From: Conor Dooley <conor@kernel.org>
To: ulf.hansson@linaro.org
Cc: conor@kernel.org, Conor Dooley <conor.dooley@microchip.com>,
arnd@arndb.de, changhuang.liang@starfivetech.com,
jiajie.ho@starfivetech.com, linux-pm@vger.kernel.org,
linux-riscv@lists.infradead.org, robh@kernel.org,
walker.chen@starfivetech.com
Subject: [GIT PULL 5/5] pmdomain: starfive: Add JH7110 AON PMU support
Date: Wed, 13 Sep 2023 14:54:28 +0100 [thread overview]
Message-ID: <20230913-dude-imprecise-fc32622bc947@spud> (raw)
In-Reply-To: <20230913-bloomers-scorebook-fb45e0a2aa19@spud>
From: Changhuang Liang <changhuang.liang@starfivetech.com>
Add AON PMU for StarFive JH7110 SoC. It can be used to turn on/off the
dphy rx/tx power switch.
Reviewed-by: Walker Chen <walker.chen@starfivetech.com>
Signed-off-by: Changhuang Liang <changhuang.liang@starfivetech.com>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
---
MAINTAINERS | 1 +
drivers/pmdomain/starfive/jh71xx-pmu.c | 57 +++++++++++++++++++++++---
2 files changed, 53 insertions(+), 5 deletions(-)
diff --git a/MAINTAINERS b/MAINTAINERS
index 4d9e7d42412f..f1c34484c9b2 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -20512,6 +20512,7 @@ F: drivers/usb/cdns3/cdns3-starfive.c
STARFIVE JH71XX PMU CONTROLLER DRIVER
M: Walker Chen <walker.chen@starfivetech.com>
+M: Changhuang Liang <changhuang.liang@starfivetech.com>
S: Supported
F: Documentation/devicetree/bindings/power/starfive*
F: drivers/pmdomain/starfive/jh71xx-pmu.c
diff --git a/drivers/pmdomain/starfive/jh71xx-pmu.c b/drivers/pmdomain/starfive/jh71xx-pmu.c
index 547cd3b9df11..2724bee7e85f 100644
--- a/drivers/pmdomain/starfive/jh71xx-pmu.c
+++ b/drivers/pmdomain/starfive/jh71xx-pmu.c
@@ -2,7 +2,7 @@
/*
* StarFive JH71XX PMU (Power Management Unit) Controller Driver
*
- * Copyright (C) 2022 StarFive Technology Co., Ltd.
+ * Copyright (C) 2022-2023 StarFive Technology Co., Ltd.
*/
#include <linux/interrupt.h>
@@ -23,6 +23,9 @@
#define JH71XX_PMU_EVENT_STATUS 0x88
#define JH71XX_PMU_INT_STATUS 0x8C
+/* aon pmu register offset */
+#define JH71XX_AON_PMU_SWITCH 0x00
+
/* sw encourage cfg */
#define JH71XX_PMU_SW_ENCOURAGE_EN_LO 0x05
#define JH71XX_PMU_SW_ENCOURAGE_EN_HI 0x50
@@ -159,6 +162,26 @@ static int jh7110_pmu_set_state(struct jh71xx_pmu_dev *pmd, u32 mask, bool on)
return 0;
}
+static int jh7110_aon_pmu_set_state(struct jh71xx_pmu_dev *pmd, u32 mask, bool on)
+{
+ struct jh71xx_pmu *pmu = pmd->pmu;
+ unsigned long flags;
+ u32 val;
+
+ spin_lock_irqsave(&pmu->lock, flags);
+ val = readl(pmu->base + JH71XX_AON_PMU_SWITCH);
+
+ if (on)
+ val |= mask;
+ else
+ val &= ~mask;
+
+ writel(val, pmu->base + JH71XX_AON_PMU_SWITCH);
+ spin_unlock_irqrestore(&pmu->lock, flags);
+
+ return 0;
+}
+
static int jh71xx_pmu_set_state(struct jh71xx_pmu_dev *pmd, u32 mask, bool on)
{
struct jh71xx_pmu *pmu = pmd->pmu;
@@ -316,10 +339,12 @@ static int jh71xx_pmu_probe(struct platform_device *pdev)
if (!match_data)
return -EINVAL;
- ret = match_data->pmu_parse_irq(pdev, pmu);
- if (ret) {
- dev_err(dev, "failed to parse irq\n");
- return ret;
+ if (match_data->pmu_parse_irq) {
+ ret = match_data->pmu_parse_irq(pdev, pmu);
+ if (ret) {
+ dev_err(dev, "failed to parse irq\n");
+ return ret;
+ }
}
pmu->genpd = devm_kcalloc(dev, match_data->num_domains,
@@ -393,10 +418,31 @@ static const struct jh71xx_pmu_match_data jh7110_pmu = {
.pmu_set_state = jh7110_pmu_set_state,
};
+static const struct jh71xx_domain_info jh7110_aon_power_domains[] = {
+ [JH7110_PD_DPHY_TX] = {
+ .name = "DPHY-TX",
+ .bit = 30,
+ },
+ [JH7110_PD_DPHY_RX] = {
+ .name = "DPHY-RX",
+ .bit = 31,
+ },
+};
+
+static const struct jh71xx_pmu_match_data jh7110_aon_pmu = {
+ .num_domains = ARRAY_SIZE(jh7110_aon_power_domains),
+ .domain_info = jh7110_aon_power_domains,
+ .pmu_status = JH71XX_AON_PMU_SWITCH,
+ .pmu_set_state = jh7110_aon_pmu_set_state,
+};
+
static const struct of_device_id jh71xx_pmu_of_match[] = {
{
.compatible = "starfive,jh7110-pmu",
.data = (void *)&jh7110_pmu,
+ }, {
+ .compatible = "starfive,jh7110-aon-syscon",
+ .data = (void *)&jh7110_aon_pmu,
}, {
/* sentinel */
}
@@ -413,5 +459,6 @@ static struct platform_driver jh71xx_pmu_driver = {
builtin_platform_driver(jh71xx_pmu_driver);
MODULE_AUTHOR("Walker Chen <walker.chen@starfivetech.com>");
+MODULE_AUTHOR("Changhuang Liang <changhuang.liang@starfivetech.com>");
MODULE_DESCRIPTION("StarFive JH71XX PMU Driver");
MODULE_LICENSE("GPL");
--
2.39.2
next prev parent reply other threads:[~2023-09-13 13:56 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-09-13 13:54 [GIT PULL 0/5] Missed starfive pmdomain changes for v6.6, now for v6.7 Conor Dooley
2023-09-13 13:54 ` [GIT PULL 1/5] pmdomain: starfive: Explicitly include correct DT includes Conor Dooley
2023-09-13 13:54 ` [GIT PULL 2/5] dt-bindings: power: Add power-domain header for JH7110 Conor Dooley
2023-09-26 10:55 ` Geert Uytterhoeven
2023-09-26 11:20 ` Conor Dooley
2023-09-27 1:31 ` Changhuang Liang
2023-09-27 1:24 ` Changhuang Liang
2023-09-27 7:12 ` Geert Uytterhoeven
2023-09-27 13:26 ` Changhuang Liang
2023-09-13 13:54 ` [GIT PULL 3/5] pmdomain: starfive: Replace SOC_STARFIVE with ARCH_STARFIVE Conor Dooley
2023-09-13 13:54 ` [GIT PULL 4/5] pmdomain: starfive: Extract JH7110 pmu private operations Conor Dooley
2023-09-13 13:54 ` Conor Dooley [this message]
2023-09-13 22:30 ` [GIT PULL 0/5] Missed starfive pmdomain changes for v6.6, now for v6.7 Ulf Hansson
2023-09-14 6:46 ` Conor Dooley
2023-09-14 13:57 ` Rob Herring
2023-09-14 14:09 ` Ulf Hansson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230913-dude-imprecise-fc32622bc947@spud \
--to=conor@kernel.org \
--cc=arnd@arndb.de \
--cc=changhuang.liang@starfivetech.com \
--cc=conor.dooley@microchip.com \
--cc=jiajie.ho@starfivetech.com \
--cc=linux-pm@vger.kernel.org \
--cc=linux-riscv@lists.infradead.org \
--cc=robh@kernel.org \
--cc=ulf.hansson@linaro.org \
--cc=walker.chen@starfivetech.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox