From: Dzmitry Sankouski <dsankouski@gmail.com>
To: Sebastian Reichel <sre@kernel.org>,
Chanwoo Choi <cw00.choi@samsung.com>,
Krzysztof Kozlowski <krzk@kernel.org>,
Lee Jones <lee@kernel.org>, Rob Herring <robh@kernel.org>,
Conor Dooley <conor+dt@kernel.org>,
Dmitry Torokhov <dmitry.torokhov@gmail.com>,
Pavel Machek <pavel@ucw.cz>, Hans de Goede <hdegoede@redhat.com>,
Marek Szyprowski <m.szyprowski@samsung.com>,
Sebastian Krzyszkowiak <sebastian.krzyszkowiak@puri.sm>,
Purism Kernel Team <kernel@puri.sm>
Cc: linux-pm@vger.kernel.org, linux-kernel@vger.kernel.org,
devicetree@vger.kernel.org, linux-input@vger.kernel.org,
linux-leds@vger.kernel.org,
Dzmitry Sankouski <dsankouski@gmail.com>
Subject: [PATCH v11 3/9] dt-bindings: power: supply: max17042: split on 2 files
Date: Mon, 09 Dec 2024 14:26:27 +0300 [thread overview]
Message-ID: <20241209-starqltechn_integration_upstream-v11-3-dc0598828e01@gmail.com> (raw)
In-Reply-To: <20241209-starqltechn_integration_upstream-v11-0-dc0598828e01@gmail.com>
Move max17042 common binding part to separate file, to
reuse it for MFDs with platform driver version.
Signed-off-by: Dzmitry Sankouski <dsankouski@gmail.com>
---
Documentation/devicetree/bindings/power/supply/maxim,max17042-base.yaml | 66 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Documentation/devicetree/bindings/power/supply/maxim,max17042.yaml | 49 +------------------------------------------------
MAINTAINERS | 2 +-
3 files changed, 68 insertions(+), 49 deletions(-)
diff --git a/Documentation/devicetree/bindings/power/supply/maxim,max17042-base.yaml b/Documentation/devicetree/bindings/power/supply/maxim,max17042-base.yaml
new file mode 100644
index 000000000000..1653f8ae11f7
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/supply/maxim,max17042-base.yaml
@@ -0,0 +1,66 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/supply/maxim,max17042-base.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Maxim 17042 fuel gauge series
+
+maintainers:
+ - Sebastian Reichel <sre@kernel.org>
+
+allOf:
+ - $ref: power-supply.yaml#
+
+properties:
+ compatible:
+ enum:
+ - maxim,max17042
+ - maxim,max17047
+ - maxim,max17050
+ - maxim,max17055
+ - maxim,max77705-battery
+ - maxim,max77849-battery
+
+ interrupts:
+ maxItems: 1
+ description: |
+ The ALRT pin, an open-drain interrupt.
+
+ maxim,rsns-microohm:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: |
+ Resistance of rsns resistor in micro Ohms (datasheet-recommended value is 10000).
+ Defining this property enables current-sense functionality.
+
+ maxim,cold-temp:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: |
+ Temperature threshold to report battery as cold (in tenths of degree Celsius).
+ Default is not to report cold events.
+
+ maxim,over-heat-temp:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: |
+ Temperature threshold to report battery as over heated (in tenths of degree Celsius).
+ Default is not to report over heating events.
+
+ maxim,dead-volt:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: |
+ Voltage threshold to report battery as dead (in mV).
+ Default is not to report dead battery events.
+
+ maxim,over-volt:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: |
+ Voltage threshold to report battery as over voltage (in mV).
+ Default is not to report over-voltage events.
+
+ power-supplies: true
+
+required:
+ - compatible
+
+additionalProperties: false
+
diff --git a/Documentation/devicetree/bindings/power/supply/maxim,max17042.yaml b/Documentation/devicetree/bindings/power/supply/maxim,max17042.yaml
index 14242de7fc08..b7fd714cc72e 100644
--- a/Documentation/devicetree/bindings/power/supply/maxim,max17042.yaml
+++ b/Documentation/devicetree/bindings/power/supply/maxim,max17042.yaml
@@ -10,60 +10,13 @@ maintainers:
- Sebastian Reichel <sre@kernel.org>
allOf:
- - $ref: power-supply.yaml#
+ - $ref: maxim,max17042-base.yaml#
properties:
- compatible:
- enum:
- - maxim,max17042
- - maxim,max17047
- - maxim,max17050
- - maxim,max17055
- - maxim,max77705-battery
- - maxim,max77849-battery
-
reg:
maxItems: 1
- interrupts:
- maxItems: 1
- description: |
- The ALRT pin, an open-drain interrupt.
-
- maxim,rsns-microohm:
- $ref: /schemas/types.yaml#/definitions/uint32
- description: |
- Resistance of rsns resistor in micro Ohms (datasheet-recommended value is 10000).
- Defining this property enables current-sense functionality.
-
- maxim,cold-temp:
- $ref: /schemas/types.yaml#/definitions/uint32
- description: |
- Temperature threshold to report battery as cold (in tenths of degree Celsius).
- Default is not to report cold events.
-
- maxim,over-heat-temp:
- $ref: /schemas/types.yaml#/definitions/uint32
- description: |
- Temperature threshold to report battery as over heated (in tenths of degree Celsius).
- Default is not to report over heating events.
-
- maxim,dead-volt:
- $ref: /schemas/types.yaml#/definitions/uint32
- description: |
- Voltage threshold to report battery as dead (in mV).
- Default is not to report dead battery events.
-
- maxim,over-volt:
- $ref: /schemas/types.yaml#/definitions/uint32
- description: |
- Voltage threshold to report battery as over voltage (in mV).
- Default is not to report over-voltage events.
-
- power-supplies: true
-
required:
- - compatible
- reg
additionalProperties: false
diff --git a/MAINTAINERS b/MAINTAINERS
index 7700208f6ccf..cd5532afbfe4 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -14157,7 +14157,7 @@ R: Sebastian Krzyszkowiak <sebastian.krzyszkowiak@puri.sm>
R: Purism Kernel Team <kernel@puri.sm>
L: linux-pm@vger.kernel.org
S: Maintained
-F: Documentation/devicetree/bindings/power/supply/maxim,max17042.yaml
+F: Documentation/devicetree/bindings/power/supply/maxim,max17042*.yaml
F: drivers/power/supply/max17042_battery.c
MAXIM MAX20086 CAMERA POWER PROTECTOR DRIVER
--
2.39.5
next prev parent reply other threads:[~2024-12-09 11:29 UTC|newest]
Thread overview: 17+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-12-09 11:26 [PATCH v11 0/9] Add support for Maxim Integrated MAX77705 PMIC Dzmitry Sankouski
2024-12-09 11:26 ` [PATCH v11 1/9] power: supply: add undervoltage health status property Dzmitry Sankouski
2024-12-09 11:26 ` [PATCH v11 2/9] dt-bindings: power: supply: max17042: add max77705 support Dzmitry Sankouski
2024-12-09 11:26 ` Dzmitry Sankouski [this message]
2024-12-09 12:40 ` [PATCH v11 3/9] dt-bindings: power: supply: max17042: split on 2 files Rob Herring (Arm)
2024-12-10 7:38 ` Krzysztof Kozlowski
2024-12-11 14:59 ` Dzmitry Sankouski
2024-12-18 7:56 ` Krzysztof Kozlowski
2024-12-09 11:26 ` [PATCH v11 4/9] dt-bindings: mfd: add maxim,max77705 Dzmitry Sankouski
2024-12-10 7:40 ` Krzysztof Kozlowski
2024-12-09 11:26 ` [PATCH v11 5/9] power: supply: max17042: add max77705 fuel gauge support Dzmitry Sankouski
2024-12-09 11:26 ` [PATCH v11 6/9] mfd: Add new driver for MAX77705 PMIC Dzmitry Sankouski
2024-12-10 22:02 ` Christophe JAILLET
2024-12-09 11:26 ` [PATCH v11 7/9] input: max77693: add max77705 haptic support Dzmitry Sankouski
2024-12-09 11:26 ` [PATCH v11 8/9] power: supply: max77705: Add charger driver for Maxim 77705 Dzmitry Sankouski
2024-12-10 22:07 ` Christophe JAILLET
2024-12-09 11:26 ` [PATCH v11 9/9] leds: max77705: Add LEDs support Dzmitry Sankouski
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20241209-starqltechn_integration_upstream-v11-3-dc0598828e01@gmail.com \
--to=dsankouski@gmail.com \
--cc=conor+dt@kernel.org \
--cc=cw00.choi@samsung.com \
--cc=devicetree@vger.kernel.org \
--cc=dmitry.torokhov@gmail.com \
--cc=hdegoede@redhat.com \
--cc=kernel@puri.sm \
--cc=krzk@kernel.org \
--cc=lee@kernel.org \
--cc=linux-input@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-leds@vger.kernel.org \
--cc=linux-pm@vger.kernel.org \
--cc=m.szyprowski@samsung.com \
--cc=pavel@ucw.cz \
--cc=robh@kernel.org \
--cc=sebastian.krzyszkowiak@puri.sm \
--cc=sre@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox