linux-pm.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Roger Lu <roger.lu@mediatek.com>
To: Matthias Brugger <matthias.bgg@gmail.com>,
	Enric Balletbo Serra <eballetbo@gmail.com>,
	Kevin Hilman <khilman@kernel.org>,
	Nicolas Boichat <drinkcat@google.com>
Cc: Fan Chen <fan.chen@mediatek.com>,
	Roger Lu <roger.lu@mediatek.com>,
	Jia-wei Chang <jia-wei.chang@mediatek.com>,
	<devicetree@vger.kernel.org>,
	<linux-arm-kernel@lists.infradead.org>,
	<linux-mediatek@lists.infradead.org>,
	<linux-kernel@vger.kernel.org>, <linux-pm@vger.kernel.org>,
	<Project_Global_Chrome_Upstream_Group@mediatek.com>
Subject: [PATCH v4 13/14] soc: mediatek: mtk-svs: use common function to disable restore voltages
Date: Wed, 11 Jan 2023 15:45:27 +0800	[thread overview]
Message-ID: <20230111074528.29354-14-roger.lu@mediatek.com> (raw)
In-Reply-To: <20230111074528.29354-1-roger.lu@mediatek.com>

The timing of disabling SVS bank and restore default voltage is more
than one place. Therefore, add a common function to use for removing
the superfluous codes.

Signed-off-by: Roger Lu <roger.lu@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
---
 drivers/soc/mediatek/mtk-svs.c | 54 ++++++++++++++--------------------
 1 file changed, 22 insertions(+), 32 deletions(-)

diff --git a/drivers/soc/mediatek/mtk-svs.c b/drivers/soc/mediatek/mtk-svs.c
index a7f0a6f02d52..89117807e85d 100644
--- a/drivers/soc/mediatek/mtk-svs.c
+++ b/drivers/soc/mediatek/mtk-svs.c
@@ -648,6 +648,25 @@ static int svs_adjust_pm_opp_volts(struct svs_bank *svsb)
 	return ret;
 }
 
+static void svs_bank_disable_and_restore_default_volts(struct svs_platform *svsp,
+						       struct svs_bank *svsb)
+{
+	unsigned long flags;
+
+	if (svsb->mode_support == SVSB_MODE_ALL_DISABLE)
+		return;
+
+	spin_lock_irqsave(&svs_lock, flags);
+	svsp->pbank = svsb;
+	svs_switch_bank(svsp);
+	svs_writel_relaxed(svsp, SVSB_PTPEN_OFF, SVSEN);
+	svs_writel_relaxed(svsp, SVSB_INTSTS_VAL_CLEAN, INTSTS);
+	spin_unlock_irqrestore(&svs_lock, flags);
+
+	svsb->phase = SVSB_PHASE_ERROR;
+	svs_adjust_pm_opp_volts(svsb);
+}
+
 #ifdef CONFIG_DEBUG_FS
 static int svs_dump_debug_show(struct seq_file *m, void *p)
 {
@@ -724,7 +743,6 @@ static ssize_t svs_enable_debug_write(struct file *filp,
 {
 	struct svs_bank *svsb = file_inode(filp)->i_private;
 	struct svs_platform *svsp = dev_get_drvdata(svsb->dev);
-	unsigned long flags;
 	int enabled, ret;
 	char *buf = NULL;
 
@@ -740,16 +758,8 @@ static ssize_t svs_enable_debug_write(struct file *filp,
 		return ret;
 
 	if (!enabled) {
-		spin_lock_irqsave(&svs_lock, flags);
-		svsp->pbank = svsb;
+		svs_bank_disable_and_restore_default_volts(svsp, svsb);
 		svsb->mode_support = SVSB_MODE_ALL_DISABLE;
-		svs_switch_bank(svsp);
-		svs_writel_relaxed(svsp, SVSB_PTPEN_OFF, SVSEN);
-		svs_writel_relaxed(svsp, SVSB_INTSTS_VAL_CLEAN, INTSTS);
-		spin_unlock_irqrestore(&svs_lock, flags);
-
-		svsb->phase = SVSB_PHASE_ERROR;
-		svs_adjust_pm_opp_volts(svsb);
 	}
 
 	kfree(buf);
@@ -1532,16 +1542,7 @@ static int svs_init02(struct svs_platform *svsp)
 out_of_init02:
 	for (idx = 0; idx < svsp->bank_max; idx++) {
 		svsb = &svsp->banks[idx];
-
-		spin_lock_irqsave(&svs_lock, flags);
-		svsp->pbank = svsb;
-		svs_switch_bank(svsp);
-		svs_writel_relaxed(svsp, SVSB_PTPEN_OFF, SVSEN);
-		svs_writel_relaxed(svsp, SVSB_INTSTS_VAL_CLEAN, INTSTS);
-		spin_unlock_irqrestore(&svs_lock, flags);
-
-		svsb->phase = SVSB_PHASE_ERROR;
-		svs_adjust_pm_opp_volts(svsb);
+		svs_bank_disable_and_restore_default_volts(svsp, svsb);
 	}
 
 	return ret;
@@ -1587,7 +1588,6 @@ static int svs_suspend(struct device *dev)
 {
 	struct svs_platform *svsp = dev_get_drvdata(dev);
 	struct svs_bank *svsb;
-	unsigned long flags;
 	int ret;
 	u32 idx;
 
@@ -1599,17 +1599,7 @@ static int svs_suspend(struct device *dev)
 
 	for (idx = 0; idx < svsp->bank_max; idx++) {
 		svsb = &svsp->banks[idx];
-
-		/* This might wait for svs_isr() process */
-		spin_lock_irqsave(&svs_lock, flags);
-		svsp->pbank = svsb;
-		svs_switch_bank(svsp);
-		svs_writel_relaxed(svsp, SVSB_PTPEN_OFF, SVSEN);
-		svs_writel_relaxed(svsp, SVSB_INTSTS_VAL_CLEAN, INTSTS);
-		spin_unlock_irqrestore(&svs_lock, flags);
-
-		svsb->phase = SVSB_PHASE_ERROR;
-		svs_adjust_pm_opp_volts(svsb);
+		svs_bank_disable_and_restore_default_volts(svsp, svsb);
 	}
 
 	ret = reset_control_assert(svsp->rst);
-- 
2.18.0


  parent reply	other threads:[~2023-01-11  7:46 UTC|newest]

Thread overview: 37+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2023-01-11  7:45 [PATCH v4 0/14] Enahance SVS's robustness Roger Lu
2023-01-11  7:45 ` [PATCH v4 01/14] soc: mediatek: mtk-svs: restore default voltages when svs_init02() fail Roger Lu
2023-01-31 13:22   ` Matthias Brugger
2023-01-11  7:45 ` [PATCH v4 02/14] soc: mediatek: mtk-svs: reset svs when svs_resume() fail Roger Lu
2023-01-31 13:22   ` Matthias Brugger
2023-01-11  7:45 ` [PATCH v4 03/14] soc: mediatek: mtk-svs: enable the IRQ later Roger Lu
2023-01-31 12:59   ` Matthias Brugger
2023-02-01 13:43     ` Roger Lu (陸瑞傑)
2023-02-01 13:47       ` Matthias Brugger
2023-01-11  7:45 ` [PATCH v4 04/14] soc: mediatek: mtk-svs: Use pm_runtime_resume_and_get() in svs_init01() Roger Lu
2023-01-31 13:23   ` Matthias Brugger
2023-01-11  7:45 ` [PATCH v4 05/14] soc: mediatek: mtk-svs: use svs clk control APIs Roger Lu
2023-01-31 13:19   ` Matthias Brugger
2023-02-01 12:28     ` Roger Lu (陸瑞傑)
2023-02-02 10:29       ` Matthias Brugger
2023-02-06  2:01         ` Roger Lu (陸瑞傑)
2023-02-06 12:09           ` Matthias Brugger
2023-02-11 11:34             ` Roger Lu (陸瑞傑)
2023-01-11  7:45 ` [PATCH v4 06/14] soc: mediatek: mtk-svs: add thermal voltage compensation if needed Roger Lu
2023-01-11  7:45 ` [PATCH v4 07/14] soc: mediatek: mtk-svs: keep svs alive if CONFIG_DEBUG_FS not supported Roger Lu
2023-01-31 13:24   ` Matthias Brugger
2023-01-11  7:45 ` [PATCH v4 08/14] soc: mediatek: mtk-svs: clean up platform probing Roger Lu
2023-01-31 13:24   ` Matthias Brugger
2023-01-11  7:45 ` [PATCH v4 09/14] soc: mediatek: mtk-svs: improve readability of platform_probe Roger Lu
2023-01-31 13:24   ` Matthias Brugger
2023-01-11  7:45 ` [PATCH v4 10/14] soc: mediatek: mtk-svs: move svs_platform_probe into probe Roger Lu
2023-01-31 13:25   ` Matthias Brugger
2023-01-11  7:45 ` [PATCH v4 11/14] soc: mediatek: mtk-svs: delete superfluous platform data entries Roger Lu
2023-01-31 13:30   ` Matthias Brugger
2023-01-11  7:45 ` [PATCH v4 12/14] soc: mediatek: mtk-svs: use svs get efuse common function Roger Lu
2023-01-31 13:37   ` Matthias Brugger
2023-02-01  8:15     ` Roger Lu (陸瑞傑)
2023-01-11  7:45 ` Roger Lu [this message]
2023-01-31 13:40   ` [PATCH v4 13/14] soc: mediatek: mtk-svs: use common function to disable restore voltages Matthias Brugger
2023-02-01  8:13     ` Roger Lu (陸瑞傑)
2023-01-11  7:45 ` [PATCH v4 14/14] soc: mtk-svs: mt8183: refactor o_slope calculation Roger Lu
2023-01-31 13:41   ` Matthias Brugger

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20230111074528.29354-14-roger.lu@mediatek.com \
    --to=roger.lu@mediatek.com \
    --cc=Project_Global_Chrome_Upstream_Group@mediatek.com \
    --cc=devicetree@vger.kernel.org \
    --cc=drinkcat@google.com \
    --cc=eballetbo@gmail.com \
    --cc=fan.chen@mediatek.com \
    --cc=jia-wei.chang@mediatek.com \
    --cc=khilman@kernel.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mediatek@lists.infradead.org \
    --cc=linux-pm@vger.kernel.org \
    --cc=matthias.bgg@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).