Re: [PATCH v1 1/2] dt-bindings: power: supply: Document Maxim MAX8971 charger

[Krzysztof Kozlowski <krzk@kernel.org>]

On Fri, Feb 21, 2025 at 11:59:42AM +0200, Svyatoslav Ryhel wrote:
> Add bindings for Maxim MAX8971 charger.
> 
> Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
> ---
>  .../bindings/power/supply/maxim,max8971.yaml  | 133 ++++++++++++++++++
>  1 file changed, 133 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/power/supply/maxim,max8971.yaml
> 
> diff --git a/Documentation/devicetree/bindings/power/supply/maxim,max8971.yaml b/Documentation/devicetree/bindings/power/supply/maxim,max8971.yaml
> new file mode 100644
> index 000000000000..26b37e6f662f
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/power/supply/maxim,max8971.yaml
> @@ -0,0 +1,133 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/power/supply/maxim,max8971.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Maxim MAX8971 IC charger
> +
> +maintainers:
> +  - Svyatoslav Ryhel <clamor95@gmail.com>
> +
> +description:
> +  The MAX8971 is a compact, high-frequency, high-efficiency switch-mode
> +  charger for a one-cell lithium-ion (Li+) battery.
> +
> +properties:
> +  compatible:
> +    const: maxim,max8971
> +
> +  reg:
> +    maxItems: 1
> +
> +  interrupts:
> +    maxItems: 1
> +
> +  extcon:
> +    description:
> +      Special device used to detect type of plug.
> +    $ref: /schemas/types.yaml#/definitions/phandle

You rather miss proper connector or ports. Which device pins are
describbed here?


> +
> +  maxim,fcharge-current-limit-microamp:
> +    description:
> +      Fast-Charge current limit
> +    minimum: 250000
> +    default: 500000
> +    maximum: 1550000
> +
> +  maxim,fcharge-timer-hours:
> +    description: |
> +      Fast-Charge timer in hours. Setting this value 3 and lower or 11 and
> +      higher will disable Fast-Charge timer.
> +    $ref: /schemas/types.yaml#/definitions/uint32
> +    default: 5
> +
> +  maxim,fcharge-rst-threshold-high:
> +    description:
> +      Set Fast-Charge reset threshold to -100 mV
> +    type: boolean
> +
> +  maxim,in-current-limit-microamp:
> +    description:
> +      Input current limit
> +    minimum: 100000
> +    default: 500000
> +    maximum: 1500000
> +
> +  maxim,topoff-timer-minutes:
> +    description:
> +      Top-Off timer minutes
> +    $ref: /schemas/types.yaml#/definitions/uint32
> +    enum: [0, 10, 20, 30, 40, 50, 60, 70]
> +    default: 30
> +
> +  maxim,topoff-current-threshold-microamp:
> +    description:
> +      Top-Off current threshold
> +    enum: [50000, 100000, 150000, 200000]
> +    default: 50000
> +
> +  maxim,fcharge-usb-current-limit-microamp:
> +    description:
> +      Fast-Charge USB current limit
> +    minimum: 100000
> +    default: 500000
> +    maximum: 1500000
> +
> +  maxim,fcharge-ac-current-limit-microamp:
> +    description:
> +      Fast-Charge AC current limit
> +    minimum: 100000
> +    default: 500000
> +    maximum: 1500000
> +
> +  maxim,usb-in-current-limit-microamp:
> +    description:
> +      USB Input current limit
> +    minimum: 100000
> +    default: 500000
> +    maximum: 1500000
> +
> +  maxim,ac-in-current-limit-microamp:
> +    description:
> +      AC Input current limit
> +    minimum: 100000
> +    default: 500000
> +    maximum: 1500000

For all or most of these you miss monitored batter.

> +
> +required:
> +  - compatible
> +  - reg
> +  - interrupts
> +

Missing allOf with ref to power supply.

> +additionalProperties: false

unevaluatedProperties instead, see other bindings.

Best regards,
Krzysztof