Linux Power Management development
 help / color / mirror / Atom feed
From: Antheas Kapenekakis <lkml@antheas.dev>
To: linux-pm@vger.kernel.org
Cc: platform-driver-x86@vger.kernel.org, Mario.Limonciello@amd.com,
	luke@ljones.dev, me@kylegospodneti.ch
Subject: [PATCH v1 4/4] platform/x86: asus-wmi: remove Ally (1st gen) and Ally X suspend quirk
Date: Thu, 19 Sep 2024 19:19:52 +0200	[thread overview]
Message-ID: <20240919171952.403745-5-lkml@antheas.dev> (raw)
In-Reply-To: <20240919171952.403745-1-lkml@antheas.dev>

By moving the Display On/Off calls outside of the suspend sequence,
the racing conditions that made the Ally controller suspend unreliable
are completely fixed. This includes both when mcu_powersave is enabled
and disabled. Therefore, remove the quirk that fixes them only when
mcu_powersave is disabled.

Signed-off-by: Antheas Kapenekakis <lkml@antheas.dev>
---
 drivers/platform/x86/asus-wmi.c | 54 ---------------------------------
 1 file changed, 54 deletions(-)

diff --git a/drivers/platform/x86/asus-wmi.c b/drivers/platform/x86/asus-wmi.c
index 37636e5a38e3..2c9656e0afda 100644
--- a/drivers/platform/x86/asus-wmi.c
+++ b/drivers/platform/x86/asus-wmi.c
@@ -137,29 +137,10 @@ module_param(fnlock_default, bool, 0444);
 #define ASUS_MINI_LED_2024_STRONG	0x01
 #define ASUS_MINI_LED_2024_OFF		0x02
 
-/* Controls the power state of the USB0 hub on ROG Ally which input is on */
-#define ASUS_USB0_PWR_EC0_CSEE "\\_SB.PCI0.SBRG.EC0.CSEE"
-/* 300ms so far seems to produce a reliable result on AC and battery */
-#define ASUS_USB0_PWR_EC0_CSEE_WAIT 1500
-
 static const char * const ashs_ids[] = { "ATK4001", "ATK4002", NULL };
 
 static int throttle_thermal_policy_write(struct asus_wmi *);
 
-static const struct dmi_system_id asus_ally_mcu_quirk[] = {
-	{
-		.matches = {
-			DMI_MATCH(DMI_BOARD_NAME, "RC71L"),
-		},
-	},
-	{
-		.matches = {
-			DMI_MATCH(DMI_BOARD_NAME, "RC72L"),
-		},
-	},
-	{ },
-};
-
 static bool ashs_present(void)
 {
 	int i = 0;
@@ -269,9 +250,6 @@ struct asus_wmi {
 	u32 tablet_switch_dev_id;
 	bool tablet_switch_inverted;
 
-	/* The ROG Ally device requires the MCU USB device be disconnected before suspend */
-	bool ally_mcu_usb_switch;
-
 	enum fan_type fan_type;
 	enum fan_type gpu_fan_type;
 	enum fan_type mid_fan_type;
@@ -4698,8 +4676,6 @@ static int asus_wmi_add(struct platform_device *pdev)
 	asus->egpu_enable_available = asus_wmi_dev_is_present(asus, ASUS_WMI_DEVID_EGPU);
 	asus->dgpu_disable_available = asus_wmi_dev_is_present(asus, ASUS_WMI_DEVID_DGPU);
 	asus->kbd_rgb_state_available = asus_wmi_dev_is_present(asus, ASUS_WMI_DEVID_TUF_RGB_STATE);
-	asus->ally_mcu_usb_switch = acpi_has_method(NULL, ASUS_USB0_PWR_EC0_CSEE)
-						&& dmi_check_system(asus_ally_mcu_quirk);
 
 	if (asus_wmi_dev_is_present(asus, ASUS_WMI_DEVID_MINI_LED_MODE))
 		asus->mini_led_dev_id = ASUS_WMI_DEVID_MINI_LED_MODE;
@@ -4892,34 +4868,6 @@ static int asus_hotk_resume(struct device *device)
 	return 0;
 }
 
-static int asus_hotk_resume_early(struct device *device)
-{
-	struct asus_wmi *asus = dev_get_drvdata(device);
-
-	if (asus->ally_mcu_usb_switch) {
-		/* sleep required to prevent USB0 being yanked then reappearing rapidly */
-		if (ACPI_FAILURE(acpi_execute_simple_method(NULL, ASUS_USB0_PWR_EC0_CSEE, 0xB8)))
-			dev_err(device, "ROG Ally MCU failed to connect USB dev\n");
-		else
-			msleep(ASUS_USB0_PWR_EC0_CSEE_WAIT);
-	}
-	return 0;
-}
-
-static int asus_hotk_prepare(struct device *device)
-{
-	struct asus_wmi *asus = dev_get_drvdata(device);
-
-	if (asus->ally_mcu_usb_switch) {
-		/* sleep required to ensure USB0 is disabled before sleep continues */
-		if (ACPI_FAILURE(acpi_execute_simple_method(NULL, ASUS_USB0_PWR_EC0_CSEE, 0xB7)))
-			dev_err(device, "ROG Ally MCU failed to disconnect USB dev\n");
-		else
-			msleep(ASUS_USB0_PWR_EC0_CSEE_WAIT);
-	}
-	return 0;
-}
-
 static int asus_hotk_restore(struct device *device)
 {
 	struct asus_wmi *asus = dev_get_drvdata(device);
@@ -4964,8 +4912,6 @@ static const struct dev_pm_ops asus_pm_ops = {
 	.thaw = asus_hotk_thaw,
 	.restore = asus_hotk_restore,
 	.resume = asus_hotk_resume,
-	.resume_early = asus_hotk_resume_early,
-	.prepare = asus_hotk_prepare,
 };
 
 /* Registration ***************************************************************/
-- 
2.46.1


  parent reply	other threads:[~2024-09-19 17:20 UTC|newest]

Thread overview: 23+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2024-09-19 17:19 [PATCH v1 0/4] acpi/x86: s2idle: move Display off/on calls outside suspend (fixes ROG Ally suspend) Antheas Kapenekakis
2024-09-19 17:19 ` [PATCH v1 1/4] acpi/x86: s2idle: add support for screen off and screen on callbacks Antheas Kapenekakis
2024-09-19 17:29   ` Mario Limonciello
2024-09-19 17:36     ` Antheas Kapenekakis
2024-09-19 20:17       ` Mario Limonciello
2024-09-19 17:19 ` [PATCH v1 2/4] acpi/x86: s2idle: handle screen off/on calls outside of suspend sequence Antheas Kapenekakis
2024-09-19 17:35   ` Mario Limonciello
2024-09-19 18:21     ` Alex Deucher
2024-09-19 18:32       ` Mario Limonciello
2024-09-19 18:35         ` Antheas Kapenekakis
2024-09-19 17:19 ` [PATCH v1 3/4] acpi/x86: s2idle: call screen on and off as part of callbacks Antheas Kapenekakis
2024-09-19 19:01   ` Mario Limonciello
2024-09-19 20:45     ` Antheas Kapenekakis
2024-09-19 20:51       ` Mario Limonciello
2024-09-19 20:54         ` Antheas Kapenekakis
2024-09-21  1:03           ` Denis Benato
2024-09-21  6:22             ` Antheas Kapenekakis
2024-09-21 14:47               ` Denis Benato
2024-09-21 19:44                 ` Antheas Kapenekakis
2024-09-22  2:07                   ` Denis Benato
2024-09-22  7:48                     ` Antheas Kapenekakis
2024-09-19 17:19 ` Antheas Kapenekakis [this message]
2024-09-19 18:36   ` [PATCH v1 4/4] platform/x86: asus-wmi: remove Ally (1st gen) and Ally X suspend quirk Mario Limonciello

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20240919171952.403745-5-lkml@antheas.dev \
    --to=lkml@antheas.dev \
    --cc=Mario.Limonciello@amd.com \
    --cc=linux-pm@vger.kernel.org \
    --cc=luke@ljones.dev \
    --cc=me@kylegospodneti.ch \
    --cc=platform-driver-x86@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox