[PATCH v2 0/6] TQMa93xx on MBa93xxLA/CA LVDS support

[PATCH v2 0/6] TQMa93xx on MBa93xxLA/CA LVDS support

[Alexander Stein]

Hi,

after a long time (v1 at [1]) this is v2 for the LVDS support on TQMa93xx
module series.

It consists of three parts:
1. New PLL configuration for 477.4 MHz
2. LVDS support for imx93
3. LVDS platform support for tqma9352-mba93xxla & tqma9352-mba93xxca

Patch 1 adds a video PLL configuration for 477.4MHz
Patch 2 is the imx93 equivalent of commit 1cb0c87d27dc ("dt-bindings:
  soc: imx8mp-media-blk-ctrl: Add LDB subnode into schema and example")
Patch 3 is the imx93 equivalent of commit 9cb6d1b39a8f ("soc: imx:
  imx8m-blk-ctrl: Scan subnodes and bind drivers to them")
Patch 4 is the imx93 equivalent of commit 94e6197dadc9 ("arm64: dts:
  imx8mp: Add LCDIF2 & LDB nodes")
Patch 5 adds LVDS DT overlay for tqma9352-mba93xxla platform
Patch 6 adds LVDS DT overlay for tqma9352-mba93xxca platform

Changes in v2:
* Rebased to next-20250221
* Reordered patches
* Added 'ranges' to bindings
* Use subnode constraint styles as suggested by Rob Herring
* Use IMX93_CLK_SYS_PLL_PFD0 as parent for IMX93_CLK_MEDIA_AXI
* Use 333MHz for IMX93_CLK_MEDIA_AXI
* Do not set board compatible in orverlays
* Add MBa93xxCA platform as well

I skipped the support for dynamic PLL configuration for now. This is a
separate task, see [2].

Best regards,
Alexander
    
[1] https://lore.kernel.org/all/20231020130019.665853-1-alexander.stein@ew.tq-group.com/
[2] https://lore.kernel.org/all/20250210160012.783446-1-alexander.stein@ew.tq-group.com/

Alexander Stein (6):
  clk: imx: clk-fracn-gppll: Add 477.4MHz config for video pll
  dt-bindings: soc: imx93-media-blk-ctrl: Add LDB subnode into schema
    and example
  soc: imx: imx93-blk-ctrl: Scan subnodes and bind drivers to them
  arm64: dts: imx93: Add LCDIF & LDB nodes
  arm64: dts: tqma9352-mba93xxla: Add LVDS overlay
  arm64: dts: tqma9352-mba93xxca: Add LVDS overlay

 .../soc/imx/fsl,imx93-media-blk-ctrl.yaml     | 51 ++++++++++++
 arch/arm64/boot/dts/freescale/Makefile        |  5 ++
 ...3-tqma9352-mba93xxca-lvds-tm070jvhg33.dtso | 40 ++++++++++
 .../freescale/imx93-tqma9352-mba93xxca.dts    | 27 +++++++
 ...3-tqma9352-mba93xxla-lvds-tm070jvhg33.dtso | 40 ++++++++++
 .../freescale/imx93-tqma9352-mba93xxla.dts    | 27 +++++++
 arch/arm64/boot/dts/freescale/imx93.dtsi      | 77 +++++++++++++++++++
 drivers/clk/imx/clk-fracn-gppll.c             |  1 +
 drivers/pmdomain/imx/imx93-blk-ctrl.c         |  7 ++
 9 files changed, 275 insertions(+)
 create mode 100644 arch/arm64/boot/dts/freescale/imx93-tqma9352-mba93xxca-lvds-tm070jvhg33.dtso
 create mode 100644 arch/arm64/boot/dts/freescale/imx93-tqma9352-mba93xxla-lvds-tm070jvhg33.dtso

-- 
2.43.0

[PATCH v2 1/6] clk: imx: clk-fracn-gppll: Add 477.4MHz config for video pll

[Alexander Stein]

Add the 477.4MHz frequency support that will be used by video subsystem
on imx93.

Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
---
 drivers/clk/imx/clk-fracn-gppll.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/clk/imx/clk-fracn-gppll.c b/drivers/clk/imx/clk-fracn-gppll.c
index 85771afd4698a..f0c34a02acac3 100644
--- a/drivers/clk/imx/clk-fracn-gppll.c
+++ b/drivers/clk/imx/clk-fracn-gppll.c
@@ -85,6 +85,7 @@ static const struct imx_fracn_gppll_rate_table fracn_tbl[] = {
 	PLL_FRACN_GP(519750000U, 173, 25, 100, 1, 8),
 	PLL_FRACN_GP(498000000U, 166, 0, 1, 0, 8),
 	PLL_FRACN_GP(484000000U, 121, 0, 1, 0, 6),
+	PLL_FRACN_GP(477400000U, 119, 35, 100, 0, 6),
 	PLL_FRACN_GP(445333333U, 167, 0, 1, 0, 9),
 	PLL_FRACN_GP(400000000U, 200, 0, 1, 0, 12),
 	PLL_FRACN_GP(393216000U, 163, 84, 100, 0, 10),
-- 
2.43.0

RE: [PATCH v2 1/6] clk: imx: clk-fracn-gppll: Add 477.4MHz config for video pll

[Peng Fan (OSS)]

> Subject: [PATCH v2 1/6] clk: imx: clk-fracn-gppll: Add 477.4MHz config
> for video pll
> 
> Add the 477.4MHz frequency support that will be used by video
> subsystem on imx93.
> 
> Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>

Reviewed-by: Peng Fan <peng.fan@nxp.com>

[PATCH v2 2/6] dt-bindings: soc: imx93-media-blk-ctrl: Add LDB subnode into schema and example

[Alexander Stein]

Document the LDB bridge subnode and add the subnode into the example.
For the subnode to work, the block control must scan its subnodes and
bind drivers to them, do not misuse either simple-bus or simple-mfd
here.

Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
---
 .../soc/imx/fsl,imx93-media-blk-ctrl.yaml     | 51 +++++++++++++++++++
 1 file changed, 51 insertions(+)

diff --git a/Documentation/devicetree/bindings/soc/imx/fsl,imx93-media-blk-ctrl.yaml b/Documentation/devicetree/bindings/soc/imx/fsl,imx93-media-blk-ctrl.yaml
index b3554e7f9e76d..d914dea6ecbb5 100644
--- a/Documentation/devicetree/bindings/soc/imx/fsl,imx93-media-blk-ctrl.yaml
+++ b/Documentation/devicetree/bindings/soc/imx/fsl,imx93-media-blk-ctrl.yaml
@@ -24,6 +24,14 @@ properties:
   reg:
     maxItems: 1
 
+  ranges: true
+
+  '#address-cells':
+    const: 1
+
+  '#size-cells':
+    const: 1
+
   '#power-domain-cells':
     const: 1
 
@@ -46,9 +54,20 @@ properties:
       - const: csi
       - const: dsi
 
+  bridge@20:
+    type: object
+    additionalProperties: true
+    properties:
+      compatible:
+        contains:
+          const: fsl,imx93-ldb
+
 required:
   - compatible
   - reg
+  - ranges
+  - '#address-cells'
+  - '#size-cells'
   - power-domains
   - clocks
   - clock-names
@@ -77,4 +96,36 @@ examples:
                clock-names = "apb", "axi", "nic", "disp", "cam",
                              "pxp", "lcdif", "isi", "csi", "dsi";
       #power-domain-cells = <1>;
+      #address-cells = <1>;
+      #size-cells = <1>;
+      ranges;
+
+      bridge@20 {
+          compatible = "fsl,imx93-ldb";
+          reg = <0x20 0x4>, <0x24 0x4>;
+          reg-names = "ldb", "lvds";
+          clocks = <&clk IMX93_CLK_LVDS_GATE>;
+          clock-names = "ldb";
+
+          ports {
+              #address-cells = <1>;
+              #size-cells = <0>;
+
+              port@0 {
+                  reg = <0>;
+
+                  ldb_from_lcdif2: endpoint {
+                      remote-endpoint = <&lcdif2_to_ldb>;
+                  };
+              };
+
+              port@1 {
+                  reg = <1>;
+
+                  ldb_lvds: endpoint {
+                      remote-endpoint = <&ldb_to_panel>;
+                  };
+              };
+          };
+        };
     };
-- 
2.43.0

Re: [PATCH v2 2/6] dt-bindings: soc: imx93-media-blk-ctrl: Add LDB subnode into schema and example

[Rob Herring]

On Mon, Feb 24, 2025 at 03:28:23PM +0100, Alexander Stein wrote:
> Document the LDB bridge subnode and add the subnode into the example.
> For the subnode to work, the block control must scan its subnodes and
> bind drivers to them, do not misuse either simple-bus or simple-mfd
> here.
> 
> Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
> ---
>  .../soc/imx/fsl,imx93-media-blk-ctrl.yaml     | 51 +++++++++++++++++++
>  1 file changed, 51 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/soc/imx/fsl,imx93-media-blk-ctrl.yaml b/Documentation/devicetree/bindings/soc/imx/fsl,imx93-media-blk-ctrl.yaml
> index b3554e7f9e76d..d914dea6ecbb5 100644
> --- a/Documentation/devicetree/bindings/soc/imx/fsl,imx93-media-blk-ctrl.yaml
> +++ b/Documentation/devicetree/bindings/soc/imx/fsl,imx93-media-blk-ctrl.yaml
> @@ -24,6 +24,14 @@ properties:
>    reg:
>      maxItems: 1
>  
> +  ranges: true
> +
> +  '#address-cells':
> +    const: 1
> +
> +  '#size-cells':
> +    const: 1
> +
>    '#power-domain-cells':
>      const: 1
>  
> @@ -46,9 +54,20 @@ properties:
>        - const: csi
>        - const: dsi
>  
> +  bridge@20:
> +    type: object
> +    additionalProperties: true
> +    properties:
> +      compatible:
> +        contains:
> +          const: fsl,imx93-ldb
> +
>  required:
>    - compatible
>    - reg
> +  - ranges
> +  - '#address-cells'
> +  - '#size-cells'
>    - power-domains
>    - clocks
>    - clock-names
> @@ -77,4 +96,36 @@ examples:
>                 clock-names = "apb", "axi", "nic", "disp", "cam",
>                               "pxp", "lcdif", "isi", "csi", "dsi";
>        #power-domain-cells = <1>;
> +      #address-cells = <1>;
> +      #size-cells = <1>;
> +      ranges;

Given the address below is 0x20, this looks wrong unless the parent 
address is 0.

> +
> +      bridge@20 {
> +          compatible = "fsl,imx93-ldb";
> +          reg = <0x20 0x4>, <0x24 0x4>;
> +          reg-names = "ldb", "lvds";
> +          clocks = <&clk IMX93_CLK_LVDS_GATE>;
> +          clock-names = "ldb";
> +
> +          ports {
> +              #address-cells = <1>;
> +              #size-cells = <0>;
> +
> +              port@0 {
> +                  reg = <0>;
> +
> +                  ldb_from_lcdif2: endpoint {
> +                      remote-endpoint = <&lcdif2_to_ldb>;
> +                  };
> +              };
> +
> +              port@1 {
> +                  reg = <1>;
> +
> +                  ldb_lvds: endpoint {
> +                      remote-endpoint = <&ldb_to_panel>;
> +                  };
> +              };
> +          };
> +        };
>      };
> -- 
> 2.43.0
> 

Re: [PATCH v2 2/6] dt-bindings: soc: imx93-media-blk-ctrl: Add LDB subnode into schema and example

[Alexander Stein]

Am Dienstag, 25. Februar 2025, 15:52:54 CET schrieb Rob Herring:
> ********************
> Achtung externe E-Mail: Öffnen Sie Anhänge und Links nur, wenn Sie wissen, dass diese aus einer sicheren Quelle stammen und sicher sind. Leiten Sie die E-Mail im Zweifelsfall zur Prüfung an den IT-Helpdesk weiter.
> Attention external email: Open attachments and links only if you know that they are from a secure source and are safe. In doubt forward the email to the IT-Helpdesk to check it.
> ********************
> 
> On Mon, Feb 24, 2025 at 03:28:23PM +0100, Alexander Stein wrote:
> > Document the LDB bridge subnode and add the subnode into the example.
> > For the subnode to work, the block control must scan its subnodes and
> > bind drivers to them, do not misuse either simple-bus or simple-mfd
> > here.
> > 
> > Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
> > ---
> >  .../soc/imx/fsl,imx93-media-blk-ctrl.yaml     | 51 +++++++++++++++++++
> >  1 file changed, 51 insertions(+)
> > 
> > diff --git a/Documentation/devicetree/bindings/soc/imx/fsl,imx93-media-blk-ctrl.yaml b/Documentation/devicetree/bindings/soc/imx/fsl,imx93-media-blk-ctrl.yaml
> > index b3554e7f9e76d..d914dea6ecbb5 100644
> > --- a/Documentation/devicetree/bindings/soc/imx/fsl,imx93-media-blk-ctrl.yaml
> > +++ b/Documentation/devicetree/bindings/soc/imx/fsl,imx93-media-blk-ctrl.yaml
> > @@ -24,6 +24,14 @@ properties:
> >    reg:
> >      maxItems: 1
> >  
> > +  ranges: true
> > +
> > +  '#address-cells':
> > +    const: 1
> > +
> > +  '#size-cells':
> > +    const: 1
> > +
> >    '#power-domain-cells':
> >      const: 1
> >  
> > @@ -46,9 +54,20 @@ properties:
> >        - const: csi
> >        - const: dsi
> >  
> > +  bridge@20:
> > +    type: object
> > +    additionalProperties: true
> > +    properties:
> > +      compatible:
> > +        contains:
> > +          const: fsl,imx93-ldb
> > +
> >  required:
> >    - compatible
> >    - reg
> > +  - ranges
> > +  - '#address-cells'
> > +  - '#size-cells'
> >    - power-domains
> >    - clocks
> >    - clock-names
> > @@ -77,4 +96,36 @@ examples:
> >                 clock-names = "apb", "axi", "nic", "disp", "cam",
> >                               "pxp", "lcdif", "isi", "csi", "dsi";
> >        #power-domain-cells = <1>;
> > +      #address-cells = <1>;
> > +      #size-cells = <1>;
> > +      ranges;
> 
> Given the address below is 0x20, this looks wrong unless the parent 
> address is 0.

Thanks for pointing out. Because system-controller@4ac10000 is not
a simple-bus I assume this needs explicit ranges, as you pointed out in
your comment on Patch 4, no?

Best regards,
Alexander

> > +
> > +      bridge@20 {
> > +          compatible = "fsl,imx93-ldb";
> > +          reg = <0x20 0x4>, <0x24 0x4>;
> > +          reg-names = "ldb", "lvds";
> > +          clocks = <&clk IMX93_CLK_LVDS_GATE>;
> > +          clock-names = "ldb";
> > +
> > +          ports {
> > +              #address-cells = <1>;
> > +              #size-cells = <0>;
> > +
> > +              port@0 {
> > +                  reg = <0>;
> > +
> > +                  ldb_from_lcdif2: endpoint {
> > +                      remote-endpoint = <&lcdif2_to_ldb>;
> > +                  };
> > +              };
> > +
> > +              port@1 {
> > +                  reg = <1>;
> > +
> > +                  ldb_lvds: endpoint {
> > +                      remote-endpoint = <&ldb_to_panel>;
> > +                  };
> > +              };
> > +          };
> > +        };
> >      };
> 


-- 
TQ-Systems GmbH | Mühlstraße 2, Gut Delling | 82229 Seefeld, Germany
Amtsgericht München, HRB 105018
Geschäftsführer: Detlef Schneider, Rüdiger Stahl, Stefan Schneider
http://www.tq-group.com/

[PATCH v2 3/6] soc: imx: imx93-blk-ctrl: Scan subnodes and bind drivers to them

[Alexander Stein]

This particular block can have DT subnodes describing the LVDS LDB
bridge. Instead of misusing simple-bus to scan for those nodes, do
the scan within the driver.

Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
---
 drivers/pmdomain/imx/imx93-blk-ctrl.c | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/drivers/pmdomain/imx/imx93-blk-ctrl.c b/drivers/pmdomain/imx/imx93-blk-ctrl.c
index 0e2ba8ec55d75..fe2ff7a457502 100644
--- a/drivers/pmdomain/imx/imx93-blk-ctrl.c
+++ b/drivers/pmdomain/imx/imx93-blk-ctrl.c
@@ -7,6 +7,7 @@
 #include <linux/device.h>
 #include <linux/module.h>
 #include <linux/of.h>
+#include <linux/of_platform.h>
 #include <linux/platform_device.h>
 #include <linux/pm_domain.h>
 #include <linux/pm_runtime.h>
@@ -297,8 +298,14 @@ static int imx93_blk_ctrl_probe(struct platform_device *pdev)
 
 	dev_set_drvdata(dev, bc);
 
+	ret = devm_of_platform_populate(dev);
+	if (ret)
+		goto cleanup_provider;
+
 	return 0;
 
+cleanup_provider:
+	of_genpd_del_provider(dev->of_node);
 cleanup_pds:
 	for (i--; i >= 0; i--)
 		pm_genpd_remove(&bc->domains[i].genpd);
-- 
2.43.0

RE: [PATCH v2 3/6] soc: imx: imx93-blk-ctrl: Scan subnodes and bind drivers to them

[Peng Fan]

> Subject: [PATCH v2 3/6] soc: imx: imx93-blk-ctrl: Scan subnodes and
> bind drivers to them

Typo: soc->pmdomain

> 
> This particular block can have DT subnodes describing the LVDS LDB
> bridge. Instead of misusing simple-bus to scan for those nodes, do the
> scan within the driver.
> 
> Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>

Reviewed-by: Peng Fan <peng.fan@nxp.com>

[PATCH v2 4/6] arm64: dts: imx93: Add LCDIF & LDB nodes

[Alexander Stein]

LCDIF port 1 is directly attached to the LVDS Display Bridge (LDB).
Both need the same clock source (VIDEO_PLL1).

Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
---
 arch/arm64/boot/dts/freescale/imx93.dtsi | 77 ++++++++++++++++++++++++
 1 file changed, 77 insertions(+)

diff --git a/arch/arm64/boot/dts/freescale/imx93.dtsi b/arch/arm64/boot/dts/freescale/imx93.dtsi
index 56766fdb0b1e5..2628e1e628ec2 100644
--- a/arch/arm64/boot/dts/freescale/imx93.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx93.dtsi
@@ -1273,6 +1273,9 @@ s4muap: mailbox@47520000 {
 		media_blk_ctrl: system-controller@4ac10000 {
 			compatible = "fsl,imx93-media-blk-ctrl", "syscon";
 			reg = <0x4ac10000 0x10000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
 			power-domains = <&mediamix>;
 			clocks = <&clk IMX93_CLK_MEDIA_APB>,
 				 <&clk IMX93_CLK_MEDIA_AXI>,
@@ -1286,8 +1289,82 @@ media_blk_ctrl: system-controller@4ac10000 {
 				 <&clk IMX93_CLK_MIPI_DSI_GATE>;
 			clock-names = "apb", "axi", "nic", "disp", "cam",
 				      "pxp", "lcdif", "isi", "csi", "dsi";
+			assigned-clocks = <&clk IMX93_CLK_MEDIA_AXI>,
+					  <&clk IMX93_CLK_MEDIA_APB>,
+					  <&clk IMX93_CLK_VIDEO_PLL>,
+					  <&clk IMX93_CLK_MEDIA_DISP_PIX>;
+			assigned-clock-parents = <&clk IMX93_CLK_SYS_PLL_PFD0>,
+						 <&clk IMX93_CLK_SYS_PLL_PFD1_DIV2>,
+						 <&clk IMX93_CLK_24M>,
+						 <&clk IMX93_CLK_VIDEO_PLL>;
+			assigned-clock-rates = <333333333>, <133333333>, <0>, <200000000>;
 			#power-domain-cells = <1>;
 			status = "disabled";
+
+			lvds_bridge: bridge@20 {
+				compatible = "fsl,imx93-ldb";
+				reg = <0x20 0x4>, <0x24 0x4>;
+				reg-names = "ldb", "lvds";
+				clocks = <&clk IMX93_CLK_LVDS_GATE>;
+				clock-names = "ldb";
+				assigned-clocks = <&clk IMX93_CLK_MEDIA_LDB>;
+				assigned-clock-parents = <&clk IMX93_CLK_VIDEO_PLL>;
+				status = "disabled";
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+
+						ldb_from_lcdif: endpoint {
+							remote-endpoint = <&lcdif_to_ldb>;
+						};
+					};
+
+					port@1 {
+						reg = <1>;
+
+						ldb_lvds: endpoint {
+						};
+					};
+				};
+			};
+		};
+
+		lcdif: display-controller@4ae30000 {
+			compatible = "fsl,imx93-lcdif";
+			reg = <0x4ae30000 0x23c>;
+			interrupts = <GIC_SPI 176 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk IMX93_CLK_MEDIA_DISP_PIX>,
+				 <&clk IMX93_CLK_LCDIF_GATE>,
+				 <&clk IMX93_CLK_MEDIA_AXI>;
+			clock-names = "pix", "axi", "disp_axi";
+			assigned-clocks = <&clk IMX93_CLK_VIDEO_PLL>,
+					  <&clk IMX93_CLK_MEDIA_DISP_PIX>;
+			assigned-clock-parents = <&clk IMX93_CLK_24M>,
+						 <&clk IMX93_CLK_VIDEO_PLL>;
+			power-domains = <&media_blk_ctrl IMX93_MEDIABLK_PD_LCDIF>;
+			status = "disabled";
+
+			port {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				lcdif_to_dsi: endpoint@0 {
+					reg = <0>;
+				};
+
+				lcdif_to_ldb: endpoint@1 {
+					reg = <1>;
+					remote-endpoint = <&ldb_from_lcdif>;
+				};
+
+				lcdif_to_dpi: endpoint@2 {
+					reg = <2>;
+				};
+			};
 		};
 
