From: Svyatoslav Ryhel <clamor95@gmail.com>
To: "Rafael J. Wysocki" <rafael@kernel.org>,
Daniel Lezcano <daniel.lezcano@linaro.org>,
Zhang Rui <rui.zhang@intel.com>,
Lukasz Luba <lukasz.luba@arm.com>, Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>,
Laxman Dewangan <ldewangan@nvidia.com>
Cc: linux-pm@vger.kernel.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org
Subject: [PATCH v2 2/2] thermal: thermal-generic-adc: add temperature sensor channel
Date: Wed, 19 Feb 2025 10:28:17 +0200 [thread overview]
Message-ID: <20250219082817.56339-3-clamor95@gmail.com> (raw)
In-Reply-To: <20250219082817.56339-1-clamor95@gmail.com>
Add IIO sensor channel along with existing thermal sensor cell. This
would benefit devices that use adc sensors to detect temperature and
need a custom conversion table.
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
---
drivers/thermal/thermal-generic-adc.c | 54 ++++++++++++++++++++++++++-
1 file changed, 53 insertions(+), 1 deletion(-)
diff --git a/drivers/thermal/thermal-generic-adc.c b/drivers/thermal/thermal-generic-adc.c
index ee3d0aa31406..a8f3b965b39b 100644
--- a/drivers/thermal/thermal-generic-adc.c
+++ b/drivers/thermal/thermal-generic-adc.c
@@ -7,6 +7,7 @@
* Author: Laxman Dewangan <ldewangan@nvidia.com>
*/
#include <linux/iio/consumer.h>
+#include <linux/iio/iio.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/platform_device.h>
@@ -73,6 +74,57 @@ static const struct thermal_zone_device_ops gadc_thermal_ops = {
.get_temp = gadc_thermal_get_temp,
};
+static const struct iio_chan_spec gadc_thermal_iio_channel[] = {
+ {
+ .type = IIO_TEMP,
+ .info_mask_separate = BIT(IIO_CHAN_INFO_PROCESSED),
+ }
+};
+
+static int gadc_thermal_read_raw(struct iio_dev *indio_dev,
+ struct iio_chan_spec const *chan,
+ int *temp, int *val2, long mask)
+{
+ struct gadc_thermal_info *gtinfo = iio_priv(indio_dev);
+ int ret;
+
+ if (mask != IIO_CHAN_INFO_PROCESSED)
+ return -EINVAL;
+
+ ret = gadc_thermal_get_temp(gtinfo->tz_dev, temp);
+ if (ret < 0)
+ return ret;
+
+ *temp /= 1000;
+
+ return IIO_VAL_INT;
+}
+
+static const struct iio_info gadc_thermal_iio_info = {
+ .read_raw = gadc_thermal_read_raw,
+};
+
+static int gadc_iio_register(struct device *dev, struct gadc_thermal_info *gti)
+{
+ struct gadc_thermal_info *gtinfo;
+ struct iio_dev *indio_dev;
+
+ indio_dev = devm_iio_device_alloc(dev, sizeof(struct gadc_thermal_info));
+ if (!indio_dev)
+ return -ENOMEM;
+
+ gtinfo = iio_priv(indio_dev);
+ memcpy(gtinfo, gti, sizeof(struct gadc_thermal_info));
+
+ indio_dev->name = dev_name(dev);
+ indio_dev->info = &gadc_thermal_iio_info;
+ indio_dev->modes = INDIO_DIRECT_MODE;
+ indio_dev->channels = gadc_thermal_iio_channel;
+ indio_dev->num_channels = ARRAY_SIZE(gadc_thermal_iio_channel);
+
+ return devm_iio_device_register(dev, indio_dev);
+}
+
static int gadc_thermal_read_linear_lookup_table(struct device *dev,
struct gadc_thermal_info *gti)
{
@@ -153,7 +205,7 @@ static int gadc_thermal_probe(struct platform_device *pdev)
devm_thermal_add_hwmon_sysfs(dev, gti->tz_dev);
- return 0;
+ return gadc_iio_register(&pdev->dev, gti);
}
static const struct of_device_id of_adc_thermal_match[] = {
--
2.43.0
next prev parent reply other threads:[~2025-02-19 8:28 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-02-19 8:28 [PATCH v2 0/2] thermal: thermal-generic-adc: add temp sensor function Svyatoslav Ryhel
2025-02-19 8:28 ` [PATCH v2 1/2] dt-bindings: thermal: generic-adc: Add optional io-channel-cells property Svyatoslav Ryhel
2025-02-21 21:13 ` Rob Herring
2025-02-22 7:12 ` Svyatoslav Ryhel
2025-02-19 8:28 ` Svyatoslav Ryhel [this message]
2025-02-28 13:11 ` [PATCH v2 2/2] thermal: thermal-generic-adc: add temperature sensor channel Lukasz Luba
2025-02-28 13:22 ` Svyatoslav Ryhel
2025-03-03 10:53 ` Lukasz Luba
2025-03-03 11:08 ` Svyatoslav Ryhel
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20250219082817.56339-3-clamor95@gmail.com \
--to=clamor95@gmail.com \
--cc=conor+dt@kernel.org \
--cc=daniel.lezcano@linaro.org \
--cc=devicetree@vger.kernel.org \
--cc=krzk+dt@kernel.org \
--cc=ldewangan@nvidia.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pm@vger.kernel.org \
--cc=lukasz.luba@arm.com \
--cc=rafael@kernel.org \
--cc=robh@kernel.org \
--cc=rui.zhang@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox