From: Bjorn Helgaas <helgaas@kernel.org>
To: Kenneth Crudup <kenny@panix.com>,
"David E. Box" <david.e.box@linux.intel.com>,
Nirmal Patel <nirmal.patel@linux.ntel.com>
Cc: Kai-Heng Feng <kai.heng.feng@canonical.com>,
Vidya Sagar <vidyas@nvidia.com>,
Bjorn Helgaas <bhelgaas@google.com>,
Andrea Righi <andrea.righi@canonical.com>,
You-Sheng Yang <vicamo.yang@canonical.com>,
linux-pm@vger.kernel.org, linux-pci@vger.kernel.org
Subject: Re: My AlderLake Dell (XPS-9320) needs these patches to get full standby/low-power modes
Date: Fri, 13 Dec 2024 17:02:14 -0600 [thread overview]
Message-ID: <20241213230214.GA3434438@bhelgaas> (raw)
In-Reply-To: <0f708fdf-ca54-488f-8c7e-160c1164308a@panix.com>
[cc->to: David, Nirmal]
On Fri, Dec 13, 2024 at 02:26:37PM -0800, Kenneth Crudup wrote:
> OK, it looks like the effective change (that's not already contained in the
> LTR SNOOP patches already in Linus' master (et al.)) comes from this line
> from the Ubuntu commit 1a0102a0 ("UBUNTU: SAUCE: PCI/ASPM: Enable ASPM for
> links under VMD domain"):
>
> ----
> diff --git a/drivers/pci/pcie/aspm.c b/drivers/pci/pcie/aspm.c
> index 00143f5fb83a..d2ff44e7fbb1 100644
> --- a/drivers/pci/pcie/aspm.c
> +++ b/drivers/pci/pcie/aspm.c
> @@ -688,7 +688,8 @@ static void pcie_aspm_cap_init(struct pcie_link_state
> *link, int blacklist)
> aspm_l1ss_init(link);
>
> /* Save default state */
> - link->aspm_default = link->aspm_enabled;
> + link->aspm_default = parent->dev_flags & PCI_DEV_FLAGS_ENABLE_ASPM ?
> + ASPM_STATE_ALL : link->aspm_enabled;
So I thought the "pci_enable_link_state(pdev, PCIE_LINK_STATE_ALL)" in
f492edb40b54 would effectively do the same thing:
> > > > > https://git.launchpad.net/~ubuntu-kernel/ubuntu/+source/linux/+git/
> > > > > lunar/commit/?id=1a0102a08f206149d9abd56c2b28877c878b5526
> > > >
> > > > This is "UBUNTU: SAUCE: PCI/ASPM: Enable ASPM for links under VMD
> > > > domain", which adds "link->aspm_default = ASPM_STATE_ALL" for device
> > > > IDs 0x9a09 and 0xa0b0.
> > > >
> > > > This looks like it should also be handled by upstream f492edb40b54
> > > > ("PCI: vmd: Add quirk to configure PCIe ASPM and LTR") [1], which adds
> > > > "pci_enable_link_state(pdev, PCIE_LINK_STATE_ALL)".
But I guess it doesn't actually work. I'm hoping David or Nirmal can
figure out why it doesn't because it seems obvious that it's the
intent.
Thanks a lot for all your work to narrow it down to this!
Bjorn
next prev parent reply other threads:[~2024-12-13 23:02 UTC|newest]
Thread overview: 34+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-11-04 17:13 My AlderLake Dell (XPS-9320) needs these patches to get full standby/low-power modes Kenneth R. Crudup
2023-11-06 18:11 ` Bjorn Helgaas
2023-11-07 11:15 ` Mika Westerberg
2023-11-16 20:10 ` David E. Box
2023-11-16 23:18 ` Bjorn Helgaas
2023-11-16 23:27 ` Matthew Garrett
2023-11-18 0:21 ` David E. Box
2023-12-21 1:19 ` David E. Box
2023-12-27 0:03 ` Bjorn Helgaas
2024-05-13 5:23 ` Kenneth R. Crudup
2023-11-08 15:44 ` Kenneth R. Crudup
2023-11-08 11:45 ` Kai-Heng Feng
2023-11-08 15:46 ` Kenneth R. Crudup
2024-03-12 2:37 ` Kenneth R. Crudup
2024-03-21 10:12 ` Kai-Heng Feng
2024-07-15 18:27 ` Kenneth Crudup
2024-07-17 1:59 ` Kai-Heng Feng
2024-07-17 3:39 ` Kenneth Crudup
2024-07-17 4:40 ` Kenneth Crudup
2024-07-17 23:46 ` Kenneth Crudup
2024-12-11 23:26 ` Kenneth Crudup
2024-12-12 20:56 ` Bjorn Helgaas
2024-12-12 23:04 ` Kenneth Crudup
2024-12-12 23:13 ` Kenneth Crudup
2024-12-13 16:43 ` Bjorn Helgaas
2024-12-13 19:48 ` Kenneth Crudup
2024-12-13 20:27 ` Kenneth Crudup
2024-12-13 22:26 ` Kenneth Crudup
2024-12-13 22:33 ` Kenneth Crudup
2024-12-13 23:02 ` Bjorn Helgaas [this message]
2024-12-19 16:25 ` David E. Box
2024-12-19 18:17 ` Kenneth Crudup
2024-12-19 19:52 ` David E. Box
2024-12-19 20:37 ` Kenneth Crudup
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20241213230214.GA3434438@bhelgaas \
--to=helgaas@kernel.org \
--cc=andrea.righi@canonical.com \
--cc=bhelgaas@google.com \
--cc=david.e.box@linux.intel.com \
--cc=kai.heng.feng@canonical.com \
--cc=kenny@panix.com \
--cc=linux-pci@vger.kernel.org \
--cc=linux-pm@vger.kernel.org \
--cc=nirmal.patel@linux.ntel.com \
--cc=vicamo.yang@canonical.com \
--cc=vidyas@nvidia.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox