From: Sunil V L <sunilvl@ventanamicro.com>
To: linux-pm@vger.kernel.org, linux-riscv@lists.infradead.org,
linux-kernel@vger.kernel.org, linux-acpi@vger.kernel.org
Cc: "Rafael J . Wysocki" <rafael@kernel.org>,
Pavel Machek <pavel@ucw.cz>,
Paul Walmsley <paul.walmsley@sifive.com>,
Palmer Dabbelt <palmer@dabbelt.com>,
Albert Ou <aou@eecs.berkeley.edu>, Len Brown <lenb@kernel.org>,
Anup Patel <anup@brainfault.org>,
Daniel Lezcano <daniel.lezcano@linaro.org>,
Andrew Jones <ajones@ventanamicro.com>,
Conor Dooley <conor.dooley@microchip.com>,
Atish Kumar Patra <atishp@rivosinc.com>,
Sunil V L <sunilvl@ventanamicro.com>
Subject: [PATCH v3 -next 1/3] cpuidle: RISC-V: Move few functions to arch/riscv
Date: Thu, 18 Jan 2024 11:59:28 +0530 [thread overview]
Message-ID: <20240118062930.245937-2-sunilvl@ventanamicro.com> (raw)
In-Reply-To: <20240118062930.245937-1-sunilvl@ventanamicro.com>
To support ACPI Low Power Idle (LPI), few functions are required which
are currently static functions in the DT based cpuidle driver. Hence,
move them under arch/riscv so that ACPI driver also can use them. Since
they are no longer static functions, append "riscv_" prefix to the
function name.
Signed-off-by: Sunil V L <sunilvl@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
---
arch/riscv/include/asm/suspend.h | 3 ++
arch/riscv/kernel/suspend.c | 49 +++++++++++++++++++++++++++++
drivers/cpuidle/cpuidle-riscv-sbi.c | 49 +++--------------------------
3 files changed, 57 insertions(+), 44 deletions(-)
diff --git a/arch/riscv/include/asm/suspend.h b/arch/riscv/include/asm/suspend.h
index 02f87867389a..076f8a9437cf 100644
--- a/arch/riscv/include/asm/suspend.h
+++ b/arch/riscv/include/asm/suspend.h
@@ -55,4 +55,7 @@ int hibernate_resume_nonboot_cpu_disable(void);
asmlinkage void hibernate_restore_image(unsigned long resume_satp, unsigned long satp_temp,
unsigned long cpu_resume);
asmlinkage int hibernate_core_restore_code(void);
+bool riscv_sbi_hsm_is_supported(void);
+bool riscv_sbi_suspend_state_is_valid(u32 state);
+int riscv_sbi_hart_suspend(u32 state);
#endif
diff --git a/arch/riscv/kernel/suspend.c b/arch/riscv/kernel/suspend.c
index 239509367e42..b20f2cb5879f 100644
--- a/arch/riscv/kernel/suspend.c
+++ b/arch/riscv/kernel/suspend.c
@@ -128,4 +128,53 @@ static int __init sbi_system_suspend_init(void)
}
arch_initcall(sbi_system_suspend_init);
+
+static int sbi_suspend_finisher(unsigned long suspend_type,
+ unsigned long resume_addr,
+ unsigned long opaque)
+{
+ struct sbiret ret;
+
+ ret = sbi_ecall(SBI_EXT_HSM, SBI_EXT_HSM_HART_SUSPEND,
+ suspend_type, resume_addr, opaque, 0, 0, 0);
+
+ return (ret.error) ? sbi_err_map_linux_errno(ret.error) : 0;
+}
+
+int riscv_sbi_hart_suspend(u32 state)
+{
+ if (state & SBI_HSM_SUSP_NON_RET_BIT)
+ return cpu_suspend(state, sbi_suspend_finisher);
+ else
+ return sbi_suspend_finisher(state, 0, 0);
+}
+
+bool riscv_sbi_suspend_state_is_valid(u32 state)
+{
+ if (state > SBI_HSM_SUSPEND_RET_DEFAULT &&
+ state < SBI_HSM_SUSPEND_RET_PLATFORM)
+ return false;
+
+ if (state > SBI_HSM_SUSPEND_NON_RET_DEFAULT &&
+ state < SBI_HSM_SUSPEND_NON_RET_PLATFORM)
+ return false;
+
+ return true;
+}
+
+bool riscv_sbi_hsm_is_supported(void)
+{
+ /*
+ * The SBI HSM suspend function is only available when:
+ * 1) SBI version is 0.3 or higher
+ * 2) SBI HSM extension is available
+ */
+ if (sbi_spec_version < sbi_mk_version(0, 3) ||
+ !sbi_probe_extension(SBI_EXT_HSM)) {
+ pr_info("HSM suspend not available\n");
+ return false;
+ }
+
+ return true;
+}
#endif /* CONFIG_RISCV_SBI */
diff --git a/drivers/cpuidle/cpuidle-riscv-sbi.c b/drivers/cpuidle/cpuidle-riscv-sbi.c
index e8094fc92491..a6e123dfe394 100644
--- a/drivers/cpuidle/cpuidle-riscv-sbi.c
+++ b/drivers/cpuidle/cpuidle-riscv-sbi.c
@@ -73,26 +73,6 @@ static inline bool sbi_is_domain_state_available(void)
return data->available;
}
-static int sbi_suspend_finisher(unsigned long suspend_type,
- unsigned long resume_addr,
- unsigned long opaque)
-{
- struct sbiret ret;
-
- ret = sbi_ecall(SBI_EXT_HSM, SBI_EXT_HSM_HART_SUSPEND,
- suspend_type, resume_addr, opaque, 0, 0, 0);
-
- return (ret.error) ? sbi_err_map_linux_errno(ret.error) : 0;
-}
-
-static int sbi_suspend(u32 state)
-{
- if (state & SBI_HSM_SUSP_NON_RET_BIT)
- return cpu_suspend(state, sbi_suspend_finisher);
- else
- return sbi_suspend_finisher(state, 0, 0);
-}
-
static __cpuidle int sbi_cpuidle_enter_state(struct cpuidle_device *dev,
struct cpuidle_driver *drv, int idx)
{
@@ -100,9 +80,9 @@ static __cpuidle int sbi_cpuidle_enter_state(struct cpuidle_device *dev,
u32 state = states[idx];
if (state & SBI_HSM_SUSP_NON_RET_BIT)
- return CPU_PM_CPU_IDLE_ENTER_PARAM(sbi_suspend, idx, state);
+ return CPU_PM_CPU_IDLE_ENTER_PARAM(riscv_sbi_hart_suspend, idx, state);
else
- return CPU_PM_CPU_IDLE_ENTER_RETENTION_PARAM(sbi_suspend,
+ return CPU_PM_CPU_IDLE_ENTER_RETENTION_PARAM(riscv_sbi_hart_suspend,
idx, state);
}
@@ -133,7 +113,7 @@ static __cpuidle int __sbi_enter_domain_idle_state(struct cpuidle_device *dev,
else
state = states[idx];
- ret = sbi_suspend(state) ? -1 : idx;
+ ret = riscv_sbi_hart_suspend(state) ? -1 : idx;
ct_cpuidle_exit();
@@ -206,17 +186,6 @@ static const struct of_device_id sbi_cpuidle_state_match[] = {
{ },
};
-static bool sbi_suspend_state_is_valid(u32 state)
-{
- if (state > SBI_HSM_SUSPEND_RET_DEFAULT &&
- state < SBI_HSM_SUSPEND_RET_PLATFORM)
- return false;
- if (state > SBI_HSM_SUSPEND_NON_RET_DEFAULT &&
- state < SBI_HSM_SUSPEND_NON_RET_PLATFORM)
- return false;
- return true;
-}
-
static int sbi_dt_parse_state_node(struct device_node *np, u32 *state)
{
int err = of_property_read_u32(np, "riscv,sbi-suspend-param", state);
@@ -226,7 +195,7 @@ static int sbi_dt_parse_state_node(struct device_node *np, u32 *state)
return err;
}
- if (!sbi_suspend_state_is_valid(*state)) {
+ if (!riscv_sbi_suspend_state_is_valid(*state)) {
pr_warn("Invalid SBI suspend state %#x\n", *state);
return -EINVAL;
}
@@ -607,16 +576,8 @@ static int __init sbi_cpuidle_init(void)
int ret;
struct platform_device *pdev;
- /*
- * The SBI HSM suspend function is only available when:
- * 1) SBI version is 0.3 or higher
- * 2) SBI HSM extension is available
- */
- if ((sbi_spec_version < sbi_mk_version(0, 3)) ||
- !sbi_probe_extension(SBI_EXT_HSM)) {
- pr_info("HSM suspend not available\n");
+ if (!riscv_sbi_hsm_is_supported())
return 0;
- }
ret = platform_driver_register(&sbi_cpuidle_driver);
if (ret)
--
2.34.1
next prev parent reply other threads:[~2024-01-18 6:29 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-01-18 6:29 [PATCH v3 -next 0/3] RISC-V: ACPI: Add LPI support Sunil V L
2024-01-18 6:29 ` Sunil V L [this message]
2024-01-18 6:29 ` [PATCH v3 -next 2/3] ACPI: RISC-V: Add LPI driver Sunil V L
2024-03-18 5:33 ` Drew Fustini
2024-03-18 8:42 ` Sunil V L
2024-01-18 6:29 ` [PATCH v3 -next 3/3] ACPI: Enable ACPI_PROCESSOR for RISC-V Sunil V L
2024-02-15 4:37 ` [PATCH v3 -next 0/3] RISC-V: ACPI: Add LPI support Sunil V L
2024-03-15 12:31 ` Rafael J. Wysocki
2024-03-15 2:59 ` Drew Fustini
2024-03-15 5:53 ` Sunil V L
2024-03-20 20:50 ` patchwork-bot+linux-riscv
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240118062930.245937-2-sunilvl@ventanamicro.com \
--to=sunilvl@ventanamicro.com \
--cc=ajones@ventanamicro.com \
--cc=anup@brainfault.org \
--cc=aou@eecs.berkeley.edu \
--cc=atishp@rivosinc.com \
--cc=conor.dooley@microchip.com \
--cc=daniel.lezcano@linaro.org \
--cc=lenb@kernel.org \
--cc=linux-acpi@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pm@vger.kernel.org \
--cc=linux-riscv@lists.infradead.org \
--cc=palmer@dabbelt.com \
--cc=paul.walmsley@sifive.com \
--cc=pavel@ucw.cz \
--cc=rafael@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).