 		usbotg1: usb@4c100000 {
-- 
2.43.0

Re: [PATCH v2 4/6] arm64: dts: imx93: Add LCDIF & LDB nodes

[Rob Herring]

On Mon, Feb 24, 2025 at 03:28:25PM +0100, Alexander Stein wrote:
> LCDIF port 1 is directly attached to the LVDS Display Bridge (LDB).
> Both need the same clock source (VIDEO_PLL1).
> 
> Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
> ---
>  arch/arm64/boot/dts/freescale/imx93.dtsi | 77 ++++++++++++++++++++++++
>  1 file changed, 77 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/freescale/imx93.dtsi b/arch/arm64/boot/dts/freescale/imx93.dtsi
> index 56766fdb0b1e5..2628e1e628ec2 100644
> --- a/arch/arm64/boot/dts/freescale/imx93.dtsi
> +++ b/arch/arm64/boot/dts/freescale/imx93.dtsi
> @@ -1273,6 +1273,9 @@ s4muap: mailbox@47520000 {
>  		media_blk_ctrl: system-controller@4ac10000 {
>  			compatible = "fsl,imx93-media-blk-ctrl", "syscon";
>  			reg = <0x4ac10000 0x10000>;
> +			#address-cells = <1>;
> +			#size-cells = <1>;
> +			ranges;

Like the example, this is wrong.

ranges = <0x0 0x4ac10000 0x10000>;

Rob

[PATCH v2 5/6] arm64: dts: tqma9352-mba93xxla: Add LVDS overlay

[Alexander Stein]

This adds the overlay for the Tianma TM070JVHG33 LVDS display.

Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
---
 arch/arm64/boot/dts/freescale/Makefile        |  3 ++
 ...3-tqma9352-mba93xxla-lvds-tm070jvhg33.dtso | 40 +++++++++++++++++++
 .../freescale/imx93-tqma9352-mba93xxla.dts    | 27 +++++++++++++
 3 files changed, 70 insertions(+)
 create mode 100644 arch/arm64/boot/dts/freescale/imx93-tqma9352-mba93xxla-lvds-tm070jvhg33.dtso

diff --git a/arch/arm64/boot/dts/freescale/Makefile b/arch/arm64/boot/dts/freescale/Makefile
index 839432153cc7a..0af5eb771cd20 100644
--- a/arch/arm64/boot/dts/freescale/Makefile
+++ b/arch/arm64/boot/dts/freescale/Makefile
@@ -283,6 +283,9 @@ dtb-$(CONFIG_ARCH_MXC) += imx93-tqma9352-mba93xxla.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx93-var-som-symphony.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx95-19x19-evk.dtb
 
