[PATCH 1/5] dt-bindings: qcom,spmi-temp-alarm: Add compatible for GEN2 rev2 temp alarm

[Anjelique Melendez <quic_amelende@quicinc.com>]

Add compatible "qcom,spmi-temp-alarm-gen2-rev2" for SPMI temp alarm GEN2
revision 2 peripherals. GEN2 rev2 peripherals have individual temp DAC
registers to set temperature thresholds for over-temperature stages 1-3.
Registers are configured based on thermal zone trip definition.

Signed-off-by: Anjelique Melendez <quic_amelende@quicinc.com>
---
 .../devicetree/bindings/thermal/qcom,spmi-temp-alarm.yaml   | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

diff --git a/Documentation/devicetree/bindings/thermal/qcom,spmi-temp-alarm.yaml b/Documentation/devicetree/bindings/thermal/qcom,spmi-temp-alarm.yaml
index 30b22151aa82..f9af88d51c2d 100644
--- a/Documentation/devicetree/bindings/thermal/qcom,spmi-temp-alarm.yaml
+++ b/Documentation/devicetree/bindings/thermal/qcom,spmi-temp-alarm.yaml
@@ -12,14 +12,16 @@ maintainers:
 description:
   QPNP temperature alarm peripherals are found inside of Qualcomm PMIC chips
   that utilize the Qualcomm SPMI implementation. These peripherals provide an
-  interrupt signal and status register to identify high PMIC die temperature.
+  interrupt signal and status registers to identify high PMIC die temperature.
 
 allOf:
   - $ref: thermal-sensor.yaml#
 
 properties:
   compatible:
-    const: qcom,spmi-temp-alarm
+    enum:
+      - qcom,spmi-temp-alarm
+      - qcom,spmi-temp-alarm-gen2-rev2
 
   reg:
     maxItems: 1
-- 
2.34.1