From: Conor Dooley <conor@kernel.org>
To: claudiu beznea <claudiu.beznea@tuxon.dev>
Cc: vkoul@kernel.org, kishon@kernel.org, robh@kernel.org,
krzk+dt@kernel.org, conor+dt@kernel.org, p.zabel@pengutronix.de,
geert+renesas@glider.be, magnus.damm@gmail.com,
gregkh@linuxfoundation.org, mturquette@baylibre.com,
sboyd@kernel.org, yoshihiro.shimoda.uh@renesas.com,
biju.das.jz@bp.renesas.com, ulf.hansson@linaro.org,
linux-phy@lists.infradead.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org, linux-renesas-soc@vger.kernel.org,
linux-usb@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
linux-clk@vger.kernel.org, linux-pm@vger.kernel.org,
Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Subject: Re: [PATCH 02/16] dt-bindings: soc: renesas: renesas,rzg2l-sysc: Add #reset-cells for RZ/G3S
Date: Mon, 26 Aug 2024 18:09:09 +0100 [thread overview]
Message-ID: <20240826-daycare-freewill-c0e1400bf255@spud> (raw)
In-Reply-To: <7b16791b-0d7b-49a1-82aa-c4db99ff2bfd@tuxon.dev>
[-- Attachment #1: Type: text/plain, Size: 3946 bytes --]
On Mon, Aug 26, 2024 at 01:15:43PM +0300, claudiu beznea wrote:
>
>
> On 23.08.2024 19:33, Conor Dooley wrote:
> > On Fri, Aug 23, 2024 at 07:26:42PM +0300, claudiu beznea wrote:
> >> On 23.08.2024 19:18, Conor Dooley wrote:
> >>> On Fri, Aug 23, 2024 at 10:54:06AM +0300, claudiu beznea wrote:
> >>>> Hi, Conor,
> >>>>
> >>>> On 22.08.2024 19:42, Conor Dooley wrote:
> >>>>> On Thu, Aug 22, 2024 at 06:27:47PM +0300, Claudiu wrote:
> >>>>>> From: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
> >>>>>>
> >>>>>> The RZ/G3S System controller has registers to control signals that need
> >>>>>> to be de-asserted/asserted before/after different SoC areas are power
> >>>>>> on/off. This signals are implemented as reset signals. For this document
> >>>>>> the #reset-cells property.
> >>>>>>
> >>>>>> Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
> >>>>>> ---
> >>>>>> .../bindings/soc/renesas/renesas,rzg2l-sysc.yaml | 16 ++++++++++++++++
> >>>>>> 1 file changed, 16 insertions(+)
> >>>>>>
> >>>>>> diff --git a/Documentation/devicetree/bindings/soc/renesas/renesas,rzg2l-sysc.yaml b/Documentation/devicetree/bindings/soc/renesas/renesas,rzg2l-sysc.yaml
> >>>>>> index 4386b2c3fa4d..6b0bb34485d9 100644
> >>>>>> --- a/Documentation/devicetree/bindings/soc/renesas/renesas,rzg2l-sysc.yaml
> >>>>>> +++ b/Documentation/devicetree/bindings/soc/renesas/renesas,rzg2l-sysc.yaml
> >>>>>> @@ -42,12 +42,28 @@ properties:
> >>>>>> - const: cm33stbyr_int
> >>>>>> - const: ca55_deny
> >>>>>>
> >>>>>> + "#reset-cells":
> >>>>>> + const: 1
> >>>>>> +
> >>>>>> required:
> >>>>>> - compatible
> >>>>>> - reg
> >>>>>>
> >>>>>> additionalProperties: false
> >>>>>>
> >>>>>> +allOf:
> >>>>>> + - if:
> >>>>>> + properties:
> >>>>>> + compatible:
> >>>>>> + contains:
> >>>>>> + const: renesas,r9a08g045-sysc
> >>>>>> + then:
> >>>>>> + required:
> >>>>>> + - "#reset-cells"
> >>>>>
> >>>>> Given this is new required property on an existing platform, I'd expect
> >>>>> some mention of why it used to be okay to not have this but is now
> >>>>> required. Did firmware or a bootloader stage take things out of reset?
> >>>>
> >>>> On previous SoCs the SYS controller has no support for controlling the
> >>>> signals going to different peripherals (USB, PCIE in case of RZ/G3S).
> >>>> I'll add a note about this on next version.
> >>>
> >>> My initial thought here wasn't about previous SoCs though, it was
> >>> because you didn't add the compatible in this series for /this/ SoC.