+imx93-tqma9352-mba93xxla-lvds-tm070jvhg33-dtbs += imx93-tqma9352-mba93xxla.dtb imx93-tqma9352-mba93xxla-lvds-tm070jvhg33.dtbo
+dtb-$(CONFIG_ARCH_MXC) += imx93-tqma9352-mba93xxla-lvds-tm070jvhg33.dtb
+
 imx8mm-kontron-dl-dtbs			:= imx8mm-kontron-bl.dtb imx8mm-kontron-dl.dtbo
 
 dtb-$(CONFIG_ARCH_MXC) += imx8mm-kontron-dl.dtb
diff --git a/arch/arm64/boot/dts/freescale/imx93-tqma9352-mba93xxla-lvds-tm070jvhg33.dtso b/arch/arm64/boot/dts/freescale/imx93-tqma9352-mba93xxla-lvds-tm070jvhg33.dtso
new file mode 100644
index 0000000000000..c723a19f03d63
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx93-tqma9352-mba93xxla-lvds-tm070jvhg33.dtso
@@ -0,0 +1,40 @@
+// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT)
+/*
+ * Copyright (c) 2023 TQ-Systems GmbH <linux@ew.tq-group.com>,
+ * D-82229 Seefeld, Germany.
+ * Author: Alexander Stein
+ */
+
+#include <dt-bindings/clock/imx93-clock.h>
+#include <dt-bindings/gpio/gpio.h>
+
+/dts-v1/;
+/plugin/;
+
+&backlight_lvds {
+	status = "okay";
+};
+
+&display {
+	compatible = "tianma,tm070jvhg33";
+	status = "okay";
+};
+
+&lcdif {
+	assigned-clocks = <&clk IMX93_CLK_VIDEO_PLL>,
+			  <&clk IMX93_CLK_MEDIA_DISP_PIX>;
+	assigned-clock-rates = <477400000>;
+	status = "okay";
+};
+
+&lvds_bridge {
+	status = "okay";
+};
+
+&media_blk_ctrl {
+	status = "okay";
+};
+
+&tpm5 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/freescale/imx93-tqma9352-mba93xxla.dts b/arch/arm64/boot/dts/freescale/imx93-tqma9352-mba93xxla.dts
index 9e88c42c3d170..4618f836345fc 100644
--- a/arch/arm64/boot/dts/freescale/imx93-tqma9352-mba93xxla.dts
+++ b/arch/arm64/boot/dts/freescale/imx93-tqma9352-mba93xxla.dts
@@ -48,6 +48,23 @@ clk_dp: clk-dp {
 		clock-frequency = <26000000>;
 	};
 
+	display: display {
+		/*
+		 * Display is not fixed, so compatible has to be added from
+		 * DT overlay
+		 */
+		power-supply = <&reg_3v3>;
+		enable-gpios = <&expander2 1 GPIO_ACTIVE_HIGH>;
+		backlight = <&backlight_lvds>;
+		status = "disabled";
+
+		port {
+			panel_in_lvds0: endpoint {
+				remote-endpoint = <&ldb_lvds>;
+			};
+		};
+	};
+
 	gpio-keys {
 		compatible = "gpio-keys";
 		autorepeat;
@@ -509,6 +526,16 @@ &lpuart8 {
 	status = "okay";
 };
 
+&lvds_bridge {
+	ports {
+		port@1 {
+			ldb_lvds: endpoint {
+				remote-endpoint = <&panel_in_lvds0>;
+			};
+		};
+	};
+};
+
 &pcf85063 {
 	/* RTC_EVENT# from SoM is connected on mainboard */
 	pinctrl-names = "default";
-- 
2.43.0

[PATCH v2 6/6] arm64: dts: tqma9352-mba93xxca: Add LVDS overlay

[Alexander Stein]

This adds the overlay for the Tianma TM070JVHG33 LVDS display.

Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
---
 arch/arm64/boot/dts/freescale/Makefile        |  2 +
 ...3-tqma9352-mba93xxca-lvds-tm070jvhg33.dtso | 40 +++++++++++++++++++
 .../freescale/imx93-tqma9352-mba93xxca.dts    | 27 +++++++++++++
 3 files changed, 69 insertions(+)
 create mode 100644 arch/arm64/boot/dts/freescale/imx93-tqma9352-mba93xxca-lvds-tm070jvhg33.dtso

diff --git a/arch/arm64/boot/dts/freescale/Makefile b/arch/arm64/boot/dts/freescale/Makefile
index 0af5eb771cd20..b7add640f8971 100644
--- a/arch/arm64/boot/dts/freescale/Makefile
+++ b/arch/arm64/boot/dts/freescale/Makefile
@@ -283,7 +283,9 @@ dtb-$(CONFIG_ARCH_MXC) += imx93-tqma9352-mba93xxla.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx93-var-som-symphony.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx95-19x19-evk.dtb
 
+imx93-tqma9352-mba93xxca-lvds-tm070jvhg33-dtbs += imx93-tqma9352-mba93xxca.dtb imx93-tqma9352-mba93xxca-lvds-tm070jvhg33.dtbo
 imx93-tqma9352-mba93xxla-lvds-tm070jvhg33-dtbs += imx93-tqma9352-mba93xxla.dtb imx93-tqma9352-mba93xxla-lvds-tm070jvhg33.dtbo
+dtb-$(CONFIG_ARCH_MXC) += imx93-tqma9352-mba93xxca-lvds-tm070jvhg33.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx93-tqma9352-mba93xxla-lvds-tm070jvhg33.dtb
 
 imx8mm-kontron-dl-dtbs			:= imx8mm-kontron-bl.dtb imx8mm-kontron-dl.dtbo
diff --git a/arch/arm64/boot/dts/freescale/imx93-tqma9352-mba93xxca-lvds-tm070jvhg33.dtso b/arch/arm64/boot/dts/freescale/imx93-tqma9352-mba93xxca-lvds-tm070jvhg33.dtso
new file mode 100644
index 0000000000000..d21e5ccca2e93
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx93-tqma9352-mba93xxca-lvds-tm070jvhg33.dtso
@@ -0,0 +1,40 @@
+// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT)
+/*
+ * Copyright (c) 2025 TQ-Systems GmbH <linux@ew.tq-group.com>,
+ * D-82229 Seefeld, Germany.
+ * Author: Alexander Stein
+ */
+
+#include <dt-bindings/clock/imx93-clock.h>
+#include <dt-bindings/gpio/gpio.h>
+
+/dts-v1/;
+/plugin/;
+
+&backlight_lvds {
+	status = "okay";
+};
+
+&display {
+	compatible = "tianma,tm070jvhg33";
+	status = "okay";
+};
+
+&lcdif {
+	assigned-clocks = <&clk IMX93_CLK_VIDEO_PLL>,
+			  <&clk IMX93_CLK_MEDIA_DISP_PIX>;
+	assigned-clock-rates = <477400000>;
+	status = "okay";
+};
+
+&lvds_bridge {
+	status = "okay";
+};
+
+&media_blk_ctrl {
+	status = "okay";
+};
+
+&tpm5 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/freescale/imx93-tqma9352-mba93xxca.dts b/arch/arm64/boot/dts/freescale/imx93-tqma9352-mba93xxca.dts
index ebbac5f8d2b2d..e70c3995e89da 100644
--- a/arch/arm64/boot/dts/freescale/imx93-tqma9352-mba93xxca.dts
+++ b/arch/arm64/boot/dts/freescale/imx93-tqma9352-mba93xxca.dts
@@ -42,6 +42,23 @@ backlight_lvds: backlight {
 		status = "disabled";
 	};
 
+	display: display {
+		/*
+		 * Display is not fixed, so compatible has to be added from
+		 * DT overlay
+		 */
+		power-supply = <&reg_3v3>;
+		enable-gpios = <&expander2 1 GPIO_ACTIVE_HIGH>;
+		backlight = <&backlight_lvds>;
+		status = "disabled";
+
+		port {
+			panel_in_lvds0: endpoint {
+				remote-endpoint = <&ldb_lvds>;
+			};
+		};
+	};
+
 	fan0: pwm-fan {
 		compatible = "pwm-fan";
 		pinctrl-names = "default";
@@ -546,6 +563,16 @@ &lpuart8 {
 	status = "okay";
 };
 
+&lvds_bridge {
+	ports {
+		port@1 {
+			ldb_lvds: endpoint {
+				remote-endpoint = <&panel_in_lvds0>;
+			};
+		};
+	};
+};
+
 &pcf85063 {
 	/* RTC_EVENT# from SoM is connected on mainboard */
 	pinctrl-names = "default";
-- 
2.43.0