[PATCH AUTOSEL 5.15 011/153] thermal/drivers/qoriq: Power down TMU on system suspend

[PATCH AUTOSEL 5.15 011/153] thermal/drivers/qoriq: Power down TMU on system suspend

[Sasha Levin]

From: Alice Guo <alice.guo@nxp.com>

[ Upstream commit 229f3feb4b0442835b27d519679168bea2de96c2 ]

Enable power-down of TMU (Thermal Management Unit) for TMU version 2 during
system suspend to save power. Save approximately 4.3mW on VDD_ANA_1P8 on
i.MX93 platforms.

Signed-off-by: Alice Guo <alice.guo@nxp.com>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Link: https://lore.kernel.org/r/20241209164859.3758906-2-Frank.Li@nxp.com
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/thermal/qoriq_thermal.c | 13 +++++++++++++
 1 file changed, 13 insertions(+)

diff --git a/drivers/thermal/qoriq_thermal.c b/drivers/thermal/qoriq_thermal.c
index 73049f9bea252..34a5fbcc3d200 100644
--- a/drivers/thermal/qoriq_thermal.c
+++ b/drivers/thermal/qoriq_thermal.c
@@ -19,6 +19,7 @@
 #define SITES_MAX		16
 #define TMR_DISABLE		0x0
 #define TMR_ME			0x80000000
+#define TMR_CMD			BIT(29)
 #define TMR_ALPF		0x0c000000
 #define TMR_ALPF_V2		0x03000000
 #define TMTMIR_DEFAULT	0x0000000f
@@ -345,6 +346,12 @@ static int __maybe_unused qoriq_tmu_suspend(struct device *dev)
 	if (ret)
 		return ret;
 
+	if (data->ver > TMU_VER1) {
+		ret = regmap_set_bits(data->regmap, REGS_TMR, TMR_CMD);
+		if (ret)
+			return ret;
+	}
+
 	clk_disable_unprepare(data->clk);
 
 	return 0;
@@ -359,6 +366,12 @@ static int __maybe_unused qoriq_tmu_resume(struct device *dev)
 	if (ret)
 		return ret;
 
+	if (data->ver > TMU_VER1) {
+		ret = regmap_clear_bits(data->regmap, REGS_TMR, TMR_CMD);
+		if (ret)
+			return ret;
+	}
+
 	/* Enable monitoring */
 	return regmap_update_bits(data->regmap, REGS_TMR, TMR_ME, TMR_ME);
 }
-- 
2.39.5

[PATCH AUTOSEL 5.15 054/153] cpufreq: tegra186: Share policy per cluster

[Sasha Levin]

From: Aaron Kling <luceoscutum@gmail.com>

[ Upstream commit be4ae8c19492cd6d5de61ccb34ffb3f5ede5eec8 ]

This functionally brings tegra186 in line with tegra210 and tegra194,
sharing a cpufreq policy between all cores in a cluster.

Reviewed-by: Sumit Gupta <sumitg@nvidia.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Aaron Kling <webgeek1234@gmail.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/cpufreq/tegra186-cpufreq.c | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/drivers/cpufreq/tegra186-cpufreq.c b/drivers/cpufreq/tegra186-cpufreq.c
index 5d1943e787b0c..19597246f9ccb 100644
--- a/drivers/cpufreq/tegra186-cpufreq.c
+++ b/drivers/cpufreq/tegra186-cpufreq.c
@@ -73,11 +73,18 @@ static int tegra186_cpufreq_init(struct cpufreq_policy *policy)
 {
 	struct tegra186_cpufreq_data *data = cpufreq_get_driver_data();
 	unsigned int cluster = data->cpus[policy->cpu].bpmp_cluster_id;
+	u32 cpu;
 
 	policy->freq_table = data->clusters[cluster].table;
 	policy->cpuinfo.transition_latency = 300 * 1000;
 	policy->driver_data = NULL;
 
+	/* set same policy for all cpus in a cluster */
+	for (cpu = 0; cpu < ARRAY_SIZE(tegra186_cpus); cpu++) {
+		if (data->cpus[cpu].bpmp_cluster_id == cluster)
+			cpumask_set_cpu(cpu, policy->cpus);
+	}
+
 	return 0;
 }
 
-- 
2.39.5

[PATCH AUTOSEL 5.15 092/153] cpuidle: menu: Avoid discarding useful information

[Sasha Levin]

From: "Rafael J. Wysocki" <rafael.j.wysocki@intel.com>

[ Upstream commit 85975daeaa4d6ec560bfcd354fc9c08ad7f38888 ]

When giving up on making a high-confidence prediction,
get_typical_interval() always returns UINT_MAX which means that the
next idle interval prediction will be based entirely on the time till
the next timer.  However, the information represented by the most
recent intervals may not be completely useless in those cases.

Namely, the largest recent idle interval is an upper bound on the
recently observed idle duration, so it is reasonable to assume that
the next idle duration is unlikely to exceed it.  Moreover, this is
still true after eliminating the suspected outliers if the sample
set still under consideration is at least as large as 50% of the
maximum sample set size.

Accordingly, make get_typical_interval() return the current maximum
recent interval value in that case instead of UINT_MAX.

Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reported-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Tested-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Reviewed-by: Christian Loehle <christian.loehle@arm.com>
Tested-by: Christian Loehle <christian.loehle@arm.com>
Tested-by: Aboorva Devarajan <aboorvad@linux.ibm.com>
Link: https://patch.msgid.link/7770672.EvYhyI6sBW@rjwysocki.net
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/cpuidle/governors/menu.c | 13 ++++++++++++-
 1 file changed, 12 insertions(+), 1 deletion(-)

diff --git a/drivers/cpuidle/governors/menu.c b/drivers/cpuidle/governors/menu.c
index 2e5670446991f..e1e2721beb75b 100644
--- a/drivers/cpuidle/governors/menu.c
+++ b/drivers/cpuidle/governors/menu.c
@@ -249,8 +249,19 @@ static unsigned int get_typical_interval(struct menu_device *data,
 	 * This can deal with workloads that have long pauses interspersed
 	 * with sporadic activity with a bunch of short pauses.
 	 */
-	if ((divisor * 4) <= INTERVALS * 3)
+	if (divisor * 4 <= INTERVALS * 3) {
+		/*
+		 * If there are sufficiently many data points still under
+		 * consideration after the outliers have been eliminated,
+		 * returning without a prediction would be a mistake because it
+		 * is likely that the next interval will not exceed the current
+		 * maximum, so return the latter in that case.
+		 */
+		if (divisor >= INTERVALS / 2)
+			return max;
+
 		return UINT_MAX;
+	}
 
 	thresh = max - 1;
 	goto again;
-- 
2.39.5