> >>
> >> RZ/G3S compatible is already present in this file:
> >> https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/Documentation/devicetree/bindings/soc/renesas/renesas,rzg2l-sysc.yaml#n26
> >
> > I know, first thing I did when I read the original patch was open the
> > file ;)
> > I don't care about the old SoCs, cos you're not applying the property to
> > them, so what's changed between SoCs isn't really relevant. It's a mention
> > of why, on this SoC, it is safe to add new required properties that I want.
>
>
> >
> > AFAIU the answer is that no consumer of the resets existed before, so
>
> That's true.
>
> > there's not some special state there, and I am guessing that the new
> > sysc driver you're adding isn't going to fail to probe if there are no
> > resets,
>
> That's true.
>
> it just won't register a reset controller?
>
> It will register it but,
>
> the new sysc driver is going to probe only for this SoC (RZ/G3S). On RZ/G3S
> we have 2 resets. These well be registered unconditionally, currently, only
> for RZ/G3S. If there will be no DT users for it then it should be no
> problem, AFAICT.
Okay, sounds it doesn't break for existing devicetrees.
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Thanks,
Conor.
[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 228 bytes --]
next prev parent reply other threads:[~2024-08-26 17:09 UTC|newest]
Thread overview: 98+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-08-22 15:27 [PATCH 00/16] Add initial USB support for the Renesas RZ/G3S SoC Claudiu
2024-08-22 15:27 ` [PATCH 01/16] clk: renesas: r9a08g045: Add clocks, resets and power domains for USB Claudiu
2024-08-29 12:35 ` Geert Uytterhoeven
2024-08-22 15:27 ` [PATCH 02/16] dt-bindings: soc: renesas: renesas,rzg2l-sysc: Add #reset-cells for RZ/G3S Claudiu
2024-08-22 16:42 ` Conor Dooley
2024-08-22 16:44 ` Conor Dooley
2024-08-23 7:59 ` claudiu beznea
2024-08-23 7:54 ` claudiu beznea
2024-08-23 16:18 ` Conor Dooley
2024-08-23 16:26 ` claudiu beznea
2024-08-23 16:33 ` Conor Dooley
2024-08-26 10:15 ` claudiu beznea
2024-08-26 17:09 ` Conor Dooley [this message]
2024-10-08 13:24 ` Geert Uytterhoeven
2024-08-22 15:27 ` [PATCH 03/16] dt-bindings: reset: renesas,r9a08g045-sysc: Add reset IDs for RZ/G3S SYSC reset Claudiu
2024-08-22 16:45 ` Conor Dooley
2024-10-08 13:25 ` Geert Uytterhoeven
2024-08-22 15:27 ` [PATCH 04/16] soc: renesas: Add SYSC driver for Renesas RZ/G3S Claudiu
2024-09-24 11:32 ` Geert Uytterhoeven
2024-09-25 7:50 ` claudiu beznea
2024-10-08 13:54 ` Geert Uytterhoeven
2024-08-22 15:27 ` [PATCH 05/16] soc: renesas: sysc: Move RZ/G3S SoC detection on SYSC driver Claudiu
2024-10-08 13:23 ` Geert Uytterhoeven
2024-10-09 8:26 ` claudiu beznea
2024-08-22 15:27 ` [PATCH 06/16] dt-bindings: reset: renesas,rzg2l-usbphy-ctrl: Document RZ/G3S SoC Claudiu
2024-08-22 16:45 ` Conor Dooley
2024-10-08 14:46 ` Geert Uytterhoeven
2024-08-22 15:27 ` [PATCH 07/16] reset: rzg2l-usbphy-ctrl: Get reset control array Claudiu
2024-08-23 7:25 ` Biju Das
2024-08-23 8:05 ` claudiu beznea
2024-08-23 8:17 ` Biju Das
2024-10-08 14:46 ` Geert Uytterhoeven
2024-08-22 15:27 ` [PATCH 08/16] reset: rzg2l-usbphy-ctrl: Add support for RZ/G3S Claudiu
2024-08-22 16:59 ` Biju Das
2024-08-23 8:40 ` claudiu beznea
2024-08-23 8:46 ` Biju Das
2024-10-08 14:47 ` Geert Uytterhoeven
2024-08-22 15:27 ` [PATCH 09/16] dt-bindings: usb: renesas,usbhs: Document RZ/G3S SoC Claudiu
2024-08-22 16:46 ` Conor Dooley
2024-10-08 14:51 ` Geert Uytterhoeven
2024-10-09 8:28 ` claudiu beznea
2024-08-22 15:27 ` [PATCH 10/16] phy: renesas: rcar-gen3-usb2: Add support to initialize the bus Claudiu
2024-08-23 7:35 ` Biju Das
2024-08-23 8:57 ` claudiu beznea
2024-08-23 9:01 ` Biju Das
2024-08-30 8:02 ` Vinod Koul
2024-08-30 8:06 ` Biju Das
2024-10-08 14:57 ` Geert Uytterhoeven
2024-10-09 8:31 ` claudiu beznea
2024-08-22 15:27 ` [PATCH 11/16] dt-bindings: phy: renesas,usb2-phy: Document RZ/G3S phy bindings Claudiu
2024-08-22 16:46 ` Conor Dooley
2024-10-08 14:58 ` Geert Uytterhoeven
2024-08-22 15:27 ` [PATCH 12/16] phy: renesas: rcar-gen3-usb2: Add support for the RZ/G3S SoC Claudiu
2024-10-08 14:59 ` Geert Uytterhoeven
2024-08-22 15:27 ` [PATCH 13/16] arm64: dts: renesas: Add #reset-cells to system controller node Claudiu
2024-10-08 14:59 ` Geert Uytterhoeven
2024-08-22 15:27 ` [PATCH 14/16] arm64: dts: renesas: r9a08g045: Add USB support Claudiu
2024-10-08 15:00 ` Geert Uytterhoeven
2024-08-22 15:28 ` [PATCH 15/16] arm64: dts: renesas: rzg3s-smarc: Enable " Claudiu
2024-10-08 15:16 ` Geert Uytterhoeven
2024-10-09 8:42 ` claudiu beznea
2024-08-22 15:28 ` [PATCH 16/16] arm64: defconfig: Enable RZ/G3S SYSC reset driver Claudiu
2024-10-08 15:17 ` Geert Uytterhoeven
2024-08-29 15:26 ` [PATCH 00/16] Add initial USB support for the Renesas RZ/G3S SoC Ulf Hansson
2024-08-30 8:22 ` claudiu beznea
2024-08-30 10:14 ` Ulf Hansson
2024-08-30 11:32 ` claudiu beznea
2024-08-31 10:32 ` Ulf Hansson
2024-09-03 10:35 ` Ulf Hansson
2024-09-03 10:58 ` claudiu beznea
2024-09-03 11:50 ` Ulf Hansson
2024-08-31 5:13 ` Biju Das
2024-09-02 7:54 ` Biju Das
2024-09-02 8:47 ` claudiu beznea
2024-09-02 8:53 ` Biju Das
2024-09-02 9:14 ` claudiu beznea
2024-09-02 9:18 ` Biju Das
2024-09-02 10:40 ` claudiu beznea
2024-09-02 10:47 ` Biju Das
2024-09-03 7:18 ` Biju Das
2024-09-03 10:25 ` claudiu beznea
2024-09-03 10:31 ` Biju Das
2024-09-03 11:00 ` claudiu beznea
2024-09-03 11:07 ` Biju Das
2024-09-03 12:00 ` Biju Das
2024-09-03 12:25 ` claudiu beznea
2024-09-03 12:37 ` Biju Das
2024-09-03 12:57 ` claudiu beznea
2024-09-03 13:09 ` Biju Das
2024-09-03 14:46 ` claudiu beznea
2024-09-03 15:30 ` Biju Das
2024-09-03 13:45 ` Biju Das
2024-09-03 14:48 ` claudiu beznea
2024-11-07 10:00 ` Claudiu Beznea
2024-11-07 16:22 ` Philipp Zabel
2024-09-03 10:19 ` claudiu beznea
2024-09-02 8:28 ` claudiu beznea
2024-08-30 8:10 ` (subset) " Vinod Koul
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240826-daycare-freewill-c0e1400bf255@spud \
--to=conor@kernel.org \
--cc=biju.das.jz@bp.renesas.com \
--cc=claudiu.beznea.uj@bp.renesas.com \
--cc=claudiu.beznea@tuxon.dev \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=geert+renesas@glider.be \
--cc=gregkh@linuxfoundation.org \
--cc=kishon@kernel.org \
--cc=krzk+dt@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-clk@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-phy@lists.infradead.org \
--cc=linux-pm@vger.kernel.org \
--cc=linux-renesas-soc@vger.kernel.org \
--cc=linux-usb@vger.kernel.org \
--cc=magnus.damm@gmail.com \
--cc=mturquette@baylibre.com \
--cc=p.zabel@pengutronix.de \
--cc=robh@kernel.org \
--cc=sboyd@kernel.org \
--cc=ulf.hansson@linaro.org \
--cc=vkoul@kernel.org \
--cc=yoshihiro.shimoda.uh@renesas.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox