&gpi_dma0 0 1 QCOM_GPI_I2C>,
<&gpi_dma0 1 1 QCOM_GPI_I2C>;
dma-names = "tx", "rx";
@@ -512,6 +559,10 @@ i2c2: i2c@888000 {
#address-cells = <1>;
#size-cells = <0>;
power-domains = <&rpmhpd SDM670_CX>;
+ interconnects = <&aggre1_noc MASTER_BLSP_1 0 &config_noc SLAVE_BLSP_1 0>,
+ <&gladiator_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_BLSP_1 0>,
+ <&aggre1_noc MASTER_BLSP_1 0 &mem_noc SLAVE_EBI_CH0 0>;
+ interconnect-names = "qup-core", "qup-config", "qup-memory";
dmas = <&gpi_dma0 0 2 QCOM_GPI_I2C>,
<&gpi_dma0 1 2 QCOM_GPI_I2C>;
dma-names = "tx", "rx";
@@ -529,6 +580,10 @@ i2c3: i2c@88c000 {
#address-cells = <1>;
#size-cells = <0>;
power-domains = <&rpmhpd SDM670_CX>;
+ interconnects = <&aggre1_noc MASTER_BLSP_1 0 &config_noc SLAVE_BLSP_1 0>,
+ <&gladiator_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_BLSP_1 0>,
+ <&aggre1_noc MASTER_BLSP_1 0 &mem_noc SLAVE_EBI_CH0 0>;
+ interconnect-names = "qup-core", "qup-config", "qup-memory";
dmas = <&gpi_dma0 0 3 QCOM_GPI_I2C>,
<&gpi_dma0 1 3 QCOM_GPI_I2C>;
dma-names = "tx", "rx";
@@ -546,6 +601,10 @@ i2c4: i2c@890000 {
#address-cells = <1>;
#size-cells = <0>;
power-domains = <&rpmhpd SDM670_CX>;
+ interconnects = <&aggre1_noc MASTER_BLSP_1 0 &config_noc SLAVE_BLSP_1 0>,
+ <&gladiator_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_BLSP_1 0>,
+ <&aggre1_noc MASTER_BLSP_1 0 &mem_noc SLAVE_EBI_CH0 0>;
+ interconnect-names = "qup-core", "qup-config", "qup-memory";
dmas = <&gpi_dma0 0 4 QCOM_GPI_I2C>,
<&gpi_dma0 1 4 QCOM_GPI_I2C>;
dma-names = "tx", "rx";
@@ -563,6 +622,10 @@ i2c5: i2c@894000 {
#address-cells = <1>;
#size-cells = <0>;
power-domains = <&rpmhpd SDM670_CX>;
+ interconnects = <&aggre1_noc MASTER_BLSP_1 0 &config_noc SLAVE_BLSP_1 0>,
+ <&gladiator_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_BLSP_1 0>,
+ <&aggre1_noc MASTER_BLSP_1 0 &mem_noc SLAVE_EBI_CH0 0>;
+ interconnect-names = "qup-core", "qup-config", "qup-memory";
dmas = <&gpi_dma0 0 5 QCOM_GPI_I2C>,
<&gpi_dma0 1 5 QCOM_GPI_I2C>;
dma-names = "tx", "rx";
@@ -580,6 +643,10 @@ i2c6: i2c@898000 {
#address-cells = <1>;
#size-cells = <0>;
power-domains = <&rpmhpd SDM670_CX>;
+ interconnects = <&aggre1_noc MASTER_BLSP_1 0 &config_noc SLAVE_BLSP_1 0>,
+ <&gladiator_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_BLSP_1 0>,
+ <&aggre1_noc MASTER_BLSP_1 0 &mem_noc SLAVE_EBI_CH0 0>;
+ interconnect-names = "qup-core", "qup-config", "qup-memory";
dmas = <&gpi_dma0 0 6 QCOM_GPI_I2C>,
<&gpi_dma0 1 6 QCOM_GPI_I2C>;
dma-names = "tx", "rx";
@@ -597,6 +664,10 @@ i2c7: i2c@89c000 {
#address-cells = <1>;
#size-cells = <0>;
power-domains = <&rpmhpd SDM670_CX>;
+ interconnects = <&aggre1_noc MASTER_BLSP_1 0 &config_noc SLAVE_BLSP_1 0>,
+ <&gladiator_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_BLSP_1 0>,
+ <&aggre1_noc MASTER_BLSP_1 0 &mem_noc SLAVE_EBI_CH0 0>;
+ interconnect-names = "qup-core", "qup-config", "qup-memory";
dmas = <&gpi_dma0 0 7 QCOM_GPI_I2C>,
<&gpi_dma0 1 7 QCOM_GPI_I2C>;
dma-names = "tx", "rx";
@@ -637,6 +708,8 @@ qupv3_id_1: geniqup@ac0000 {
#address-cells = <2>;
#size-cells = <2>;
ranges;
+ interconnects = <&aggre2_noc MASTER_BLSP_2 0 &config_noc SLAVE_BLSP_2 0>;
+ interconnect-names = "qup-core";
status = "disabled";

i2c8: i2c@a80000 {
@@ -650,6 +723,10 @@ i2c8: i2c@a80000 {
#address-cells = <1>;
#size-cells = <0>;
power-domains = <&rpmhpd SDM670_CX>;
+ interconnects = <&aggre2_noc MASTER_BLSP_2 0 &config_noc SLAVE_BLSP_2 0>,
+ <&gladiator_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_BLSP_2 0>,
+ <&aggre2_noc MASTER_BLSP_2 0 &mem_noc SLAVE_EBI_CH0 0>;
+ interconnect-names = "qup-core", "qup-config", "qup-memory";
dmas = <&gpi_dma1 0 0 QCOM_GPI_I2C>,
<&gpi_dma1 1 0 QCOM_GPI_I2C>;
dma-names = "tx", "rx";
@@ -667,6 +744,10 @@ i2c9: i2c@a84000 {
#address-cells = <1>;
#size-cells = <0>;
power-domains = <&rpmhpd SDM670_CX>;
+ interconnects = <&aggre2_noc MASTER_BLSP_2 0 &config_noc SLAVE_BLSP_2 0>,
+ <&gladiator_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_BLSP_2 0>,
+ <&aggre2_noc MASTER_BLSP_2 0 &mem_noc SLAVE_EBI_CH0 0>;
+ interconnect-names = "qup-core", "qup-config", "qup-memory";
dmas = <&gpi_dma1 0 1 QCOM_GPI_I2C>,
<&gpi_dma1 1 1 QCOM_GPI_I2C>;
dma-names = "tx", "rx";
@@ -684,6 +765,10 @@ i2c10: i2c@a88000 {
#address-cells = <1>;
#size-cells = <0>;
power-domains = <&rpmhpd SDM670_CX>;
+ interconnects = <&aggre2_noc MASTER_BLSP_2 0 &config_noc SLAVE_BLSP_2 0>,
+ <&gladiator_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_BLSP_2 0>,
+ <&aggre2_noc MASTER_BLSP_2 0 &mem_noc SLAVE_EBI_CH0 0>;
+ interconnect-names = "qup-core", "qup-config", "qup-memory";
dmas = <&gpi_dma1 0 2 QCOM_GPI_I2C>,
<&gpi_dma1 1 2 QCOM_GPI_I2C>;
dma-names = "tx", "rx";
@@ -701,6 +786,10 @@ i2c11: i2c@a8c000 {
#address-cells = <1>;
#size-cells = <0>;
power-domains = <&rpmhpd SDM670_CX>;
+ interconnects = <&aggre2_noc MASTER_BLSP_2 0 &config_noc SLAVE_BLSP_2 0>,
+ <&gladiator_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_BLSP_2 0>,
+ <&aggre2_noc MASTER_BLSP_2 0 &mem_noc SLAVE_EBI_CH0 0>;
+ interconnect-names = "qup-core", "qup-config", "qup-memory";
dmas = <&gpi_dma1 0 3 QCOM_GPI_I2C>,
<&gpi_dma1 1 3 QCOM_GPI_I2C>;
dma-names = "tx", "rx";
@@ -718,6 +807,10 @@ i2c12: i2c@a90000 {
#address-cells = <1>;
#size-cells = <0>;
power-domains = <&rpmhpd SDM670_CX>;
+ interconnects = <&aggre2_noc MASTER_BLSP_2 0 &config_noc SLAVE_BLSP_2 0>,
+ <&gladiator_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_BLSP_2 0>,
+ <&aggre2_noc MASTER_BLSP_2 0 &mem_noc SLAVE_EBI_CH0 0>;
+ interconnect-names = "qup-core", "qup-config", "qup-memory";
dmas = <&gpi_dma1 0 4 QCOM_GPI_I2C>,
<&gpi_dma1 1 4 QCOM_GPI_I2C>;
dma-names = "tx", "rx";
@@ -735,6 +828,10 @@ i2c13: i2c@a94000 {
#address-cells = <1>;
#size-cells = <0>;
power-domains = <&rpmhpd SDM670_CX>;
+ interconnects = <&aggre2_noc MASTER_BLSP_2 0 &config_noc SLAVE_BLSP_2 0>,
+ <&gladiator_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_BLSP_2 0>,
+ <&aggre2_noc MASTER_BLSP_2 0 &mem_noc SLAVE_EBI_CH0 0>;
+ interconnect-names = "qup-core", "qup-config", "qup-memory";
dmas = <&gpi_dma1 0 5 QCOM_GPI_I2C>,
<&gpi_dma1 1 5 QCOM_GPI_I2C>;
dma-names = "tx", "rx";
@@ -752,6 +849,10 @@ i2c14: i2c@a98000 {
#address-cells = <1>;
#size-cells = <0>;
power-domains = <&rpmhpd SDM670_CX>;
+ interconnects = <&aggre2_noc MASTER_BLSP_2 0 &config_noc SLAVE_BLSP_2 0>,
+ <&gladiator_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_BLSP_2 0>,
+ <&aggre2_noc MASTER_BLSP_2 0 &mem_noc SLAVE_EBI_CH0 0>;
+ interconnect-names = "qup-core", "qup-config", "qup-memory";
dmas = <&gpi_dma1 0 6 QCOM_GPI_I2C>,
<&gpi_dma1 1 6 QCOM_GPI_I2C>;
dma-names = "tx", "rx";
@@ -769,6 +870,10 @@ i2c15: i2c@a9c000 {
#address-cells = <1>;
#size-cells = <0>;
power-domains = <&rpmhpd SDM670_CX>;
+ interconnects = <&aggre2_noc MASTER_BLSP_2 0 &config_noc SLAVE_BLSP_2 0>,
+ <&gladiator_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_BLSP_2 0>,
+ <&aggre2_noc MASTER_BLSP_2 0 &mem_noc SLAVE_EBI_CH0 0>;
+ interconnect-names = "qup-core", "qup-config", "qup-memory";
dmas = <&gpi_dma1 0 7 QCOM_GPI_I2C>,
<&gpi_dma1 1 7 QCOM_GPI_I2C>;
dma-names = "tx", "rx";
@@ -1014,6 +1119,10 @@ usb_1: usb@a6f8800 {

resets = <&gcc GCC_USB30_PRIM_BCR>;

+ interconnects = <&aggre2_noc MASTER_USB3 0 &mem_noc SLAVE_EBI_CH0 0>,
+ <&gladiator_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_USB3 0>;
+ interconnect-names = "usb-ddr", "apps-usb";
+
status = "disabled";

usb_1_dwc3: usb@a600000 {
--
2.39.0