[PATCH v4 18/19] thermal/drivers/acerhdf: Make interval setting only at module load time

[Daniel Lezcano <daniel.lezcano@linaro.org>]

The thermal zone device structure is in the process of being private
to the thermal framework core code. This driver is directly accessing
and changing the monitoring polling rate.

After discussing with the maintainers of this driver, having the
polling interval at module loading time is enough for their purpose.

Change the code to take into account the interval when the module is
loaded but restrict the permissions so the value can not be changed
afterwards.

Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Acked-by: Peter Kaestle <peter@piie.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
---
 drivers/platform/x86/acerhdf.c | 12 +++---------
 1 file changed, 3 insertions(+), 9 deletions(-)

diff --git a/drivers/platform/x86/acerhdf.c b/drivers/platform/x86/acerhdf.c
index 1956469c3457..61f1c3090867 100644
--- a/drivers/platform/x86/acerhdf.c
+++ b/drivers/platform/x86/acerhdf.c
@@ -79,7 +79,6 @@ static unsigned int list_supported;
 static unsigned int fanstate = ACERHDF_FAN_AUTO;
 static char force_bios[16];
 static char force_product[16];
-static unsigned int prev_interval;
 static struct thermal_zone_device *thz_dev;
 static struct thermal_cooling_device *cl_dev;
 static struct platform_device *acerhdf_dev;
@@ -346,20 +345,15 @@ static void acerhdf_check_param(struct thermal_zone_device *thermal)
 	trips[0].temperature = fanon;
 	trips[0].hysteresis  = fanon - fanoff;
 
-	if (kernelmode && prev_interval != interval) {
+	if (kernelmode) {
 		if (interval > ACERHDF_MAX_INTERVAL) {
 			pr_err("interval too high, set to %d\n",
 			       ACERHDF_MAX_INTERVAL);
 			interval = ACERHDF_MAX_INTERVAL;
 		}
+
 		if (verbose)
 			pr_notice("interval changed to: %d\n", interval);
-
-		if (thermal)
-			thermal->polling_delay_jiffies =
-				round_jiffies(msecs_to_jiffies(interval * 1000));
-
-		prev_interval = interval;
 	}
 }
 
@@ -807,5 +801,5 @@ static const struct kernel_param_ops interval_ops = {
 	.get = param_get_uint,
 };
 
-module_param_cb(interval, &interval_ops, &interval, 0600);
+module_param_cb(interval, &interval_ops, &interval, 0000);
 MODULE_PARM_DESC(interval, "Polling interval of temperature check");
-- 
2.34.1